[English]
論文・解説等のリスト 原典へリンク付き
鈴木亮輔 R.O.Suzuki
10 Nov 2023
334) 鈴木亮輔, エルテファト アフマディ
"新プロセス: TiSxを経由するTiNからのTi粉末製造"、チタン 71 [4] (2023) 296-300.
333) T. Fujimura, K. Takeshita, R.O. Suzuki,
"Analysis of the Solidus Temperature of Multicomponent Steel by a Finite Thickness Model with Heat- and Solute-Transfer Equations in the Solid–Liquid Zone,"
Metall. Mater. Trans. B., 53 (2022) 1411-435. DOI: 10.1007/s11663-022-02429-1 
.
332) Shungo Natsui, Ryota Shibuya, Ryosuke O. Suzuki, Tatsuya Kikuchi, Akihisa Ito, Takahiro Sato, Rei Yamamoto and Hiroshi Nogami,
"Quantification of the Impact of Residual H2O on Cathodic Behavior in Molten CaCl2 Electrolysis",
J. Sustainable Metallurgy, 8, (2022) pp.532–540. DOI: 10.1007/s40831-022-00516-w .
331) Tatsuya Kikuchi, Motoki Yamashita, Mana Iwai, Ryosuke O. Suzuki
"Self-Ordering of Porous Anodic Alumina Fabricated by Anodizing in Chromic Acid at High Temperature",
J. Electrochem. Soc., 168 (2021) 093501 DOI:10.1149/1945-7111/ac2101 .
330) Ryosuke O. Suzuki, Shungo Natsui, Tatsuya Kikuchi
"Recent Studies on Titanium Refining: 2017–2020"
Mater. Trans., 62 [6] (2021) 905-913. DOI: 10.2320/matertrans.MT-M2020373.
329) Mana Iwai, Tatsuya Kikuchi, Ryosuke O. Suzuki,
"Self-ordered nanospike porous alumina fabricated under a new regime by an anodizing process in alkaline media",
Scientific Reports, 11, (2021) 7240 DOI: 10.1038/s41598-021-86696-z .
328) Eltefat Ahmadi, Ryosuke O. Suzuki,
"Tantalum MetalProduction Through High-Efficiency Electrochemical Reduction of TaS2 in Molten CaCl2",
Journal of Sustainable Metallurgy, 7 (2021) 437-447. DOI: 10.1007/s40831-021-00347-1 .
327) Ryosuke O. Suzuki, Yuta Yashima, Takumi Kaneko, Eltefat Ahmadi, Tatsuya Kikuchi, Takafumi Watanabe and Genki Nogami
"Synthesis of Silicon Sulfide by Using CS2 Gas",
Metall. Mater. Trans. B, 52 (2021) 1379-1391. DOI: 10.1007/s11663-021-02103-y .
326) Tatsuya Kikuchi, Fumiya Onoda, Mana Iwai, Ryosuke O. Suzuki
"Influence of sub-10 nm anodic alumina nanowire morphology formed by two-step anodizing aluminum on water wettability and slipping behavior",
Applied Surface Science, 546 (2021) 149090. DOI: 10.1016/j.apsusc.2021.149090 .
325) Eltefat Ahmadi, Ryosuke O. Suzuki, Takumi Kaneko, Tatsuya Kikuchi,
"A Sustainable Approach for Producing Ti and TiS2 from TiC"
Metall. Mater. Trans. B, 52 (2020) 77-87. DOI: 10.1007/s11663-020-01988-5 .
324) R. O. Suzuki, Y. Yashima, N. Suzuki, E. Ahmadi, S. Natsui, T. Kikuchi,
"Titanium Production via Titanium Sulfide",
MATEC Web of Conferences 321, The 14th World Conference on Titanium (Ti 2019) (2020) 07003, DOI: 10.1051/matecconf/202032107003
323) Mana Iwai, Tatsuya Kikuchi, Ryosuke O. Suzuki,
"High-speed galvanostatic anodizing without oxide burning using a nanodimpled aluminum surface for nanoporous alumina fabrication",
Applied Surface Science, 537 (2021) 147852. DOI:10.1016/j.apsusc.2020.147852
322) Shungo Natsui, Kazui Tonya, Hiroshi Nogami, Tatsuya Kikuchi, Ryosuke O Suzuki,
"SPH Simulations of binary droplet deformation considering the Fowkes theory",
Chemical Engineering Science, 229 (2021) 116035. DOI:10.1016/j.ces.2020.116035
321) Eltefat Ahmadi, Ryosuke O. Suzuki, Tatsuya Kikuchi, Takumi Kaneko, Yuta Yashima
"Towards a Sustainable Technology for Production of Extra-Pure Ti Metal: Electrolysis of Sulfurized Ti(C,N) in Molten CaCl2"
International Journal of Minerals, Metallurgy and Materials (IJMMM), 27 (2020) 1635-1643. DOI: 10.1007/s12613-020-2162-5
320) Tatsuya Kikuchi, Yusuke Suzuki, Mana Iwai, and Ryosuke O. Suzuki,
"Anodizing Aluminum and Its Alloys in Etidronic Acid to Enhance Their Corrosion Resistance in a Sodium Chloride Solution",
Journal of The Electrochemical Society, 167 (2020) 121502. DOI: 10.1149/1945-7111/abaa6b
319) Ryota Shibuya, Shungo Natsui, Hiroshi Nogami, Tatsuya Kikuchi, Ryosuke O. Suzuki,
"Characterization of the cathodic thermal behavior of molten CaCl2 and its hygroscopic chloride mixture during electrolysis",
J. Electrochem. Soc., 167 (10) (2020) 102507. DOI: 10.1149/1945-7111/ab9961
318) 菊地竜也, 中島大希, 近藤竜之介, 鈴木亮輔, 夏井俊悟,
"陽極酸化によるアルミニウム表面のナノ構造制御と超親水性・超撥水性の発現"
機能材料、Vol.40 No.6 (2020) 24-30. 【特集】高撥水・高親水性材料の開発動向
317) Mana Iwai, Tatsuya Kikuchi, Ryosuke O. Suzuki,
"Initial Structural Changes of Porous Alumina Film via High-Resolution Microscopy Observations"
ECS Journal of Solid State Science and Technology, 9 (4) (2020) 044004. DOI: 10.1149/2162-8777/ab89ba
316) Tatsuya Kikuchi, Shunta Akiya, Kaito Kunimoto, Ryosuke O. Suzuki, Shungo Natsui,
"Photoluminescence from Anodic Aluminum Oxide Formed via Etidronic Acid Anodizing and Enhancing the Intensity"
Materials Transactions, 61 (6) (2020) 1130-1137 DOI: 10.2320/matertrans.MT-M2020010
315) 鈴木亮輔、坂口紀史、菊地竜也、夏井俊悟、
"CO2還元によるカーボンナノチューブの生成",
「脱石油に向けたCO2資源化技術＊化学的・生物的利用法を中心に＊《, 株式会社シーエムシー出版、東京、2020年7月31日発行
314) Takumi Kaneko, Yuta Yashima, Eltefat Ahmadi, Shungo Natsui, Ryosuke O. Suzuki,
"Synthesis of Sc sulfides by CS2 sulfurization",
Journal of Solid State Chemistry, 285 (2020) 121268. DOI: 10.1016/j.jssc.2020.121268 
.
313) Shungo Natsui, Akinori Sawada, Hiroshi Nogami, Tatsuya Kikuchi, Ryosuke O. Suzuki,
"Numerical simulation of coexisting solid-liquid slag trickle flow in a coke bed by the SPH method with a non-Newtonian fluid model",
ISIJ International, 60 (7) (2020)1445-1452. DOI: 10.2355/isijinternational.ISIJINT-2019-701
312) Shungo Natsui, Akinori Sawada, Hiroshi Nogami, Tatsuya Kikuchi, Ryosuke O. Suzuki,
"Topological consideration of 3-D local void structure for static holdup site in packed bed",
ISIJ International, 60 (7) (2020) 1453-1460. DOI: 10.2355/isijinternational.ISIJINT-2019-702
311) Shungo Natsui, Kazui Tonya, Hiroshi Nogami, Tatsuya Kikuchi, Ryosuke O. Suzuki, Ko-ichiro Ohno, Sohei Sukenaga, Tatsuya Kon, Shingo Ishihara, Shigeru Ueda
"Numerical Study of Binary Trickle Flow of Liquid Iron and Molten Slag in Coke Bed by Smoothed Particle Hydrodynamics",
Processes, 8 (2) (2020) 221. DOI: 10.3390/pr8020221 , https://www.mdpi.com/2227-9717/8/2/221
310) Ryosuke O. Suzuki, Shungo Natsui, Tatsuya Kikuchi,
"Chapter 12 - OS Process: Calciothermic reduction of TiO2 via CaO electrolysis in molten CaCl2"
in "Extractive Metallurgy of Titanium, Conventional and Recent Advances in Extraction and Production of Titanium Metal",
Editor(s): Zhigang Zak Fang, Francis H. Froes, Ying Zhang, Elsevier, (2020) pp.287-313. ISBN 9780128172001, DOI: 10.1016/B978-0-12-817200-1.00012-0 .
309) Tatsuya Kikuchi, Taiki Taniguchi, Ryosuke O Suzuki, Shungo Natsui,
"Fabrication of a Plasma Electrolytic Oxidation/Anodic Aluminum Oxide Multi-Layer Film via One-Step Anodizing Aluminum in Ammonium Carbonate"
Thin Solid Films, 697, (2020) 137799 DOI: 10.1016/j.tsf.2020.137799 .
308) Eltefat Ahmadi, Ryosuke O. Suzuki,
"An Innovative Process for Production of Ti Metal Powder via TiSx from TiN"
Metall. Mater. Trans. B, 51 [1] (2020) 140-148. DOI: 10.1007/s11663-019-01730-w .
307) 鈴木亮輔
"水冷式冷蔵庫における熱電発電",
日本熱電学会誌, 16, [3] (2020) 131-138. DOI: 10.50972/thermoelectrics.16.3_131 , On line
Thermoelectric Society of Japn gave us the best paper award 2021.
306) Shungo Natsui, Takuya Sudo, Ryota Shibuya, Hiroshi Nogami, Tatsuya Kikuchi, Ryosuke O. Suzuki,
"Visualization of TiO2 reduction behavior in molten salt electrolysis",
Metallurgical Materials Transactions B, 51 [1] (2020) 11-15. DOI: 10.1007/s11663-019-01733-7 video available
305) Daiki Nakajima, Tatsuya Kikuchi, Taiki Yoshioka, Hisayoshi Matsushima, Mikito Ueda, Ryosuke O. Suzuki, Shungo Natsui
"A Superhydrophilic Aluminum Surface with Fast Water Evaporation Based on Anodic Alumina Bundle Structures via Anodizing in Pyrophosphoric Acid",
Materials, 12 (2019) 3497 doi:10.3390/ma12213497 .
304) 原口 靖史, 澁谷 凌太, 夏井 俊悟, 菊地 竜也, 鈴木 亮輔
"TiO2溶融塩電解還元時のガス発生反応"
日本金属学会誌 83 [11] (2019), pp.441-448. DOI: 10.2320/jinstmet.JAW201901 FREE ACCESS
303) Mana Iwai, Tatsuya Kikuchi, Ryosuke O. Suzuki, Shungo Natsui
"Electrochemical and Morphological Characterization of Porous Alumina Formed by Galvanostatic Anodizing in Etidronic Acid"
Electrochimica Acta, 320, (2019) 134606 DOI: 10.1016/j.electacta.2019.134606
302) Yusuke Suzuki, Kai Kawahara, Tatsuya Kikuchi, Ryosuke O. Suzuki, Shungo Natsui
"Corrosion-Resistant Porous Alumina Formed via Anodizing Aluminum in Etidronic Acid and its Pore-Sealing Behavior in Boiling Water"
Journal of The Electrochemical Society, 166 (12) (2019) C261-C269. DOI:10.1149/2.0221912jes
301) Tatsuya Kikuchi, Kaito Kunimoto, Hiroshi Ikeda, Daiki Nakajima, Ryosuke O. Suzuki, Shungo Natsui
"Fabrication of anodic porous alumina via galvanostatic anodizing in alkaline sodium tetraborate solution and their morphology",
Journal of Electroanalytical Chemistry, 846 (2019) 113152. DOI: 10.1016/j.jelechem.2019.05.034
300) Takahiro Matsuzaki, Ryosuke O. Suzuki, Shungo Natsui, Tatsuya Kikuchi, Mikito Ueda
"Solubility of CaS in CaCl2-LiCl Eutectic Melt",
Materials Transactions, 60 [3] (2019) 411-415. DOI: 10.2320/matertrans.MA201809
299) Gudrun Savarsdottir, Geir Martin Haarberg, Ryosuke O. Suzuki
"Preface: Special Issue on Titanium Production by Molten Salt Electrochemical Process",
Materials Transaction, 60 [3] (2019) p.373. DOI: 10.2320/matertrans.MPR2019901
298) 夏井 俊悟, 梨元 涼太, 問谷 一偉, 澤田 旺成, 菊地 竜也, 鈴木 亮輔,
"総説 高温融体界面と分散相挙動の数値解析＊Smoothed Particle Hydrodynamics法の製錬プロセス解析への応用＊",
Journal of MMIJ, 135 [8](2019) pp.71-82. DOI:10.2473/journalofmmij.135.71
297) Shungo Natsui, Ryota Nashimoto, Tatsuya Kikuchi, and Ryosuke O. Suzuki,
"SPH Analysis of Interfacial Flow of the Two Immiscible Melts"
in: Advances in Molten Slags, Fluxes, and Salts: Proc. 10th Intern. Conf. Molten Slags, Fluxes and Salts (MOLTEN16)
Edited by: R.G. Reddy, P.Chaubal, P. C. Pistorius, and U. Pal, TMS (The Minerals, Metals & Materials Society), 2016
pp.589-596. DOI: 10.1007/978-3-319-48769-4_63
296) 菊地竜也、岩井愛、中島大希、夏井俊悟、鈴木亮輔
"アルミニウムのポーラス型アノード酸化皮膜",
表面技術、69,（2018）554-561.DOI: 10.4139/sfj.69.554
295) Daiki Nakajima, Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki
"Advancing and Receding Contact Angle Investigations for Highly Sticky and Slippery Aluminum Surfaces Fabricated by Nanostructured Anodic Oxide"
RSC Advances, 8 (2018), 37315-37323. DOI: 10.1039/c8ra07712f
294) Takahiro Matsuzaki, Ryosuke O. Suzuki, Shungo Natsui, Tatsuya Kikuchi, Mikito Ueda
"Solubility of CaS in Molten CaCl2",
Materials Transactions, 60 [3] (2019) 386-390. DOI: 10.2320/matertrans.MA201803
293) 鈴木亮輔, "報告 チタン新製錬の第6回国際円卓会議", チタン、66 [4] (2018) 250-251.
292) Ryosuke O. Suzuki, Hiromi Noguchi, Yasushi Haraguchi, Shungo Natsui, Tatsuya Kikuchi,
"Metal Production in CaCl2-based Melts",
ECS Transactions, 86 (14) (2018) 45-53. DOI: 10.1149/08614.0045ecst
291) Hiroki Ikeda, Mana Iwai, Daiki Nakajima, Tatsuya Kikuchi, Shungo Natsui, Norihito Sakaguchi, Ryosuke O. Suzuki,
"Nanostructural Characterization of Ordered Gold Particle Arrays Fabricated via Aluminum Anodizing, Sputter Coating, and Dewetting",
Applied Surface Science, 465 (2019) 747-753. DOI: 10.1016/j.apsusc.2018.09.229
290) Toshio Fujimura, Kunimasa Takeshita, Ryosuke O. Suzuki
"Mathematical Analysis of the Solidification Behavior of Multi-Component Alloy Steel Based on the Heat- and Solute-Transfer Equations in the Liquid–Solid Zone",
International Journal of Heat and Mass Transfer, 130 (2019) 797-812. DOI:10.1016/j.ijheatmasstransfer.2018.09.093
289) Shungo Natsui, Akinori Sawada, Tatsuya Kikuchi and Ryosuke O. Suzuki,
"Holdup Characteristics of Melt in Coke Beds of Different Shapes",
ISIJ International, 58 [9] (2018) pp. 1742–1744 DOI: 10.2355/isijinternational.ISIJINT-2018-369
288) Shungo Natsui, Takuya Sudo, Takumi Kaneko, Kazui Tonya, Daiki Nakajima, Tatsuya Kikuchi, and Ryosuke O. Suzuki,
"Spontaneous colloidal metal network formation driven by molten salt electrolysis",
Scientific Reports, 8, Article number: 13114 (2018) DOI: 10.1038/s41598-018-31521-3
287) Shungo Natsui, Ryota Nashimoto, Daiki Nakajima, Tatsuya Kikuchi and Ryosuke O. Suzuki,
"Column and film lifetimes in bubble-induced two-liquid flow",
Physical Review E97 (6), (2018) 062802 DOI: 10.1103/PhysRevE.97.062802
286) Ryosuke O. Suzuki, Nobuyoshi Suzuki, Yuta Yashima, Shungo Natsui, Tatsuya Kikuchi,
"Calciothermic Reduction and Electrolysis of Sulfides in CaCl2 Melt",
Proceedings of the First Global Conference on Extractive Metallurgy (Extraction2018), ed. by B.R.Davis, M.S.Moats, S.Wang,
The Minerals, Metals & Materials Society 2018, Springer, Cham, Switzerland,
pp.763-771. ISSN 2367-1181 ISSN 2367-1696 (electronic), DOI: 10.1007/978-3-319-95022-8_60
285) Eltefat Ahmadi, Yuta Yashima, Ryosuke O.Suzuki, and Sheikh Abdul Rezan,
"Formation of Titanium Sulfide from Titanium Oxycarbonitride by CS2 Gas"
Metall. Mater. Trans. B, 49(4) (2018) 1808-21. DOI: 10.1007/s11663-018-1278-8
284) 夏井俊悟, 澤田旺成, 照井光輝, 柏原佑介, 菊地竜也, 鈴木亮輔,
"回転強度試験における時系列3D scanningと固気液三相の移動解析によるコークス変形が及ぼす充填層内流れ特性評価",
鉄と鋼、104 [7](2018) 347-357. DOI:10.2355/tetsutohagane.TETSU-2018-005
日本鉄鋼協会2018俵論文賞受賞！
283) Toshio Fujimura, Kunimasa Takeshita, Ryosuke O. Suzuki,
"Mathematical Analysis of the Solidification Behavior of Plain Steel Based on Solute- and Heat-Transfer Equations in the Liquid–Solid Zone",
Metall. Mater. Trans. B, 49(2) (2018) 644-657. DOI: 10.1007/s11663-017-1149-8
282) Hiromi Noguchi, Shungo Natsui, Tatsuya Kikuchi, Ryosuke O. Suzuki,
"Reduction of CaTiO3 by Electrolysis in the Molten Salt CaCl2-CaO",(溶融塩CaCl2-CaO中の電解によるCaTiO3の還元)
Electrochemistry (電気化学および工業物理化学), 86(2) (2018) 82-87 DOI: 10.5796/electrochemistry.17-00078
281) Daiki Nakajima, Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki,
"Mirror-Finished Superhydrophobic Aluminum Surfaces Modified by Anodic Alumina Nanofibers and Self-Assembled Monolayers",
Applied Surface Science, 440 (2018) 506-513. DOI: 10.1016/j.apsusc.2018.01.182
280) 菊地竜也、中島大希、池田大樹、近藤竜之介、河原魁、國本海斗、岩井愛、鈴木雄介、秋谷俊太、竹永章正、西長 理、夏井俊悟、鈴木亮輔
"表面ナノ構造に基づく新規機能性アルミニウム材料の開発",
軽金属, 第68巻4号（2018）211-218. DOI:10.2464/jilm.68.211 .
279) Baiyi Lu, Xiangning Meng, Miaoyong Zhu, Ryosuke O. Suzuki,
"Thermoelectric System Absorbing Waste Heat from a Steel Ladle",
J. Electr. Mater., 47 (6) (2018) 3238–3247. DOI: 10.1007/s11664-018-6073-4
278) Sae Oki, Shungo Natsui, Ryosuke O. Suzuki,
"Performance Analysis of Thermoelectric Modules Consisting of Square Truncated Pyramid Elements Under Constant Heat Flux",
J. Electr. Mater., 47 (6) (2018) 3288-3297. DOI: 10.1007/s11664-017-6055-y
277) Shungo Natsui, Ko-ichiro Ohno, Sohei Sukenaga, Tatsuya Kikuchi and Ryosuke O. Suzuki
"Detailed Modeling of Melt Dripping in Coke Bed by DEM – SPH"
ISIJ Intern., 58 (2) (2018) 282-291. DOI: 10.2355/isijinternational.ISIJINT-2017-496
276) Kai Kawahara, Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki
"Fabrication of ordered submicrometer-scale convex lens array via nano imprint lithography using an anodized aluminum mold"
Microelectronic Engineering, 185-186 (2018) 61-68. DOI: 10.1016/j.mee.2017.10.016
275) Ryosuke O. Suzuki, Fumiya Matsuura, Shungo Natsui and Tatsuya Kikuchi,
"Conversion of CO2 to CO gas using molten CaCl2 and ZrO2 anode",
Proceedings of 1st International Conference on Energy and Material Efficiency and CO2 Reduction in the Steel Industry, (EMECR2017),
(The Iron and Steel Institute of Japan, ISIJ, 11-13 Oct 2017, Kobe International Conference Center, Kobe, Japan) pp.360-363. .
274) Shungo Natsui, Akinori Sawada, Tatsuya Kikuchi, and Ryosuke O. Suzuki,
"A direct numerical simulation of trickle flow in cokes bed",
Proceedings of 1st International Conference on Energy and Material Efficiency and CO2 Reduction in the Steel Industry, (EMECR2017),
(The Iron and Steel Institute of Japan, ISIJ, 11-13 Oct 2017, Kobe International Conference Center, Kobe, Japan) pp.480-482.
273) Shungo Natsui, Akinori Sawada, Koki Terui, Yusuke Kashihara, Tatsuya Kikuchi, and Ryosuke O. Suzuki,
“DEM-SPH Study of Molten Slag Trickle Flow in Coke Bed”,
Chemical Engineering Science, 175, (2018) pp.25–39. DOI: 10.1016/j.ces.2017.09.031 .
272) Tatsuya Kikuchi, Akimasa Takenaga, Shungo Natsui, Ryosuke O. Suzuki
"Advanced Hard Anodic Alumina Coatings via Etidronic Acid Anodizing",
Surface and Coatings Technology, 326, (2017) pp.72-78. DOI: 10.1016/j.surfcoat.2017.07.043 .
271) Ryunosuke Kondo, Daiki Nakajima, Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki
"Superhydrophilic and superhydrophobic aluminum alloys fabricated via pyrophosphoric acid anodizing and fluorinated SAM modification",
Journal of Alloys and Compounds, 725 (2017) pp.379-387. DOI: 10.1016/j.jallcom.2017.07.183
270) Baiyi Lu, Xiangning Meng, Yue Tian, Miaoyong Zhu, Ryosuke O. Suzuki,
"Thermoelectric performance using counter-flowing thermal fluids",
Intern. J. of Hydrogen Energy, 42 (2017) pp.20835-20842. DOI: 10.1016/j.ijhydene.2017.06.132
269) Ryosuke O. Suzuki, Erika Takahashi, Mika Kitamura, Yuta Yashima, Hiromi Noguchi, Shungo Natsui and Tatsuya Kikuchi,
"Titanium Fabrication via CaCl2 from FeTiO3"
Proc. of the 6th Asian Conference on Molten Salts Chemistry and Technology, (June 13-16, 2017, Gyeongju, Korea)
OA11_Ryosuke O. Suzuki_Hokkaido University.doc
268) Shungo Natsui, Takuya Sudo, Tatsuya Kikuchi, Ryosuke O. Suzuki,
"Morphology of lithium droplets electrolytically deposited in LiCl-KCl-Li2O melt",
Electrochemistry Communications, 81(2017), pp.43-47. DOI: 10.1016/j.elecom.2017.06.001
267) Nobuyoshi Suzuki, Ryosuke O. Suzuki, Shungo Natsui, Tatsuya Kikuchi,
"Branched morphology of Nb powder particles fabricated by calciothermic reduction in CaCl2 melt",
Journal of Physics and Chemistry of Solids, 110 (2017) pp.58-63. DOI: 10.1016/j.jpcs.2017.05.032
266) Tatsuya Kikuchi, Jun Kawashima, Shungo Natsui, Ryosuke O. Suzuki,
"Fabrication of Porous Tungsten Oxide via Anodizing in an Ammonium Nitrate / Ethylene Glycol / Water Mixture for Visible Light-Driven Photocatalyst",
Applied Surface Science, 422 (2017) 130-137. DOI: 10.1016/j.apsusc.2017.05.256
265) Xiangning Meng, Baiyi Lu, Miaoyong Zhu, Ryosuke O. Suzuki
"Thermoelectric Generation Using Counter-Flows of Ideal Fluids",
Journal of Electronic Materials, 46(8) (2017) 5136-5144. DOI: 10.1007/s11664-017-5518-5 ,
264) Katsutoshi Ono, Toru H. Okabe, and Ryosuke O. Suzuki,
"Design, Test and Theoretical Assessments for Reduction of Titanium Oxide to Produce Titanium in Molten Salt"
Materials Transaction, 58 [3] (2017) pp.313-318. DOI: 10.2320/matertrans.MK201604
263) Ryosuke O. Suzuki
"Preface: Special Issue on New Proposals on Titanium Production and Molten Salts",
Materials Transaction, 58 [3] (2017) p.305. DOI: 10.2320/matertrans.MPR2017901
262) Shungo Natsui, Ryota Nashimoto, Daiki Nakajima, Takehiko Kumagai, Tatsuya Kikuchi, and Ryosuke O. Suzuki,
"Observation of Interface Deformation in Sodium Polytungstate Solution–Silicone Oil System due to Single Rising Bubble"
ISIJ International, 57 (2) (2017) pp.394-396. DOI: 10.2355/isijinternational.ISIJINT-2016-521
261) Shunta Akiya, Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki
"Nanostructural Characterization of Large-Scale Porous Alumina Fabricated via Anodizing in Arsenic Acid Solution",
Applied Surface Science, 403 (2017) pp.652-661. DOI:10.1016/j.apsusc.2017.01.243
260) Shungo Natsui, Ryota Nashimoto, Takehiko Kumagai, Tatsuya Kikuchi, and Ryosuke O. Suzuki,
"An SPH Study of Molten Matte-Slag Dispersion",
Metallurgical and Materials Transactions B, 48B (3) (2017) pp.1792–1806. DOI:10.1007/s11663-017-0930-z
259) Takahiro Matsuzaki, Shungo Natsui, Tatsuya Kikuchi, and Ryosuke O. Suzuki,
"Electrolytic reduction of V3S4 in molten CaCl2",
Materials Transaction, 58 [3] (2017) pp.371-376. DOI: 10.2320/matertrans.M2016305
日本金属学会2017論文賞受賞！
258) Shungo Natsui, Ryota Nashimoto, Tatsuya Kikuchi, Ryosuke O. Suzuki, Hifumi Takai, Ko.ichiro Ohno, Sohei Sukenaga,
"Capturing the Non-spherical Shape of Granular Media and Its Trickle Flow Characteristics Using Fully-Lagrangian Method",
AIChE Journal, 63(6), (2017) pp.2257-2271, DOI: 10.1002/aic.15538.
257) 鈴木亮輔,
報告 "第５回溶融塩中でのチタン製錬国際円卓会議の報告(I)(II)(III)",
チタン、64 [4] (2016) pp.270-277 , 65 [1] (2017) pp.36-42 , 65 [2] (2017) pp.120-123 .
256) Nobuyoshi Suzuki, Mariko Tanaka, Hiromi Noguchi, Shungo Natsui, Tatsuya Kikuchi, and Ryosuke O. Suzuki,
"Calcium Reduction of TiS2 in CaCl2 Melt",
Materials Transaction, 58 [3] (2017) pp.367-370. DOI: 10.2320/matertrans.MK201613
255) Ryosuke O. Suzuki, Hiromi Noguchi, Hiromasa Hada, Shungo Natsui, Tatsuya Kikuchi,
"Reduction of CaTiO3 in Molten CaCl2 - as Basic Understanding of Electrolysis",
Materials Transaction, 58 [3] (2017) pp.341-349. DOI: 10.2320/matertrans.MK201625
254) 菊地竜也、中島大希、夏井俊悟、鈴木亮輔
"アノード酸化によるアルミナナノファイバーの作製と表面機能化"
表面技術、67巻10号 (2016) pp.527-532. DOI:10.4139/sfj.67.527
253) Sae Oki, Shungo Natsui, Ryosuke O. Suzuki,
"Performance simulation of flat plate thermoelectric module consisting of square truncated pyramid elements",
J. Electr. Mater., 46 [5] (2017) pp.2691-2696. DOI:10.1007/s11664-016-4905-7
252) Nobuyoshi Suzuki, M. Tanaka, H. Noguchi, S. Natsui, T. Kikuchi, Ryosuke O. Suzuki,
"Reduction of TiS2 By OS Process in CaCl2 Melt",
PRiME 2016/230th ECS Meeting (October 2-7, 2016), ECS Transactions, 75 [15] (2016) pp.507-515. DOI:10.1149/07515.0507ecst
251) Ryosuke O. Suzuki, Fumiya Matsuura, Shungo Natsui, and Tatsuya Kikuchi,
"CO Gas Production By CO2 Gas Decomposition in Molten Salt Electrolysis",
PRiME 2016/230th ECS Meeting (October 2-7, 2016), ECS Transactions, 75 [15] (2016) pp.533-542. DOI:10.1149/07515.0533ecst
250) Daiki Nakajima, Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki
"Superhydrophilicity of a nanofiber-covered aluminum surface fabricated via pyrophosphoric acid anodizing",
Applied Surface Science, 389 (2016) pp.173-180. DOI:10.1016/j.apsusc.2016.06.088
249) Ryunosuke Kondo, Tatsuya Kikuchi, Shungo Natsui, and Ryosuke O. Suzuki,
"Fabrication of Self-ordered Porous Alumina via Anodizing in Sulfate Solutions",
Materials Letters, 183, (2016) pp.285-289. DOI:10.1016/j.matlet.2016.07.109
248) Akimasa Takenaga, Tatsuya Kikuchi, Shungo Natsui, and Ryosuke O. Suzuki
"Exploration for the Self-ordering of Porous Alumina Fabricated via Anodizing in Etidronic Acid",
Electrochimica Acta, 211, (2016) pp.515-523. DOI:10.1016/j.electacta.2016.06.071
247) Sumito Ozawa, Hidetoshi Matsuno, Akio Fujibayashi, Takuya Uchiyama, Takafumi Wakamatsu, Norihito Sakaguchi, and Ryosuke O. Suzuki,
"Influence of gas injection pipe on CO2 decomposition by CaCl2-CaO molten salt and ZrO2 solid electrolysis",
ISIJ Intern. 56 [11] (2016) pp.2093-2099. DOI:10.2355/isijinternational.ISIJINT-2016-179
246) Xengning Meng, and Ryosuke O. Suzuki,
"Helical configuration for thermoelectric generation",
Applied Thermal Engineering, 99 (2016) pp.352-357. DOI:10.1016/j.applthermaleng.2016.01.061
245) Tristan Barbier, Emmanuel Combe, Ryoji Funahashi, Tomonori Takeuchi, Masataka Kubouchi, Yuzuru Miyazaki, Emmanuel Guilmeau, and Ryosuke O. Suzuki,
"Structural Investigation and Indium Substitution in the Thermoelectric Mn2.7Cr0.3Si4Al2-xInx Series",
J. Electr. Mater., 45 [3] (2016) pp.1992-1999. DOI:10.1007/s11664-016-4365-0
244) Shungo Natsui, Ryota Nashimoto, Hifumi Takai, Takehiko Kumagai, Tatsuya Kikuchi, and Ryosuke O. Suzuki,
"Temperature Dependence of Behavior of Interface between Molten Sn and LiCl-KCl Eutectic Melt Due to Rising Gas Bubble",
Metallurgical and Materials Transactions B, 47(3) (2016) pp.1532-1537. DOI:10.1007/s11663-016-0618-9
243) Shunta Akiya, Tatsuya Kikuchi, Shungo Natsui, Norihito Sakaguchi, and Ryosuke O. Suzuki
"Self-ordered Porous Alumina Fabricated via Phosphonic Acid Anodizing",
Electrochimica Acta, 190 (2016) pp.471-479. DOI:10.1016/j.electacta.2015.12.162
242) Shungo Natsui, Ryota Nashimoto, Hifumi Takai, Takehiko Kumagai, Tatsuya Kikuchi, Ryosuke O Suzuki,
"SPH Simulations of the Behavior of the Interface between Two Immiscible Liquid Stirred by the Movement of a Gas Bubble",
Chemical Engineering Science, 141 (2016) pp.342-355. DOI:10.1016/j.ces.2015.11.018
241) Ryosuke O. Suzuki, Keita O. Ito and Sae Oki,
"Analysis of the performance of thermoelectric module under concentrated radiation heat flux",
J. Electr. Mater., 45 [3] (2016) pp.1827-1835. DOI:10.1007/s11664-015-4237-z
240) 小澤 純仁, 松野 英寿, 藤林 晃夫, 内山 拓也, 若松 貴文, 坂口 紀史, 鈴木亮輔,
"溶融CaCl2-CaOとZrO2固体電解質を用いたCO2ガス分解に与えるガス導入管の影響",
鉄と鋼,第102巻 第4号 (2016) pp.217-223. DOI:10.2355/tetsutohagane.TETSU-2015-025
239) Sae Oki, Keita O. Ito, Shungo Natsui, Ryosuke O. Suzuki,
"Numerical Optimization of Trapezoidal Thermoelectric Elements for Double-Pipe-Shaped Module",
J. Electr. Mater., 45 [3] (2016) pp.1358-1364. DOI:10.1007/s11664-015-4034-8
238) 夏井俊悟, 菊地竜也, 鈴木亮輔, "Euler-Lagrange法による高炉モデル",
まてりあ(日本金属学会報),第54巻第9号 (2015) pp.432-435. DOI:10.2320/materia.54.432
237) 鈴木亮輔, "巻頭言 熱電発電を実用化するには", 日本熱電学会誌, 12(1) (Aug, 2015) p.1.
236) Shungo Natsui, Hifumi Takai, Ryota Nashimoto, Tatsuya Kikuchi, and Ryosuke O. Suzuki,
"Model Study of the Effect of Particles Structure on the Heat and Mass Transfer through the Packed Bed in Ironmaking Blast Furnace",
International Journal of Heat and Mass Transfer, 91 (2015) pp.1176-1186. DOI:10.1016/j.ijheatmasstransfer.2015.08.033
235) Daiki Nakajima, Tatsuya Kikuchi, Shungo Natsui, Norihito Sakaguchi, and Ryosuke O. Suzuki
"Fabrication of a novel aluminum surface covered by numerous high-aspect-ratio anodic alumina nanofibers"
Applied Surface Science, 356 (2015) pp.54-62. DOI:10.1016/j.apsusc.2015.08.030
234) Shunta Akiya, Tatsuya Kikuchi, Shungo Natsui, and Ryosuke O. Suzuki
"Optimum Exploration for the Self-Ordering of Anodic Porous Alumina Formed via Selenic Acid Anodizing"
Journal of the Electrochemical Society, 162 (10) (2015) pp.E244-E250. DOI:10.1149/2.0391510jes
233) Tatsuya Kikuchi, Ryoma Ishida, Shungo Natsui, Takehiko Kumagai, Isao Ogino, Norihito Sakaguchi, Mikito Ueda and Ryosuke O. Suzuki
"Carbon Nanotube Synthesis via the Calciothermic Reduction of Carbon Dioxide with Iron Additives"
ECS Solid State Letters, 4 (9) (2015) pp.M19-M22. DOI:10.1149/2.0031509ssl
232) Ryosuke O. Suzuki, Takuya Uchiyama, Takafumi Wakamatsu, Fumiya Matsuura,
Mika Kitamura, Koya Otake, Shungo Natsui, Norihito Sakaguchi, Tatsuya Kikuchi,
"CO2 Decomposition by ZrO2 Anode and Molten Salt Electrolysis in CaCl2-CaO or LiCl-Li2O,"
Proc. 10th Intern. Conf on Molten Salt Chemistry and Technology (MS10) and 5th Asian Conf. on Molten Salt Chem. and Tech.(AMS5),
10-14 June, 2015, Northeastern University, Shenyang, China, pp.218-223.
231) Ryosuke O. Suzuki,
"Oxide reduction using electrolysis in CaCl2-CaO or LiCl-Li2O melt,"
Proc. 10th Intern. Conf on Molten Salt Chemistry and Technology (MS10) and 5th Asian Conf. on Molten Salt Chem. and Tech.(AMS5),
10-14 June, 2015, Northeastern University, Shenyang, China, pp.1-4. (Plenary Lecture).
230) Xiang-ning Meng, Ryosuke O. Suzuki,
"Performance Analysis of Thermoelectric Modules Using Polyhedron Elements",
Materials Transactions, 56 (7) (2015) 1092-1095. DOI: 10.2320/matertrans.E-M2015808
229) Akimasa Takenaga, Tatsuya Kikuchi, Shungo Natsui, and Ryosuke O. Suzuki,
"Self-Ordered Aluminum Anodizing in Phosphonoacetic Acid and Its Structural Coloration",
ECS Solid State Letters, 4(8) (2015) pp.P55-P58. DOI:10.1149/2.0021508ssl
228) 菊地竜也, 中島大希, 西長 理, 夏井俊悟, 鈴木亮輔,
"アルミニウムのポーラス型アノード酸化皮膜とナノファブリケーション",
軽金属, 64 [10] (2014) pp.476-482. DOI:10.2464/jilm.64.476
227) Ryoji Funahashi, Yoko Matsumura, Tristan Barbier, Tomonari Takeuchi, Ryosuke O. Suzuki,
Shigeru Katsuyama, Atsushi Yamamoto, Hiroyuki Takazawa, Emmanuel Combe,
"Durability of silicide-based thermoelectric modules at high temperatures in air",
J. Electronic Materials, 44 (8) (2015) pp.2946-2952. DOI:10.1007/s11664-015-3784-7
226) Ryoji Funahashi, Chunlei Wan, Feng Dang, Hiroaki Anno, Ryosuke O. Suzuki, Takeyuki Fujisaka, Kunihito Koumoto,
"Advanced Materials for Clean Energy", Chapter 4.,
"Development of Thermoelectric Technology from Materials to Generators",
Edited by Qiang Xu Kyo Jo and Tetsuhiko Kobayashi,
CRC Press (2015) pp.83-142, Print ISBN: 978-1-4822-0578-7, eBook ISBN: 978-1-4822-0580-0, DOI:10.1201/b18287-5
225) Tatsuya Kikuchi, Osamu Nishinaga, Shungo Natsui, Ryosuke O. Suzuki
"Polymer nanoimprinting using an anodized aluminum mold for structural coloration"
Applied Surface Science, 341,(2015) pp.19-27. DOI:10.1016/j.apsusc.2015.03.007
224) Daiki Nakajima, Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki,
"Highly Ordered Anodic Alumina Nanofibers Fabricated via Two Distinct Anodizing Processes",
ECS Electrochem. Lett., 4(5) (2015) pp.H14-H17. DOI:10.1149/2.0021505eel
223) Fumiya Matsuura, Takafumi Wakamatsu, Shungo Natsui, Tatsuya Kikuchi, Ryosuke O. Suzuki
"CO Gas Production by Molten Salt Electrolysis from CO2 Gas",
ISIJ International, 55 (2) (2015) pp.404-408. DOI:10.2355/isijinternational.55.404
222) Shungo Natsui, Tatsuya Kikuchi, Ryosuke O. Suzuki,Tatsuya Kon, Shigeru Ueda, and Hiroshi Nogami,
"Characterization of Liquid Trickle Flow in Poor-wetting Packed Bed",
ISIJ International, 55 (6) (2015) pp.1259–1266. DOI:10.2355/isijinternational.55.1259
221) Tatsuya Kikuchi, Osamu Nishinaga, Shungo Natsui, Ryosuke O. Suzuki
"Fabrication of Self-Ordered Porous Alumina via Etidronic Acid Anodizing and Structural Color Generation from Submicrometer-Scale Dimple Array"
Electrochimica Acta, 156 (2015) pp.235-243. DOI:10.1016/j.electacta.2014.12.171
220) Tatsuya Kikuchi, Daiki Nakajima, Osamu Nishinaga, Shungo Natsui, Ryosuke O. Suzuki,
"Porous Aluminum Oxide Formed by Anodizing in Various Electrolyte Species",
Current Nanoscience (2015) 11(5) pp.560-571. DOI:10.2174/1573413711999150608144742
219) Masahiko Baba, Tatsuya Kikuchi, Ryosuke O. Suzuki
"Niobium Powder Synthesized by Calciothermic Reduction of Niobium Hydroxide for Use in Capacitors",
Journal of Physics and Chemistry of Solids, 78 (2015) pp.101-109. DOI:10.1016/j.jpcs.2014.11.014 KURENAI repository
218) Tatsuya Kikuchi, Osamu Nishinaga, Daiki Nakajima, Jun Kawashima, Shungo Natsui, Norihito Sakaguchi, Ryosuke O. Suzuki,
"Ultra-High Density Single Nanometer-Scale Anodic Alumina Nanofibers Fabricated by Pyrophosphoric Acid Anodizing",
Scientific Reports, 4, No.7411,(2014) p.1-6. DOI:10.1038/srep07411
217) Takafumi Wakamatsu, Takuya Uchiyama, Shungo Natsui, Tatsuya Kikuchi and Ryosuke O. Suzuki,
"Solubilitiy of Gaseous Carbon Dioxide in Molten LiCl-Li2O",
Fluid Phase Equilibria, 385 (2015) 48-53. DOI:10.1016/j.fluid.2014.10.046
216) Xiangning Meng and Ryosuke O. Suzuki,
"Simulation Analysis of Tilted Polyhedron-Shaped Thermoelectric Elements",
J. Electr. Mater., 44 [6](2015) 1469-1476. DOI:10.1007/s11664-014-3418-5
215) Daiki Nakajima, Tatsuya Kikuchi, Shungo Natsui, and Ryosuke O. Suzuki
"Growth behavior of anodic oxide formed by aluminum anodizing in glutaric and its derivative acid electrolytes",
Applied Surface Science, 321 (2014) 364-370. DOI:10.1016/j.apsusc.2014.10.014
214) Shungo Natsui, Hifumi Takai, Takehiko Kumagai, Tatsuya Kikuchi, Ryosuke O. Suzuki,
"Multiphase Particle Simulation of Gas Bubble Passing through Liquid/Liquid Interfaces",
Materials Transactions, 55 (11)(2014) pp.1707-1715. Mater Trans Online DOI:10.2320/matertrans.M2014245
日本金属学会 2014年論文賞を受賞
213) Ryosuke O. Suzuki, Takeyuki Fujisaka, Keita O. Ito, Xiangning Meng and Hong-Tao Sui
"Dimensional Analysis of Thermoelectric Modules under a Constant Heat Flux",
J. Electr. Mater., 44 (1) (2015) 348-355. DOI:10.1007/s11664-014-3314-z
212) Shungo Natsui, Tatsuya Kikuchi, and Ryosuke O. Suzuki,
“Numerical Analysis of Carbon Monoxide-Hydrogen Gas Reduction of Iron Ore in a Packed Bed by an Euler-Lagrange Approach”,
Metallurgical and Materials Transactions B, 45 (6) (2014) 2395-2413. DOI:10.1007/s11663-014-0132-x
211) Tatsuya Kikuchi, Osamu Nishinaga, Shungo Natsui, and Ryosuke O. Suzuki,
"Self-Ordering Behavior of Anodic Porous Alumina via Selenic Acid Anodizing",
Electrochimica Acta, 137 (2014) 728-735. DOI:10.1016/j.electacta.2014.06.078
210) Ryosuke O. Suzuki, Daisuke Yamada, Shogo Osaki, Reyna F. Descallar-Arriesgado, and Tatsuya Kikuchi,
"Ionic Conduction of Oxygen and Calciothermic Reduction in Molten CaO-CaCl2",
in "Molten Salts Chemistry and Technology", ed. by Marcelle Gaune-Escard, Geir Martin Haarberg,
John Wiley & Sons, Chichester, West Sussex, UK, ISBN: 978-1-118-44873-1 (2014) pp.115-122.
Molten Salts Chemistry and Technology DOI:10.1002/9781118448847.ch2a
209) Tatsuya Kikuchi, Daiki Nakajima, Jun Kawashima, Shungo Natsui, and Ryosuke O. Suzuki,
"Fabrication of anodic porous alumina via anodizing in cyclic oxocarbon acids",
Applied Surface Science, 313 (2014) 276-285. DOI:10.1016/j.apsusc.2014.05.204
208) Keita O. Ito, Hongtao Sui, Hidetoshi Hakozaki, Hiroshi Kinoshita and Ryosuke O. Suzuki,
"Using a Water Lens for Light Concentration in Thermoelectric Generation",
J. Electr. Mater., 43 [6] (2014) 2086-2093. DOI:10.1007/s11664-013-2965-5
207) Ryoji Funahashi, Yoko Matsumura, Tomonari Takeuchi, Hideaki Tanaka, Wataru Norimatsu,
Emmanuel Combe, Ryosuke O. Suzuki, Chunlei Wan, Yifeng Wang, Michiko Kusunoki and Kunihito Koumoto,
"New n-type Silicide Thermoelectric Material with High Oxidation Resistance",
Mater. Res. Soc. Symp. Proc. 1490 [1] (2013) 103-112.
- Symposium B - Thermoelectric Materials Research and Device Development for Power Conversion
and Refrigeration. DOI:10.1557/opl.2013.117
206) Tatsuya Kikuchi, Osamu Nishinaga, Shungo Natsui, Ryosuke O. Suzuki,
"Fabrication of Anodic Nanoporous Alumina via Acetylenedicarboxylic Acid Anodizing"
ECS Electrochemistry Letters,3 [7] (2014) C25-C28. DOI:10.1149/2.0071407eel
205) Tatsuya Kikuchi, Masumi Yoshida, Shiki Matsuura, Shungo Natsui, Etsuji Tsuji, Hiroki Habazaki, Ryosuke O. Suzuki
"Rapid reduction of titanium dioxide nano-particles by reduction with a calcium reductant"
Journal of Physics and Chemistry of Solids, 75 [9] (2014) 1041-1048. DOI:10.1016/j.jpcs.2014.04.016
204) Xiangning Meng, Takeyuki Fujisaka, Keita O. Ito, and Ryosuke O. Suzuki,
"Simulation of a thermoelectric module having parallelogram elements"
Materials Transaction, 55 (8) (2014) 1219-1225. Mater Trans Online DOI:10.2320/matertrans.E-M2014822
203) Keita O. Ito, Hongtao Sui, Hidetoshi Hakozaki, Hiroshi Kinoshita and Ryosuke O. Suzuki,
"Light-Concentration Characteristic of Water Lens and its Application to Thermoelectric Generation"
Key Engineering Materials, 617 (2014) 247-250. DOI:10.4028/www.scientific.net/KEM.617.247
202) Ryosuke O. Suzuki and Takeyuki Fujisaka,
"Optimization of Module Shape in Thermoelectric Power Generation"
Key Engineering Materials, 617 (2014) 251-255. DOI:10.4028/www.scientific.net/KEM.617.251
201) Xiangning Meng, Takeyuki Fujisaka, Keita O. Ito, and Ryosuke O. Suzuki,
"Thermoelectric Analysis for a Three-Dimensional Power Generator in Helical"
Key Engineering Materials, 617 (2014) 260-264. DOI:10.4028/www.scientific.net/KEM.617.260
200) Xiangning Meng, Takeyuki Fujisaka, Keita O. Ito and Ryosuke O. Suzuki
"Thermoelectric Analysis for Pai-type Thermoelectric Module with Tilted Elements"
Materials Research Innovations, 18, Suppl.4 (2014) S4-116-121. DOI:10.1179/1432891714Z.000000000654
199) Shungo Natsui, Hifumi Takai, Takehiko Kumagai, Tatsuya Kikuchi, and Ryosuke O Suzuki,
"Stable Mesh-free Moving Particle Semi-implicit Method for Direct Analysis of Gas-Liquid Two-Phase Flow",
Chemical Engineering Science, Vol. 111, (2014) 286-298. DOI:10.1016/j.ces.2014.02.038
198) Tatsuya Kikuchi, Tsuyoshi Yamamoto, Shungo Natsui, and Ryosuke O. Suzuki
"Fabrication of Anodic Porous Alumina by Squaric Acid Anodizing",
Electrochimica Acta, 123 (2014) 14-22. DOI:10.1016/j.electacta.2013.12.186
197) Xiangning Meng, Takeyuki Fujisaka and Ryosuke O. Suzuki
"Thermoelectric Analysis for Helical Power Generation Systems"
J. Electron. Mater., 43 [6] (2014) 1509-1520. DOI:10.1007/s11664-013-2768-8
196) Tatsuya Kikuchi, Masumi Yoshida, Yoshiaki Taguchi, Hiroki Habazaki and Ryosuke O. Suzuki,
"Fabrication of a Macro-Prorous Ti-Zr Alloy by Electroless Reduction with a Calcium Reductant for Electrolytic Capacitor Applications,"
J. Alloys and Compounds, 586 (2014) 148-154. DOI:10.1016/j.jallcom.2013.10.052
195) Osamu Nishinaga, Tatsuya Kikuchi, Shungo Natsui, and Ryosuke O. Suzuki
"Rapid fabrication of self-ordered porous alumina with 10-/sub-10-nm-scale
nanostructures by selenic acid anodizing",
Scientific Reports, 3, (2013) Article No.2748. DOI:10.1038/srep02748
194) Tatsuya Kikuchi, Tsuyoshi Yamamoto, Ryosuke O. Suzuki
"Growth behavior of anodic porous alumina formed in malic acid solution",
Applied Surface Science, 284 (2013) 907-913.
193) Tatsuya Kikuchi, Yuhta Wachi, Masatoshi Sakairi, and Ryosuke O. Suzuki
"Aluminum Bulk Micromachining through an Anodic Oxide Mask by
Electrochemical Etching in an Acetic Acid / Perchloric Acid Solution"
Microelectronic Engineering, 111 (2013) 14-20.
192) Xiang-ning Meng, Wei-ling Wang, Miao-yong Zhu, Ryosuke O. Suzuki,
"Deformation simulation of copper plates of slab continuos casting mold",
Proc. 4th International Symposium on High-Temperature Metallurgical Processing,
Edited by: Tao Jiang, Jiann-YangHwang, Phillip J. Mackey, Onuralp Yucel, and Guifeng Zhou,
TMS (The Minerals, Metals & Materials Society), (2013) 411-416.
191) Tatsuya Kikuchi, Yuhta Wachi, Taka-aki Takahashi, Masatoshi Sakairi, and Ryosuke O. Suzuki
"Fabrication of a Meniscus Microlens Array Made of Anodic Alumina by Laser Irradiation and Electrochemical Techniques"
Electrochimica Acta, 94 (2013) 269-276.
190) Koya Otake, Hiroshi Kinoshita, Tatsuya Kikuchi, and Ryosuke O. Suzuki
"CO2 Gas Decomposition to Carbon by Electro-reduction in Molten Salts",
Electrochimica Acta, 100 (2013) 293-299.
189) Ryosuke O. Suzuki, Atsushi Nakagawa, Hongtao Sui, and Takeyuki Fujisaka
"Thermoelectric Generation Using Water Lenses",
J. Electron. Mater., 42 (7) (2013) 1960-1965.
188) Takeyuki Fujisaka Hongtao Sui, and Ryosuke O. Suzuki,
"Design and Numerical Evaluation of Cascade-Type Thermoelectric Modules",
J. Electron. Mater., 42 (7) (2013) 1688-1696.
187) Isamu Ueda, Masahiko Baba, Tatsuya Kikuchi, and Ryosuke O. Suzuki,
"Formation of Niobium Powder by Electrolysis in Molten Salt",
Electrochimica Acta, 100 (2013) 269-274.
186) R. Funahashi, Y. Matsumura, H. Tanaka, T. Takeuchi, W. Norimatsu, E. Combe,
R. O. Suzuki, Y. Wang, C. Wan, S. Katsuyama, M. Kusunoki, K. Koumoto,
"Thermoelectric properties of n-type Mn3-xCrxSi4Al2 in air"
J. of Applied Phys. Vol. 112, No. 7, (2012) 073713.
185) Ryunosuke Enmei, Tatsuya Kikuchi and Ryosuke O. Suzuki,
"Production of Nb-Ti-Ni alloy in molten CaCl2",
Electrochimica Acta, 100 (2013) 257-260.
184) Ryosuke O. Suzuki, Yuto Sasaki, Takeyuki Fujisaka and Min Chen,
"Power generation using the fluids blown perpendicular to the TE panel",
IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.
25-28 Oct., 2012, Ecole de Technologie Superieure de Montreal, Universite du Quebec, Montreal, Canada,
The Institute of Electrical and Electronics Engineers (IEEE),
445 Hoes Lane, Piscataway, NJ 08854 USA, (2012) 5873-78.
183) Takeyuki Fujisaka and Ryosuke O. Suzuki
"Dimensional Optimization of Thermoelectric Modules for Solar Power Generation",
IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.
25-28 Oct., 2012, Ecole de Technologie Superieure de Montreal, Universite du Quebec, Montreal, Canada,
The Institute of Electrical and Electronics Engineers (IEEE),
445 Hoes Lane, Piscataway, NJ 08854 USA, (2012) 5868-72.
182) Ryosuke O. Suzuki and Takeyuki Fujisaka,
"Optimization of Design in Cascade-Type Thermoelectric Module",
Proc. Powder Metallurgy World Congress and Exhibition (PM2012 YOKOHAMA).
Sept.23-27, 2012, Pacifico Yokohama, Yokohama, Japan,
the Japan Society of Powder and Powder Metallurgy (JSPM), (2012) 16E-S1-17.
"0463_201211060004.pdf" in CDROM (ISBN:978-4-9900214-9-8).
181) Ryosuke O. Suzuki, Isamu Ueda, Tatsuya Sato, Masahiko Baba and Tatsuya Kikuchi,
"Reduction of Niobium Oxide Using CaCl2 Melt",
Proc. 4th Asian Conference on Molten Salt Chemistry and Technology.
Sept.23-27, 2012, Hotel Taikanso, Matsushima, Japan,
Molten Salt Committee, the Electrochemical Society of Japan. (2012) pp.29-35.
180) Ryosuke O. Suzuki, Koya Otake, Tetsuya Uchiyama, Hiroshi Kinoshita, Norihito Sakaguchi, Tatsuya Kikuchi,
"Decomposition of CO2 Gas in CaCl2-CaO and LiCl-Li2O Molten Salts",
ECS Transactions, 50 (11) (2012) 443-450.
179) Ryosuke O. Suzuki, Naoto Kobayashi, Kei-ichi Kobayashi, Daisuke Yamada, Shogo Osaki,
Reyna Famila Descaller-Arriesgado, and Tatsuya Kikuchi,
"Electrolysis of CaO in the Molten CaCl2 for Direct Reduction of TiO2",
Proc. 12th World Conf. on Titanium, June 19-24, 2011, China National Convention Center, Beijing, China
ed by Lian Zhou, Hui Chang, Yafeng Lu and Dongsheng Xu,
Science Press, Beijing, China, (2011) vol.I, pp.116-120.
178) Naoto Kobayashi, Kei-ichi Kobayashi, Tatsuya Kikuchi and Ryosuke O. Suzuki,
"Reduction of Titanium Oxides in Molten CaO-CaCl2"
Proc. 12th World Conf. on Titanium, June 19-24, 2011, China National Convention Center, Beijing, China
ed by Lian Zhou, Hui Chang, Yafeng Lu and Dongsheng Xu,
Science Press, Beijing, China, (2011) vol.I, pp.84-86.
177) Koya Otake, Hiroshi Kinoshita, Tatsuya Kikuchi, Ryosuke O. Suzuki
"CO2 Decomposition Using Electrochemical Process in Molten Salts",
Journal of Physics: Conference Series, 379 (1) (2012) 012038.
176) Ryosuke O. Suzuki, Yuto Sasaki, Takeyuki Fujisaka and Min Chen
"Effects of Fluid Directions on Heat Exchange in Thermoelectric Generators",
J. Electron. Mater., 41 (6) (2012) 1766-1770.
175) Reyna Famila Descallar-Arriesgado, Naoto Kobayashi, Tatsuya Kikuchi and R.O.Suzuki
"Calciothermic reduction of NiO by molten salt electrolysis of CaO in CaCl2 melt"
Electrochemica Acta, 56 (24) (2011), pp.8422-8429.
174) J.Zhu, J.Gao, M.Chen, J.Zhang, Q.Du, L.A.Rosendahl and R.O.Suzuki
"Experimental Study of a Thermoelectric Generation System",
J. Electron. Mater., 40, No.5 (2011) pp.744-752.
173) Yoshiaki Kashiwaya, Yasuaki Kusada, R.O. Suzuki
"Effect of Sulfur on the TTT Diagram of CaO-Al2O3 Slag at Eutectic Composition",
ISIJ international, Vol.51, No.12 (2011) pp.1974-1981.
172) Y. Kashiwaya, Y. Kusada, R.O. Suzuki
"Atmosphere Controlled Hot Thermocouple Method and Crystallization Phenomenon of CaO-Al2O3 Eutectic Slag",
ISIJ international, (2011) No.12 (2011) pp.1967-1973.
171) M. Chen, Y. Sasaki and R.O. Suzuki,
"Computational Simulation of Thermoelectric Generators in Marine Power Plants",
Materials Transactions, 52, No.8 (2011) pp.1549-1552. 日本熱電学会 論文賞を受賞
170) S. Osaki, H. Sakai and R.O. Suzuki,
"Direct Production of Ti-29Nb-13Ta-4.6Zr Biomedical Alloy from Oxide Mixture in Molten CaCl2",
J. Electrochemical Society, 157, No.8 (2010) pp.E117-E121.
169) R.O.Suzuki
"Multi-Layered Thermoelectric Power Generator",
Proceedings of CIMTEC 2010 - 5th Forum on New Materials, PART C, ed. by Pietro VINCENZINI, Kunihito KOUMOTO, Nicola ROMEO and Mark MEHOS
Advances in Science and Technology, Vol. 74 (2010) pp 1-8.
168) R.O.Suzuki
"Current Activities of OS Process Using Molten CaO+CaCl2",
Proceedings of 2nd International Round Table on Titanium Production in Molten Salts,
Tromso-Trondheim, Norway, 19-22 September 2010, "Suzuki-paper.pdf". Proc. available as pdf file.
167) 鈴木亮輔
"溶融塩化カルシウム中でのCaO電解を利用した酸化物の還元",
溶融塩および高温化学, 53[1](2010) pp.5-11.
166) S. Osaki, H.Sakai and R.O.Suzuki
"Direct Production of Ti-29Nb-13Ta-4.6Zr Biomedical Alloy from Oxide Mixture in Molten CaCl2",
Proc.Processing and Fabrication of Advanced Materials XVIII, (Dec.12-14, 2009, Sendai, Japan)
Ed. by M.Niinomii, M.Morinaga, M.Nakai, N.Bhatnagar and T.S.Srivatsan,
176th Committee on Process Created Materials Function, Japan Society for the Promotion of Science, Japan,
Tohoku University, Sendai, Japan, vol.2, pp.815-824.
165) R.O.Suzuki
"Direct Metal Production from Oxides by Using Molten Salt Electrolysis of CaO in CaCl2",
Proc.Processing and Fabrication of Advanced Materials XVIII, (Dec.12-14, 2009, Sendai, Japan)
Ed. by M.Niinomii, M.Morinaga, M.Nakai, N.Bhatnagar and T.S.Srivatsan,
176th Committee on Process Created Materials Function, Japan Society for the Promotion of Science, Japan,
Tohoku University, Sendai, Japan, vol.2, pp.701-710.
164) K.Kobayashi, Y.Oka and R.O.Suzuki
Influence of Current Density to Direct Reduction of TiO2 in Molten CaCl2
Materials Transactions, Vol.50 [12] (2009) pp.2704-2708. Mater Trans Online
(Original English Translation of List No.152.)
163) R.O.Suzuki and H.Kozasa
"Thermoelectric Properties of Zr3Mn4Si6 and TiMnSi2",
Journal of Electronic Materials, 39, (9)(2010), 2017-2022.
162) R.O.Suzuki, Y. Oka, K. Kobayashi, H. Sakai,
"Calciothermic Reduction and Simultaneous Electrolysis of CaO in the Molten CaCl2",
Proc.Processing Materials for Properties III,
Ed. by B. Mishra, A. Fuwa, and P. Bhandhubanyong, ISBN:978-0-87339-727-8,
TMS (The Minerals, Metals & Materials Society, USA), 2009, 387-392.
161) 鈴木亮輔
"チタンの現製造方法と開発中の新製錬法",
新家光雄監修,「チタンの基礎・加工と最新応用技術《シーエムシー出版, 東京 (2009) pp.26-39.
160) K.Kobayashi, Y.Oka and R.O.Suzuki
"Current Density in OS Process for TiO2 Reduction",
Proc. 2008 Joint Symp. on Molten Salts (MS8), (Oct.19-23, 2008, Kobe, Japan)
Ed. by S.Deki, K.Ota, Y.Iwadate and M. Matsunaga,
The Electrochemical Society of Japan (Tokyo), 2008, 742-747.
159) R.O.Suzuki and T. Naito
"Calciothermic Reduction of TiCl4 Gas by Electrolysis in CaCl2 Melt",
Proc. 2008 Joint Symp. on Molten Salts (MS8), (Oct.19-23, 2008, Kobe, Japan)
Ed. by S.Deki, K.Ota, Y.Iwadate and M. Matsunaga,
The Electrochemical Society of Japan (Tokyo), 2008, 658-663.
158) Y.Oka and R.O.Suzuki
"Direct Reduction of Liquid V2O5 in Molten CaCl2",
Proc. 2008 Joint Symp. on Molten Salts (MS8), (Oct.19-23, 2008, Kobe, Japan)
Ed. by S.Deki, K.Ota, Y.Iwadate and M. Matsunaga,
The Electrochemical Society of Japan (Tokyo), 2008, 652-657.
157) H.Sakai, Y.Oka and R.O.Suzuki
"Synthesis of Ti-6Al-4V Alloy Powder by the Electrolysis of Molten CaCl2+CaO",
Proc. 2008 Joint Symp. on Molten Salts (MS8), (Oct.19-23, 2008, Kobe, Japan)
Ed. by S.Deki, K.Ota, Y.Iwadate and M. Matsunaga,
The Electrochemical Society of Japan (Tokyo), 2008, 354-359.
156) J. Hashizume, Y.Oka and R.O.Suzuki
"Solubility of CO2 Gas in the Molten CaO-CaCl2",
Proc. 2008 Joint Symp. on Molten Salts (MS8), (Oct.19-23, 2008, Kobe, Japan)
Ed. by S.Deki, K.Ota, Y.Iwadate and M. Matsunaga,
The Electrochemical Society of Japan (Tokyo), 2008, 128-133.
155) R.O.Suzuki and T. Naito
"Calciothermic Reduction of TiCl4 Gas during the Electrolysis of CaCl2 Melt",
ECS Transactions, 16 [49] (2009) pp.265-270.
154) Y. Oka, and R.O.Suzuki
"Direct Reduction of Liquid V2O5 in Molten CaCl2",
ECS Transactions, 16 [49] (2008) pp.255-264.
153) 酒井 博、岡 佑一、鈴木亮輔
(CaCl2+CaO)溶融塩電解によるTi-6Al-4V合金の還元合成
(Synthesis of Ti-6Al-4V Alloy by the Elctrolysis of Molten CaCl2+CaO)
日本金属学会誌, Vol.72 [12] (2008) pp.921-927. JIM
152) 小林圭一、岡 佑一、鈴木亮輔
CaCl2溶融塩中でのTiO2直接還元における電流密度の影響
(Influence of Current Density to Direct Reduction of TiO2 in Molten CaCl2)
日本金属学会誌, Vol.72 [12] (2008) pp.916-920. JIM
151) R. O. Suzuki
"Thermoelectric Power Generation Using Two Thermal Fluids"
Proc. 8th Australian Heat and Mass Transfer Conference (8AHMTC),
(26-29 July 2005, Curtin Univ. of Tech., Perth, Australia)
Ed. by T.T.Chandratilleke and R. Narayanaswamy, Begell House Inc. Publishers,
ISBN 1-56700-235-8 (2007) K04.pdf
150) 戸田信一、鈴木亮輔、吉川信二
"原子力安全設備の安全性向上への適用性検討",
梶川武信監修,「熱電変換技術ハンドブック《NTS, 東京 (2008) pp.571-578.
149) 鈴木亮輔、田中大輔
"流体を用いた発電システム設計",
梶川武信監修,「熱電変換技術ハンドブック《NTS, 東京 (2008) pp.579-586.
148) C. Lertsatitthanakorn, N. Khasee, S. Atthajariyakul, S. Soponronnarit,
A. Therdyothin, Ryosuke O. Suzuki
"Performance Analysis of a Double-pass Thermoelectric Solar Air Collector",
Solar Energy Materials & Solar Cells, 92 [9] (2008) pp.1105-1109.
147) Masatomo Yashima and R.O.Suzuki
"Electronic structure and magnetic properties of monoclinic beta-Cu2V2O7: A GGA+U study",
Physical Review B, 79, 1 (2009) pp.125201-1-125201-6.
146) R. O. Suzuki and H. Ishikawa
"Direct Reduction of Vanadium Oxide in Molten CaCl2",
Mineral Processing and Extractive Metallurgy (Trans. Inst. Min. Metall. C), 117 [2](2008) pp.108-112.
145) R.O.Suzuki
"Calciothermic Reduction and Simultaneous Electrolysis of CaO in the Molten CaCl2
- Some Modifications of OS Process"
Proc. of 1st Intern. Round Table on Titanium Production in Molten Salts",
Deutsches Zentrum fuer Luft- und Raumfahrt, Cologne, Germany,
2-4 Mar. (2008) pp.20-26.
144) R.O.Suzuki
"Titanium and Energy"
"Frontiers of Materials Science", Ohmsha, Tokyo (2007)
ISBN 975-4-274-90639-8, pp.193-216.
143) Y. Oka and R.O.Suzuki
"溶融塩化カルシウム浴を用いた酸化バナジウムの直接還元"
日本金属学会誌, Vol.72 [3] (2008) pp.181-187.
142) ------
141) K. Kanou and R.O.Suzuki
"Preparation of Hydrogen Storage Ti-V-Cr Alloy from the Oxide Mixture in CaCl2"
Proceedings of 11th World Conference on Titanium (Ti-2007), (Kyoto, Japan, June 3-7, 2007)
"Ti-2007 Science and Techology", ed. by M.Niinomi, S.Akiyama, M.Ikeda, M.Hagiwara and K.Maruyama,
日本金属学会 (JIM), pp.107-110. "2007_Vol_1_Pres_19.pdf" at Online ITA
also published in "Metallurgical Abstracts on Light Metals and Alloys" Vol.41. on Web by 軽金属奨学会
140) R.O.Suzuki
"Calciothermic Reduction of TiO2 with ZrO2 Anode in Molten CaCl2"
Proceedings of 11th World Conference on Titanium (Ti-2007), (Kyoto, Japan, June 3-7, 2007)
"Ti-2007 Science and Techology", ed. by M.Niinomi, S.Akiyama, M.Ikeda, M.Hagiwara and K.Maruyama,
日本金属学会 (JIM), pp.99-102. "2007_Vol_1_Pres_17.pdf" at Online ITA
also published in "Metallurgical Abstracts on Light Metals and Alloys" Vol.41. on Web by 軽金属奨学会
139) T, Naito, R.O.Suzuki and Y.Tomii
"Reduction of TiCl4 gas by Ca dissolved in the molten CaCl2"
Proceedings of 11th World Conference on Titanium (Ti-2007), (Kyoto, Japan, June 3-7, 2007)
"Ti-2007 Science and Technology", ed. by M.Niinomi, S.Akiyama, M.Ikeda, M.Hagiwara and K.Maruyama,
日本金属学会 (JIM), pp.103-106. "2007_Vol_1_Pres_18.pdf" at Online ITA
also published in "Metallurgical Abstracts on Light Metals and Alloys" Vol.41. on Web by 軽金属奨学会
138) 外島光太朗, 鈴木亮輔, 雨澤浩史, 冨井洋一
"(ZnxCu2-x)V2O7の熱電特性と相変態"
粉体及び粉末冶金, 54[5](2007) pp.356-361.
137) Kotaro Sotojima, R.O. Suzuki, K. Amezawa, Y. Tomii
"Thermoelectric Properties and Phase Transition of (ZnxCu2-x)V2O7"
Mater.Trans., 48[8](2007) pp.2094-2099. Mater Trans Online
136) R. O. Suzuki and H. Ishikawa
"Direct Reduction of Vanadium Oxide in Molten CaCl2",
ECS Transactions, Vol.3, No.35 (2007) pp.347-356.
Proc. 15th Intern. Symp. on Molten Salts, (Oct.29- Nov.3, 2006, Cancun, Mexico)
The Electrochemical Society, Penningston, NJ, USA.
135) R. O. Suzuki
"Direct Reduction Processes for Titanium Oxide in Molten Salt"
JOM: The Member J. Minerals, Metals. Mater. Soc., 59 [1](2007) pp.68-71. Abstract (pdf) at TMS
134) R. O. Suzuki and Hiroyuki Ishikawa
"Direct Reduction of Vanadium Oxide in Molten CaCl2",
Proc. Sohn International Symposium, "Advanced Processing of Metals and Materials, Vol.3,
Thermo and Physicochemical Principles: Special Materials and Aqueous and Electrochemical Processing",
Ed. by F. Kongoli and R.G. Reddy, TMS (The Minerals, Metals & Materials Society), 2006, pp. 597-607.
Proc. available
133) R. O. Suzuki and D. Tanaka
"Mathematical Simulation on Power Generation by Roll Cake Type of Thermoelectric Cylinders",
Proc. 25th Intern. Conf. on Thermoelectrics, (6-10 August 2006, Wien, Austria)
The Inst. Elect. Elect. Eng.(IEEE) (2006) pp.305-310.
Proc. available
132) 鈴木亮輔
"溶融塩化カルシウム中でのカルシウム還元",
溶融塩および高温化学, 49[1](2006) pp.27-32.
131) 山口 誠、山口雅憲、鈴木亮輔
"新製錬の最新動向 2005秋",
チタン, 54[1](2006) pp.78-82.
130) Tatsuya. Maruoka and Ryosuke O. Suzuki
"The Phase Equilibria and Seebeck Coefficient of (Co,M)3AlC (M=Fe or Ni)",
Mater.Trans, 47[6](2005) pp.1422-1427.
129) R. O. Suzuki and Y. Maki
"Dissolution Rate of CaO in Molten CaCl2",
Met.Mater.Trans, (2005) 投稿中.
128) 鈴木亮輔
"水素吸蔵合金の新製造法",
化学フロンティア17「新エネルギー開発最前線-化石燃料に替わる環境調和型エネルギーシステムの
構築を目指して《, 吉川暹編, 化学同人, 京都, ISBN4-7598-0747-0 (2006) pp.61-67.
127) R. O. Suzuki and K. Ohta
"Cromia Coating on Iron Using CrO3 in Ozone",
Oxidation of Metals, Vol.65, No.1/2,(2006) pp.39-52. .
126) R. O. Suzuki, M. Baba and K. Yamamoto
"Broccoli-like Powder of Ta and Nb by Ca Reduction of Their Oxides"
Proc. 7th Int. Symp. on Molten Salts Chem. & Techn.,
(29Aug.-02Sept. 2005, Toulouse, France), vol.2, pp.1063-66.
125) R. O. Suzuki, T. Ogawa and R. Kondo
"Synthesis of Higher Chromium Oxides Using Ozone Gas",
J.Amer.Ceram.Soc., 91 [4] (2008) pp.1148-1154.
124) R. O. Suzuki and H. Kitagawa
"Direct Synthesis of TiCr2 Powder by Calciothermic Co-reduction of their Oxides in Molten CaCl2",
Electrochemistry, 73 [8] (2005) pp.724-729
123) R. O. Suzuki, S-I.Toda, S.Yoshikawa and K.Tamayama
"Thermoelectric Power Generation Using Hot Fluid Flow of Sodium",
Proc. Joint Intern. Conf. on Sustainable Energy and Environment,
(1-3 Dec., 2004, Hua Hin, Tailand), vol.1 (2004), pp.63-66. pdf file at our HP.
122) R. O. Suzuki and Y. Matsuoka
"Preparation of Ti-Cr-V Hydrogen Absorption Alloy Powder",
Proc. Joint Intern. Conf. on Sustainable Energy and Environment,
(1-3 Dec., 2004, Hua Hin, Tailand), vol.1 (2004), pp.167-170. pdf file at our HP.
121) K. Yamamoto, R. O. Suzuki, Y. Ono and M. Baba
"Formation of Broccoli-like Morphology of Ta Powder",
Proc. 14th Intern. Symp. on Molten Salts, (October 3-8, 2004, Hawaii, USA)
The Electrochemical Society, Penningston, NJ, USA, (2006) pp.1052-1062.
ECS Proc. 2004-24 Proceedings of the 14th International Symposium on Molten Salts, 1052-1062. DOI: 10.1149/200424.1052PV
120) N. Asahara, M. Yoshida, Y. Matsuoka and R. O. Suzuki
"Ceramic Membrane in Direct Reduction of TiO2 in Molten CaCl2",
Proc. 14th Intern. Symp. on Molten Salts, (October 3-8, 2004, Hawaii, USA)
The Electrochemical Society, Penningston, NJ, USA, (2006) pp.1063-1070.
ECS Proc. 2004-24 Proceedings of the 14th International Symposium on Molten Salts, 1063-1070. DOI: 10.1149/200424.1063PV
119) R. O. Suzuki, K. Tatemoto and H. Kitagawa
"Preparation of Hydrogen Storage Alloys from the Oxides by Calcium Co-reduction in Molten CaCl2",
Proc. 14th Intern. Symp. on Molten Salts, (October 3-8, 2004, Hawaii, USA)
The Electrochemical Society, Penningston, NJ, USA, (2006) pp.1006-1016.
ECS Proc. 2004-24 Proceedings of the 14th International Symposium on Molten Salts, 1063-1070. DOI: 10.1149/200424.1006PV
118) 鈴木亮輔
"気体オゾンによる金属・半導体材料表面の高酸化状態形成"、
応用物理学会誌, 74[1](2005) pp.37-41.
117) M. Baba and R. O. Suzuki
"Dielectric Properties of Tantalum Powder with Broccoli-like Morphology"
J. Alloys and Comp., 392[1-2](2005) pp.225-230.
116) 鈴木亮輔
"世界におけるチタンの新製錬法"、
チタン, 52[4](2004) pp.281-287.
115) S-I.Toda, R. O. Suzuki, K.Kondo, S.Nakai, S.Yoshikawa and K.Tamayama
"Power Generation with Fe2VAl modules using Sodium Heat Source"
Proc. 23rd Intern. Conf. on Thermoelectrics,
(25-29 August 2004, Adelaide, Australia)
The Inst. Elect. Elect. Eng.(IEEE) (2004) #042, pp.1-4.
114) R. O. Suzuki, D. Tanaka and S-I.Toda
"Simulation of Thermoelectric Power Generation with Cylindrical Multi-Tubes"
Proc. 23rd Intern. Conf. on Thermoelectrics,
(25-29 August 2004, Adelaide, Australia)
The Inst. Elect. Elect. Eng.(IEEE) (2004) #006, pp.1-4.
113) R. O. Suzuki, M. Baba, Y. Ono and K. Yamamoto
"Formation of Broccoli-like Morphology of Tantalum Powder"
J. Alloys and Comp., 389[1-2](2005) pp.310-316.(Full Text)
112) R. O. Suzuki, K. Tatemoto and H. Kitagawa
"Direct Synthesis of the Hydrogen Storage V-Ti Alloy Powder from the Oxides
by Calcium Co-reduction"
J. Alloys and Comp., 385[1-2] (2004) pp.173-180.
111) A. Saguchi, K. Asabe, T. Fukuda, W. Takahashi, R. O. Suzuki
"Recycling of Rare Earth Magnet Scraps; Carbon and Oxygen Removal from Nd Magnet Scraps"
J. Alloys and Comp., 408-412, (2006), pp.1377-1381.
110) R. O. Suzuki and T. Kyono
"Thermoelectric Properties of Fe2TiAl Heusler Alloys"
J. Alloys and Comp., 377[1-2] (2004) pp.38-42.
109) R. O. Suzuki and S. Fukui
"Reduction of TiO2 in the Molten CaCl2 by Ca Deposited during CaO Electrolysis"
Mater. Trans., 45[5] (2004) pp.1665-1671. Mater Trans Online
108) R. O. Suzuki
"Mathematic Simulation on Power Generation by Roll Cake Type of Thermoelectric Double Cylinders"
J. Power Sources, 133[2] (2004) pp.277-285.
107) R. O. Suzuki, D. Tanaka and S-I.Toda
"Mathematical Simulation of Thermoelectric Power Generation with the Multi-Flat-Panels"
Proc. 22nd Intern. Conf. on Thermoelectrics,
(17-21 August 2003, La Grande-Motte, France)
The Inst. Elect. Elect. Eng.(IEEE) (2003) pp.550-553.
106) R. O. Suzuki and D. Tanaka
"Mathematic Simulation of Thermoelectric Power Generation by Roll Cake Type of Thermoelectric Tubes"
J. Power Sources, 132[1-2] (2004) pp.266-274.
105) R. O. Suzuki
"OS Process - Thermo-Electro-chemical Reduction of TiO2 in the Molten CaCl2"
"Ti-2003 Science and Technology", Proc. 10th World Conf. on Titanium,
(13-18 July 2003, Hamburg, Germany) Ed.by G.Luetjering and J.Albrecht, 2004,
Wiley-VCH (Weinheim, Germany) Vol.1, pp.245-252.
104) K. Tatemoto, Y. Ono and R. O. Suzuki
"Silicide Coating on Refractory Metals in Molten Salt"
J. Phys. Chem. Solids, Vol.66[2-4] (2005) pp.526-529.
103) M. Baba, Y. Ono and R. O. Suzuki
"Tantalum and Niobium Powder Preparation from Their Oxides by Calciothermic Reduction in the Molten CaCl2"
J. Phys. Chem. Solids, 66[2-4] (2005) pp.466-470.
102) R. O. Suzuki
"Calciothermic Reduction of TiO2 and in-situ Electrolysis of CaO in the Molten CaCl2"
J. Phys. Chem. Solids, 66[2-4] (2005) pp.461-465.
101) 鈴木亮輔、
"クロール法にかわるチタンの新製錬法の開発"、
金属, 73[5](2003), pp.413-416.
100) R. O. Suzuki and D. Tanaka
"Mathematic Simulation of Thermoelectric Power Generation with Cylindrical Multi-Tubes"
J. Power Sources, 124 [1] (2003) pp 293-298.
99) 鈴木亮輔
"鉄基ホイスラー合金の巨大熱電能の発見", (本文)
TECJ Newsletter, 7 (1)(2003) pp.5-6.
98) 鈴木亮輔
"酸化チタン原料の新製錬法に挑戦"、
"チタン揺籃期から成長期へ",
日本チタン協会, 東京, (2002) p.309.
97) R. O. Suzuki
"OS Process - Thermochemical Approach to Reduce Titanium Oxide in the molten CaCl2"
Invited Lecture, Proc. Yazawa Intern. Symp. on Metallurgical and Materials Processing:
Principles and Technologies, (2-6 March 2003, San Diego CA, USA)
"Aqueous and Electrochemical Processing", Vol.3,
ed. by F. Kongoli, K. Itagaki, C.Yamauchi and H.Y.Sohn,
The Minerals, Metals & Materials Society, Warrendale, PA, USA (2003) pp.187-199.
96) R. O. Suzuki and K. Ono
"OS Process - A New calciothermic reduction of TiO2 in the molten CaCl2"
Invited Lecture, Proc. 18th Annual Conf. & Exhibition. of Intern. Titanium Assoc.,
(6-8 Oct 2002, Orlando FL, USA)
The Intern. Titanium Assoc., Broomfield, CO, USA (2002) "Suzuki_Ono.pdf".
95) R. O. Suzuki and D. Tanaka
"Thermoelectric Power Generation with the multi-Panels"
J. Power Sources, 122 [2] (2003) pp.201-209.
94) R. O. Suzuki, K. Teranuma and K. Ono
"Calciothermic Reduction of Titanium Oxide and in-situ Electrolysis in Molten CaCl2"
Metall. Mater. Trans. B, 34B [3](2003) pp.287-295.
93) T. Kyono, R. O. Suzuki and K. Ono
"Conversion of Unused Heat Energy to Electricity by Means of
Thermoelectric Generation in Condenser"
IEEE Transactions on Energy Conversion, 18 [2] (2003) pp.330-334.
KURENAI repository
92) R. O. Suzuki and K. Ono
"A New Concept of Sponge Titanium Production by Calciothermic Reduction
of Titanium Oxide in the Molten CaCl2"
Proc. 13th Intern. Symp. on Molten Salt, (12-17 May 2002, Philadelphia, USA)
ed. by . C. Delong, R. W. Bradshaw, M. Matsunaga, G. R. Stafford, and P. C. Trulove,
The Electrochemical Society, Penningston, NJ, USA (2003) pp.810-821.
91) R. O. Suzuki and S. Inoue
"Calciothermic Reduction of Titanium Oxide in Molten CaCl2"
Metall. Mater. Trans. B, 34B [3] (2003) pp.277-285.
90) 鈴木亮輔、小野勝敏、
"開発中の酸化チタン原料の新製錬法について"、
チタン, 50[2](2002) pp.105-108.
89) 鈴木亮輔、
"ニオブの脱酸技術"、
金属, 72[3](2002) pp.227-231. 
88) K. Ono and R. O. Suzuki
"A New Concept of Sponge Titanium Production by Calciothermic Reduction
of Titanium Dioxide in Molten Calcium Chloride"
JOM: The Member J. Minerals, Metals. Mater. Soc., 54 [2](2002) pp.59-61.
87) 小野勝敏、鈴木亮輔
"還元性溶融塩による酸化チタンの直接還元"
まてりあ(日本金属学会会報), 41[1](2002) pp.28-31.
86) R. O. Suzuki, M. Ishikawa and K. Ono
"NbSi2 Coating on Niobium Using Molten Salt"
J. Alloys and Compounds, 336[1/2](2002) pp.280-285.
85) 鈴木亮輔
"材料合成プロセスへのオゾンの利用"
Ozonews in Japan, 40 (2001) pp.3-7.
84) R.O. Suzuki, A. Saguchi, W. Takahashi, T. Yagura and K. Ono
"Recycling of Rare Earth Magnet Scraps: Part II, Oxygen Removal by Calcium"
Mater. Trans., 42[12](2001) pp.2492-2498. Mater. Trans. Online
83) A. Saguchi, K. Asabe, W. Takahashi, R.O. Suzuki and K. Ono
"Recycling of Rare Earth Magnet Scraps: Part III, Carbon Removal under Vacuum Heating"
Mater. Trans., 43[2](2002) pp.256-260. Mater. Trans. Online
82) K. Asabe, A. Saguchi, W. Takahashi, R.O. Suzuki and K. Ono
"Recycling of Rare Earth Magnet Scraps: Part I, Carbon Removal by High Temperature Oxidation"
Mater. Trans., 42[12](2001) pp.2487-2491. Mater. Trans. Online
81) Y.Hanada, R. O. Suzuki and K. Ono
"Seebeck Coefficient of (Fe,V)3Al Alloys"
J.Alloys and Compounds, 329 (1-2)(2001) pp.63-68.
80) K. Ono and R. O. Suzuki
"A Process For Continuous Titanium Production From Titanium Oxide"
Proc. of Emerging Technology for Metals Production, (11-15 Feb. 2001,
New Orleans, USA), Ed. by P.R.Talor, (TMS, Ohio, USA) pp.79-88.
79) T. Nishiyama, R. Ishii, R. O. Suzuki, K. Takayama and K. Ono
"Needle-like Powder Preparation of Ta and Nb in the Molten Salt"
Proc. of 2000 Powder and Powder Metallurgy World Congress, (13-18 Nov. 2000,
Kyoto, Japan), Ed. by K.Kosuge and H.Nagai, pp.513-516.
78) T. Ohshima, R. O. Suzuki, T. Yagura and K. Ono
"Direct Powder Preparation of Nb-Ti Alloy from the Oxide Mixture"
Proc. of 2000 Powder and Powder Metallurgy World Congress, (13-18 Nov. 2000, Kyoto, Japan),
Ed. by K.Kosuge and H.Nagai, (Jpn. Soc Powder and Powder Metallurgy, Tokyo, Japan) pp.532-535.
77) R. O. Suzuki, T.N. Deura, M. Wakino, T. Matsunaga, R. Ishii and K. Ono
"Titanium Powder Preparation by Mg Reduction of Titanium Chlorides in the Moleten Salt" (Full Text),
Proc. of 6th Intern. Conf. on Molten Slags, Fluxes and Salts, (12-17 June 2000,
Stockholm, Sweden and Helsinki, Finland), ed. by S. Seetharaman and D. Sichen, paper 199.
76) R. O. Suzuki, M. Aizawa, T. Ohshima and K. Ono
"Ca-Deoxidation of Nb and Ti in Ca-Saturated CaCl2 Molten Salt" (Full Text),
Proc. of 6th Intern. Conf. on Molten Slags, Fluxes and Salts, (12-17 June 2000,
Stockholm, Sweden and Helsinki, Finland), ed. by S. Seetharaman and D. Sichen, paper 200.
75) R. O. Suzuki, T. Nishibata, Y. Nagaso, K. Nakanishi, M. Ishikawa, K. Teranuma and K. Ono
"Electroless Coating of Fe3Si on Steels in the Moleten Salt" (Full Text),
Proc. of 6th Intern. Conf. on Molten Slags, Fluxes and Salts, (12-17 June 2000,
Stockholm, Sweden and Helsinki, Finland), ed. by S. Seetharaman and D. Sichen, paper 180.
74) R. O. Suzuki and K. Ono
"Enhanced Evaporation of Copper by NH3 Gas Blowing"
Proc. of 10th International IUPAC Conf. on High Temperature Materials Chemistry (HTMC X),
(10-14 April 2000, Juelich, Germany), Ed. by K.Hilpert, F.W.Froben and L.Singheiser,
(Forschungszentrum Juelich, Germany), Vol.15, Part II, pp.491-494.
73) R. O. Suzuki, M. Ishikawa and K. Ono
"MoSi2 Coating on Molybdenum Using Molten Salt"
J. Alloys and Compounds, 306 [1/2](2000) pp.285-291.
72) R. O. Suzuki, Y. Nagaso, K. Nakanishi, M. Ishikawa and K. Ono
"Growth of Fe3Si Layer Deposited from the Molten Salt"
steel research, 71 (2000) pp.138-143.
71) R. O. Suzuki, T. Nishibata, K. Nakanishi, M. Ishikawa and K. Ono
"Electroless Coating of Fe3Si on Steel in the Molten Salt"
steel research, 71 (2000) pp.130-137.
70) R. O. Suzuki, T. N. Deura, R. Ishii, T. Matsunaga, T. N. Harada, M. Wakino and K. Ono
"Titanium Powder Preparation from TiCl4 in the Molten Salt"
Proc. of 2000 Powder and Powder Metallurgy World Congress, (13-18 Nov. 2000, Kyoto, Japan),
Ed. by K.Kosuge and H.Nagai, pp.401-404.
69) 辻 隆之、鈴木亮輔、小野勝敏
"Fe-Mn-Si合金およびMnまたはSi添加Fe3Si化合物の熱電能"
日本金属学会誌 63, [11] (1999) pp.1435-1442. 
68) R. O. Suzuki, M. Aizawa and K. Ono
"Calcium Deoxidation of Niobium and Titanium in Ca-saturated CaCl2 Molten Salt"
J. Alloys and Compounds, Vol.288 (1999) pp.173-182.
67) R. O. Suzuki, M. Aizawa and K. Ono
"Solid State Deoxidation of Niobium by Vacuum Deposited Titanium"
J. Alloys and Compounds, Vol.284, No.1-2, (1999) pp.222-227.
66) R. O. Suzuki, T. N. Harada, T. Matsunaga, T. N. Deura and K. Ono
"Titanium Powder Preparation by Magnesiothermic Reduction of Ti2+ in the Molten Salt"
Metall. Mater. Trans. B, 30B [6] (1999) pp.403-410.
65) K. Ono and R. O. Suzuki
"New Iron-Based Thermoelectric Junctions and Thermoelectric Generation Concept"
(Full text of preprint with all figures)
Proc. XVII International Conference of Thermoelectrics(ICT98),
The Inst. Elect. Elect. Eng.(IEEE) (1998) pp.515-518.
64) K. Ono and R. O. Suzuki
"Evaporation Process in Vacuum metallurgy"
J.Mass Spectrom. Soc. Jpn. 47[1] (1999) pp.38-41.
63) R. O. Suzuki, T. Ogawa and K. Ono
"Use Ozone to Prepare Silver Oxides"
J.Amer.Ceram.Soc., 82 [8] (1998) p.2033-38.
62) T. N. Deura, M. Wakino, T. Matsunaga, R. O. Suzuki and K. Ono
"Titanium Powder Production by TiCl4 Gas Injection
into Magnesium through Molten Salts"
Metall. Mater. Trans. B, 29B [12] (1998) pp.1167-74.
61) K. Ono, M. Kado and R. O. Suzuki
"Thermoelectric properties of the Fe-Al and Fe-Al-Si alloys
for thermoelectric generation utilizing low-temperature heat sources"
steel research, 69 [9/98] (1998) pp.387-390.
60) T. N. Deura, T. Matsunaga, R. O. Suzuki and K. Ono
"溶融塩中でのチタン塩化物の還元による粉末チタンの製造"
溶融塩および高温化学, 41 [1] (1998) pp.7-16.
59) Shengfeng Liu, R.O.Suzuki and K.Ono
"Solid State Deoxidation of Niobium by Calcium and Magnesium"
J. Alloys and Compounds, 266 No.1-2 (1998) pp.247-254.
58) 正田雅裕、門 昌輝、辻 隆之、鈴木亮輔、小野勝敏
"Fe-Al-Si合金のゼーベック効果及び低温熱源熱電変換特性"
鉄と鋼, 84 [2] (1998) pp.154-158.
57) R. O. Suzuki, J. Nagata, and D. Risold
"Experimental Phase Equilibria in the PbOx-CaO System"
J. Amer. Ceram. Soc., 81[9](1998) pp.2493-96.
56) D. Risold, J. Nagata, and R. O. Suzuki
"Thermodynamic description of the Pb-O System"
J. Phase Equilibria, 19 [3] (1998) pp.213-233.
55) 小野勝敏, 鈴木亮輔, 中橋良一, 正田雅裕
(K.Ono, R.O.Suzuki, R.Nakahashi and M.Shouda)
"低温用鉄系熱電変換素子"
("Iron-Based Element for Low Temperature Thermoelectric Generator")
鉄と鋼 83 [2] (1997) pp.157-161.
54) H.Nishiura, R.O.Suzuki, K.Ono and L.J.Gauckler
"Phase Diagram of the Ag-Cu2O-CuO Subsystem",
J. Amer. Ceram. Soc., 81 [8] (1998) 2181-87.
53) K.Ono and R.O.Suzuki
"Thermoelectric Power Generation: Converting Low-Grade Heat into Electricity"
Journal of Metals, Dec. (1998) pp.49-51.
52) R.O.Suzuki, T.Ogawa, D.Risold, L.J.Gauckler and K.Ono
"Experimental Phase Equilibria in the Sr-Ca-Cu-O System under the reduced oxygen atmosphere"
(Full text and All figures)
熱測定 24 [2] (1997) pp.61-68.
51) Y.H.Kim, R.O.Suzuki, H. Numakura, H.Wada and K.Ono
"Removal of Oxygen and Nitrogen from Niobium by External Gettering"
J. Alloys and Compounds, 248 (1997) pp.251-258.
50) 鈴木亮輔, 日谷知嗣, 竹村康司, 小野勝敏
"アンモニアガスによる鉄スクラップからの銅の除去"
金属, (1996) 8月号臨時増刊 pp.55-66.
49) 日谷知嗣, 竹村康司, 鈴木亮輔, 小野勝敏
"アンモニアガスによる溶銅の脱銅"
鉄と鋼, 82, [2] (1996) pp.135-140.
48) 須藤雄一郎, 竹下博之, 鈴木亮輔, 冨井洋一, 小野勝敏
"同位体比分離法によるTi-希薄Mo合金のSIMS定量分析"
日本金属学会誌, 60, [4] (1996) pp.406-411.
47) 竹下博之, 香川卓也, 鈴木亮輔, 大石敏雄, 小野勝敏
"SIMSによる高純度銅中の微量金属上純物の定量分析"
日本金属学会誌, 60, [3] (1996) pp.290-294.
46) 竹下博之, 冨井洋一, 鈴木亮輔, 小野勝敏
"二次イオン質量分析法(SIMS)によるチタン中微量酸素の局所定量分析"
日本金属学会誌, 59, [9] (1995) pp.973-977.
45) 公門 武, 鈴木亮輔, 小野勝敏
"溶融アルミニウム浸漬被覆-陽極酸化によるニオブの複合耐酸化処理"
日本金属学会誌 , 59, [9] (1995) pp.967-972.
44) K.Ono, E.Ichise, R.O.Suzuki, and T.Hidani
"Elimination of copper from the molten steel by NH3 blowing under reduced pressure"
Steel Research, 66, [9] (1995) pp.372-376. DOI: 10.1002/srin.199501140
43) Y.H.Kim, R.O.Suzuki, and K.Ono
"Preparation of High Purity Niobium by Electron Beam
Melting and External Gettering"
Proc. Conf. Electron Beam Melting & Refining - State of
the Art 1994, (Reno, USA Oct., 1994) ed. by R. Bakish,
(Bakish Materials Corp. Publ., NJ, USA, 1994) pp.141-155. SciTech Connect
42) R.O.Suzuki, H.Nishiura, K.Ono, and L.J.Gauckler
"Thermodynamics and Phase Diagram of the Ag-Cu-O System"
Proc. 7th Inter. Symp. on Superconductivity ("ISS'94",
Kita-kyushu, JAPAN, Nov., 8-11, 1994)
"Advances in Superconductivity VII", ed. by K.Yamafuji and T.Morishita,
(Springer-Verlag, Tokyo, Japan 1995) Vol.1, pp.373-376.
41) R.O.Suzuki, K.Ono, and L.J.Gauckler
"Phase Equilibria in the Sr-Ca-Cu-O System"
Proc. 7th Inter. Symp. on Superconductivity ("ISS'94",
Kita-kyushu, JAPAN, Nov., 8-11, 1994) "Advances in
Superconductivity VII", ed. by K.Yamafuji and T.Morishita,
(Springer-Verlag, Tokyo, Japan 1995) Vol.1, pp.357-360.
40) K.Ono, Y.H.KIM, T.F.Kumon, T.H.Okabe and R.O.Suzuki
"Extra-low Oxygen Niobium and Titanium to Produce Ultra-Clean Superconductive Nb-Ti Alloy"
(Full text)
Proc. of "Klaus Schulze Symposium on Processing and
Applications of High Purity Refractry Metals and Alloys",
(Pittsburgh, USA, 18 Oct. 1993) ed. by P.Kumer, H.A.Jehn
and M.Uz, (The Minerals, Metals & Materials Soc., USA, 1994) pp.179-187.
39) 竹下博之, 鈴木亮輔, 小野勝敏
"SIMSによる金属中の軽元素分析"
まてりあ , 33 [4] (1994) pp.356-361.
38) R.O.Suzuki, P.Bohac and L.J.Gauckler
"Phase Equilibria and Thermodynamics in the Sr-Cu-O and Ca-Cu-O Systems"
Proc. 5th Inter. Symp. on Superconductivity ("ISS'92", Kobe, JAPAN, 1992),
"Advances in Superconductivity V", ed.by Y.Bando and H.Yamauchi,
(Springer-Verlag, Tokyo, Japan 1993) pp.399-402.
37) R.O.Suzuki, P.Bohac and L.J.Gauckler
"Thermodynamics and Phase Equilibria in the Ca-Cu-O System"
J.Amer.Ceram.Soc., 77 [1] (1994) pp.41-48.
36) R.Mueller, Th.Schweizer, P. Bohac, R.O.Suzuki and L.J.Gauckler
"Compositional Range of the Bi2Sr2CaCu2Ox HTc-
Superconductor and its Surrounding Phases"
Physica C203 (1992) pp.299-314.
35) R.O.Suzuki, P.Bohac and L.J.Gauckler
"Thermodynamics and Phase Equilibria in the Sr-Cu-O System"
J.Amer.Ceram.Soc., 75 [10] (1992) pp.2833-42.
34) T.H.Okabe, R.O.Suzuki, T.Oishi and K.Ono
"Preparation of Etra Low Oxygen Titanium by the Calcium-Halaide Flux Deoxidaton Process"
Proc. of Inter. Conf. of Titanium Products and Applications,
(Florida,USA,1991). "Titanium 1990,
Products and Applications, Proceedings of the Technical
Program from the 1990 International Conference",
(Titanium Developmennt Association, USA 1990) pp.822-29.
33) T.H.Okabe, R.O.Suzuki, T.Oishi and K.Ono
"Thermodynamic Properties of Dilute Titanium-Oxygen Solid Solution in Beta Phase"
Material Trans. JIM., 32 [5] (1991) pp.485-488. Mater Trans Online
32) R.O.Suzuki, T.Ueki, M.Ikezawa, T.H.Okabe, T.Oishi and K.Ono
"A Fundamental Study on Preparation of Al3Ti Powders by Calciothermic Reduction of Oxides"
Material Trans. JIM., 32 [3] (1991) pp.272-277. Mater Trans Online
31) 岡部 徹, 鈴木亮輔, 大石敏雄, 小野勝敏
"カルシウム-ハライドフラックス脱酸法による極低酸素チタンの製造"
鉄と鋼 77 [1] (1991) pp.93-99.
30) 鈴木亮輔(R.O.Suzuki)
"お絵かきソフトの渡り歩き"
バウンダリー, [June] (1990) pp.8-13.
29) R.O.Suzuki, S.Okada, T.Oishi and K.Ono
"Thermodynamics of Y2Cu2O5 and YCuO2 and Phase Equilibria in the Ba-Y-Cu-O System"
Materials Trans.,JIM., 31 [12] (1990) pp.1078-84. Mater Trans Online
28) S.Kambara, N.Omori, R.O.Suzuki, T.Oishi and K.Ono
"Determination of Oxygen Content in Ba2YCu3Ox in
Equilibrium with Oxygen Pressure of 0.2 - 10 atm"
J.Jpn.Ceram.Soc.Japan, Intern.Edition 98 [11] (1990) pp.1219-25.
27) 神原正三, 大森直也, 鈴木亮輔, 大石敏雄, 小野勝敏
"0.2～10atmの酸素と平衡するBa2YCu3Ox中の酸素の定量"
日本セラミックス協会学術論文誌, 98 [11] (1990) pp.1210-16.
26) 小野勝敏, 岡部 徹, 小川正人, 鈴木亮輔
"酸化チタンのカルシウム熱還元法による粉末チタンの製造"
鉄と鋼, 76 [4] (1990) pp.568-575.
25) R.O.Suzuki, S.Kambara, H.Tsuchida, K.Shimizu and K.Ono
"Phase Equilibria of Bi2O3-SrO-CaO-CuO System at 1123K in Air"
Proc. 2nd Inter. Symp. on Superconductivity,
(Tukuba,JAPAN,1989) "Advances in Superconductivity II",
ed.by T.Ishiguro and K.Kajimura, (Springer-Verlag, Japan 1990) pp.235-238.
24) R.O.Suzuki, M.Ikezawa, T.H.Okabe, T.Oishi and K.Ono
"Preparation of TiAl and Ti3Al Powders by Calciothermic Reduction of Oxides"
Material Trans. JIM., 31 [1] (1990) pp.61-68. Material Trans. Online
23) R.O.Suzuki, H.Sakamoto, T.Oishi and K.Ono
"Processes to Produce Ti-Al Alloy Powders by Calcium Co-Reduction from the Oxide"
Mem.Etud.Sci.Rev.Metal., 86 [10] (1989) pp.655-658.
(Re-print of Nr.18 because of the editor's selection)
22) R.O.Suzuki
"Preparation of Intermetallic Compounds by the Calciothermic Reaction"
J. Adv. Sci., 1 [1] (1989) pp.69-73.
21) 小野勝敏, 椊田幸富, 鈴木亮輔
"チタンの精錬・溶解に関する高温化学反応"
日本金属学会報, 28 [8] (1989) pp.672-679.
20) 鈴木亮輔
"超伝導酸化物の超伝導特性評価実験法"
日本鉱業会誌, 104 [7] (1988) pp.480-481.
19) R.O.Suzuki, M.Ogawa, T.Oishi and K.Ono
"Preparation of Ti Powders by the Calcium Vapor
Reduction of TiO2 and the Electron-Beam Melting"
Proc. 6th World Conf. on Titanium 1988,
(Cannes,France,1988), Societe Francaise de Metallurgie, Paris, 1989, vol II, pp.701-706.
18) R.O.Suzuki, H.Sakamoto, T.Oishi and K.Ono
"Processes to Produce Ti-Al Alloy Powders by Calcium Co-Reduction from the Oxide"
Proc. 6th World Conf. on Titanium 1988,
(Cannes,France,1988), Societe Francaise de Metallurgie, Paris, 1989, vol II, pp.889-900.
17) R.O.Suzuki, H.Nagai, T.Oishi and K.Ono
"Processes to Produce Superconducting Nb3Sn Powders from Nb-Sn Oxide"
J. Mater. Sci. 22 [6] (1987) pp.1999-2005.
16) R.O.Suzuki, S.Tsuda and P.H.Shingu
"Unidirectional Crystallization of Amorphous Te-Ge Alloy"
J. Mater. Sci. Lett., 4 [12](1985) pp.1495-1497.
15) 新宮秀夫, 鈴木亮輔, 石原慶一
"アモルファス金属の熱力学"
固体物理, 20 [8] (1985) pp.593-601.
14) R.O.Suzuki and P.H.Shingu
"Kinetics of Enthalpy Relaxation of Metallic Glasses"
Proc. 5Th. Int. Conf. on Rapidly Quenched Metals
(Wuertzburg,Germany,1984) pp.651-654.
13) S.R.Nishitani, K.N.Ishihara, R.O.Suzuki and P.H.Shingu
"Metastable Solid Solubility Limit of Carbon in the Ni-C System"
J. Mater. Sci. Lett., 4 (1985) pp.872-875.
12) 新宮秀夫, 鈴木亮輔, 石原慶一
"アモルファス合金の結晶化"
鉄と鋼, 70 [15] (1984) pp.1828-1832.
11) R.O.Suzuki and K.Osamura
"SAXS Study on the Crystallization of Amorphous Pd76Au6Si18 Alloys"
J. Mater. Sci. 19 [5](1984) pp.1476-1485.
10) 新宮秀夫, 鈴木亮輔, 石原慶一
"急冷と準安定平衡"
材料, 33 [3](1984) p.239-245.
9) R.O.Suzuki and P.H.Shingu
"Enthalpy Relaxation of Metallic Glasses near Tg"
Proc. 5th Int. Conf. Liquid and Amorphous Metals, (Los Angels,USA,1983),
J. Non-Cryst. Solids, 61&62 (1984) pp.1003-1008.
8) R.O.Suzuki, Y.Komatsu, K.F.Kobayashi and P.H.Shingu
"Formation and Crystallzation of Al-Fe-Si Amorphous Alloys"
J. Mater. Sci., 18 [4] (1983) pp.1195-1201.
7) R.O.Suzuki, K.Shibue, K.Osamura, P.H.Shingu and Y.Murakami
"DSC Study of Pd76Si18Au6 Amorphous Alloy"
J. Mater. Sci. Lett., 1 [1] (1982) pp.127-130.
6) P.H.Shingu, K.F.Kobayashi, R.O.Suzuki and K.Takeshita
"Cooling Process of the Single Roller Chill Block Casting"
Proc. 4th Int. Conf. on Rapidly Quenched Metals,
(Sendai,Japan,1981) Vol.1, pp.57-60.
5) Y.Sakamoto, H.Miyamoto, P.H.Shingu, R.O.Suzuki and S.Takayama
"Diffusion of Hydrogen through Amorphous Pd82Si18 and Pd76Si18Au6 Alloys"
Proc. 4th Int. Conf. on Rapidly Quenched Metals,
(Sendai,Japan,1981) Vol.2, pp.1645-1648.
4) K.Osamura, R.O.Suzuki and Y.Murakami
"SAXS Study on the Structure of Amorphous Metallic Alloys"
Proc. 4th Int. Conf. on Rapidly Quenched Metals,
(Sendai,Japan,1981) Vol.1, pp.431-434.
3) K.Osamura, K.Shibue, R.O.Suzuki and Y.Murakami
"SAXS Study on the Structure and Crystallization of Amorphous Metallic Alloys"
Colloid & Polymer Sci., 259 (1981) p.677-.
2) K.Osamura, K.Shibue, R.O.Suzuki, Y.Murakami and S.Takayama
"Study of the Structure and Crystallization of an Fe-17at%B Amorphous Alloy"
J. Mater. Sci., 16 [4](1981) pp.957-967.
1) K.Osamura, K.Shibue, R.O.Suzuki and Y.Murakami
"SAXS Study on the Structure and Crystallization of Amorphous Metallic Alloys"
Suppl. to Sci. Rep. RITU., A28,[3] No.1 (1980) pp.65-75.
戻る