[Japanese]

Publication List

Ryosuke O.Suzuki

23 Mar 2022


333) T. Fujimura, K. Takeshita, R.O. Suzuki,

     "Analysis of the Solidus Temperature of Multicomponent Steel by a Finite Thickness Model with Heat- and Solute-Transfer Equations in the Solid–Liquid Zone,"

     Metall. Mater. Trans. B., in press. DOI: 10.1007/s11663-022-02429-1 .

332) Shungo Natsui, Ryota Shibuya, Ryosuke O. Suzuki, Tatsuya Kikuchi, Akihisa Ito, Takahiro Sato, Rei Yamamoto and Hiroshi Nogami,

     "Quantification of the Impact of Residual H2O on Cathodic Behavior in Molten CaCl2 Electrolysis",

     J. Sustainable Metallurgy, 8, (2022) pp.532–540. DOI: 10.1007/s40831-022-00516-w .

331) Tatsuya Kikuchi, Motoki Yamashita, Mana Iwai, Ryosuke O. Suzuki

     "Self-Ordering of Porous Anodic Alumina Fabricated by Anodizing in Chromic Acid at High Temperature",

     J. Electrochem. Soc., 168 (2021) 093501 DOI:10.1149/1945-7111/ac2101 .

330) Ryosuke O. Suzuki, Shungo Natsui, Tatsuya Kikuchi

     "Recent Studies on Titanium Refining: 2017–2020"

     Mater. Trans., 62 [6] (2021) 905-913. DOI: 10.2320/matertrans.MT-M2020373.

329) Mana Iwai, Tatsuya Kikuchi, Ryosuke O. Suzuki,

     "Self-ordered nanospike porous alumina fabricated under a new regime by an anodizing process in alkaline media",

     Scientific Reports, 11, (2021) 7240 DOI: 10.1038/s41598-021-86696-z .

328) Eltefat Ahmadi, Ryosuke O. Suzuki,

     "Tantalum MetalProduction Through High-Efficiency Electrochemical Reduction of TaS2 in Molten CaCl2",

     Journal of Sustainable Metallurgy, 7 (2021) 437-447. DOI: 10.1007/s40831-021-00347-1 .

327) Ryosuke O. Suzuki, Yuta Yashima, Takumi Kaneko, Eltefat Ahmadi, Tatsuya Kikuchi, Takafumi Watanabe and Genki Nogami

     "Synthesis of Silicon Sulfide by Using CS2 Gas",

     Metall. Mater. Trans. B, 52 (2021) 1379-1391.  DOI: 10.1007/s11663-021-02103-y .

326) Tatsuya Kikuchi, Fumiya Onoda, Mana Iwai, Ryosuke O. Suzuki

     "Influence of sub-10 nm anodic alumina nanowire morphology formed by two-step anodizing aluminum on water wettability and slipping behavior",

     Applied Surface Science, 546 (2021) 149090. DOI: 10.1016/j.apsusc.2021.149090  .

325) Eltefat Ahmadi, Ryosuke O. Suzuki, Takumi Kaneko, Tatsuya Kikuchi,

     "A Sustainable Approach for Producing Ti and TiS2 from TiC"

     Metall. Mater. Trans. B, 52 (2020) 77-87. DOI: 10.1007/s11663-020-01988-5 .

324) R. O. Suzuki, Y. Yashima, N. Suzuki, E. Ahmadi, S. Natsui, T. Kikuchi,

     "Titanium Production via Titanium Sulfide",

     MATEC Web of Conferences 321, The 14th World Conference on Titanium (Ti 2019) (2020) 07003, DOI: 10.1051/matecconf/202032107003 

323) Mana Iwai, Tatsuya Kikuchi, Ryosuke O. Suzuki,

     "High-speed galvanostatic anodizing without oxide burning using a nanodimpled aluminum surface for nanoporous alumina fabrication",

     Applied Surface Science, 537 (2021) 147852. DOI:10.1016/j.apsusc.2020.147852 

322) Shungo Natsui, Kazui Tonya, Hiroshi Nogami, Tatsuya Kikuchi, Ryosuke O Suzuki,

     "SPH Simulations of binary droplet deformation considering the Fowkes theory",

     Chemical Engineering Science, 229 (2021) 116035. DOI:10.1016/j.ces.2020.116035 

321) Eltefat Ahmadi, Ryosuke O. Suzuki, Tatsuya Kikuchi, Takumi Kaneko, Yuta Yashima

     "Towards a Sustainable Technology for Production of Extra-Pure Ti Metal: Electrolysis of Sulfurized Ti(C,N) in Molten CaCl2"

     International Journal of Minerals, Metallurgy and Materials (IJMMM), 27 (2020) 1635-1643. DOI: 10.1007/s12613-020-2162-5 

320) Tatsuya Kikuchi, Yusuke Suzuki, Mana Iwai, and Ryosuke O. Suzuki,

     "Anodizing Aluminum and Its Alloys in Etidronic Acid to Enhance Their Corrosion Resistance in a Sodium Chloride Solution",

     Journal of The Electrochemical Society, 167 (2020) 121502. DOI: 10.1149/1945-7111/abaa6b 

319) Ryota Shibuya, Shungo Natsui, Hiroshi Nogami, Tatsuya Kikuchi, Ryosuke O. Suzuki,

     "Characterization of the cathodic thermal behavior of molten CaCl2 and its hygroscopic chloride mixture during electrolysis",

     J. Electrochem. Soc., 167 (10) (2020) 102507. DOI: 10.1149/1945-7111/ab9961 

318) Tatsuya Kikuchi, Daiki Nakajima, Ryunosuke Kondo, Ryosuke O. Suzuki, Shungo Natsui,

     "Nanostructure COntrol of ALuminium Surface via Anodizing and Emergence of Superhydrophilicity/Superhydrophobicity"

     Functions and Materials, 40 (6) (2020) 24-30. (in Japanese). Back number

317) Mana Iwai, Tatsuya Kikuchi, Ryosuke O. Suzuki,

     "Initial Structural Changes of Porous Alumina Film via High-Resolution Microscopy Observations"

     ECS Journal of Solid State Science and Technology, 9 (4) (2020) 044004. DOI: 10.1149/2162-8777/ab89ba 

316) Tatsuya Kikuchi, Shunta Akiya, Kaito Kunimoto, Ryosuke O. Suzuki, Shungo Natsui,

     "Photoluminescence from Anodic Aluminum Oxide Formed via Etidronic Acid Anodizing and Enhancing the Intensity"

     Materials Transactions, 61 (6) (2020) 1130-1137. DOI: 10.2320/matertrans.MT-M2020010 

315) Ryosuke O. Suzuki, Norihito Sakaguchi, Tatsuya Kikuchi, Shungo Natsui,

     "Carbon nano-tube formation by CO2 reduction",

     in "Mineralization of CO2 in non-oil society - Chemical and Biological approaches", CMC publishing, Tokyo  July 31, 2020..

314) Takumi Kaneko, Yuta Yashima, Eltefat Ahmadi, Shungo Natsui, Ryosuke O. Suzuki,

     "Synthesis of Sc sulfides by CS2 sulfurization",

     Journal of Solid State Chemistry, 285 (2020) 121268. DOI: 10.1016/j.jssc.2020.121268  .

313) Shungo Natsui, Akinori Sawada, Hiroshi Nogami, Tatsuya Kikuchi, Ryosuke O. Suzuki,

     "Numerical simulation of coexisting solid-liquid slag trickle flow in a coke bed by the SPH method with a non-Newtonian fluid model",

     ISIJ International, 60 (7) (2020)1445-1452. DOI: 10.2355/isijinternational.ISIJINT-2019-701 

312) Shungo Natsui, Akinori Sawada, Hiroshi Nogami, Tatsuya Kikuchi, Ryosuke O. Suzuki,

     "Topological consideration of 3-D local void structure for static holdup site in packed bed",

     ISIJ International, 60 (7) (2020) 1453-1460. DOI: 10.2355/isijinternational.ISIJINT-2019-702 

311) Shungo Natsui, Kazui Tonya, Hiroshi Nogami, Tatsuya Kikuchi, Ryosuke O. Suzuki, Ko-ichiro Ohno, Sohei Sukenaga, Tatsuya Kon, Shingo Ishihara, Shigeru Ueda

     "Numerical Study of Binary Trickle Flow of Liquid Iron and Molten Slag in Coke Bed by Smoothed Particle Hydrodynamics",

     Processes, 8 (2) (2020) 221. DOI: 10.3390/pr8020221 

310) Ryosuke O. Suzuki, Shungo Natsui, Tatsuya Kikuchi,

     "Chapter 12 - OS Process: Calciothermic reduction of TiO2 via CaO electrolysis in molten CaCl2"

     in "Extractive Metallurgy of Titanium, Conventional and Recent Advances in Extraction and Production of Titanium Metal",

     Editor(s): Zhigang Zak Fang, Francis H. Froes, Ying Zhang, Elsevier, (2020) pp.287-313. ISBN 9780128172001, DOI: 10.1016/B978-0-12-817200-1.00012-0 .

309) Tatsuya Kikuchi, Taiki Taniguchi, Ryosuke O Suzuki, Shungo Natsui,

     "Fabrication of a Plasma Electrolytic Oxidation/Anodic Aluminum Oxide Multi-Layer Film via One-Step Anodizing Aluminum in Ammonium Carbonate"

     Thin Solid Films, 697, (2020) 137799 DOI: 10.1016/j.tsf.2020.137799 .

308) Eltefat Ahmadi, Ryosuke O. Suzuki, 

     "An Innovative Process for Production of Ti Metal Powder via TiSx from TiN"

     Metall. Mater. Trans. B, 51 [1] (2020) 140-148. DOI: 10.1007/s11663-019-01730-w  .

307) Ryosuke O. SUzuki

     "Thermoelectric power generation in water-cooled refrigerator",

     J. Thermoelectric Soc. Japan, 16, [3] (2020) 131-138. DOI: 10.50972/thermoelectrics.16.3_131 , On line 

     Thermoelectric Society of Japn gave us the best paper award 2021

306) Shungo Natsui, Takuya Sudo, Ryota Shibuya, Hiroshi Nogami, Tatsuya Kikuchi, Ryosuke O. Suzuki,

     "Visualization of TiO2 reduction behavior in molten salt electrolysis",

     Metallurgical Materials Transactions B, 51 [1] (2020) 11-15. DOI: 10.1007/s11663-019-01733-7  video available  

305) Daiki Nakajima, Tatsuya Kikuchi, Taiki Yoshioka, Hisayoshi Matsushima, Mikito Ueda, Ryosuke O. Suzuki, Shungo Natsui

     "A Superhydrophilic Aluminum Surface with Fast Water Evaporation Based on Anodic Alumina Bundle Structures via Anodizing in Pyrophosphoric Acid",

     Materials, 12 (2019) 3497 doi:10.3390/ma12213497 .

304) Yasushi Haraguchi, Ryota Shibuya, Shungo Natsui, Tatsuya Kikuchi, Ryosuke O. Suzuki

     "Gas Generation Reactions during TiO2 Reduction Using Molten Salt"

     Journal of the Japan Institute of Metals and Materials, 83 [11] (2019), pp.441-448. DOI: 10.2320/jinstmet.JAW201901  FREE ACCESS 

303) Mana Iwai, Tatsuya Kikuchi, Ryosuke O. Suzuki, Shungo Natsui

     "Electrochemical and Morphological Characterization of Porous Alumina Formed by Galvanostatic Anodizing in Etidronic Acid"

     Electrochimica Acta, 320, (2019) 134606 DOI: 10.1016/j.electacta.2019.134606 

302) Yusuke Suzuki, Kai Kawahara, Tatsuya Kikuchi, Ryosuke O. Suzuki,  Shungo Natsui

     "Corrosion-Resistant Porous Alumina Formed via Anodizing Aluminum in Etidronic Acid and its Pore-Sealing Behavior in Boiling Water"

     Journal of The Electrochemical Society, 166 (12) (2019) C261-C269. DOI:10.1149/2.0221912jes 

301) Tatsuya Kikuchi, Kaito Kunimoto, Hiroshi Ikeda, Daiki Nakajima, Ryosuke O. Suzuki, Shungo Natsui

     "Fabrication of anodic porous alumina via galvanostatic anodizing in alkaline sodium tetraborate solution and their morphology",

     Journal of Electroanalytical Chemistry, 846 (2019) 113152. DOI: 10.1016/j.jelechem.2019.05.034 

300) Takahiro Matsuzaki, Ryosuke O. Suzuki, Shungo Natsui, Tatsuya Kikuchi, Mikito Ueda

     "Solubility of CaS in CaCl2-LiCl Eutectic Melt",

     Materials Transactions, 60 [3] (2019) 411-415. DOI: 10.2320/matertrans.MA201809  

299) Gudrun Savarsdottir, Geir Martin Haarberg, Ryosuke O. Suzuki

     "Preface: Special Issue on Titanium Production by Molten Salt Electrochemical Process",

     Materials Transaction, 60 [3] (2019) p.373. DOI: 10.2320/matertrans.MPR2019901  

298) S. Natsui, R. Nashimoto, K. Kadoya, A. Sawada, T. Kikuchi, R.O. Suzuki

     "Review: Mathematical analysis of interface - Smoothed Particle Hydrodynamics Method-",

     Journal of MMIJ, 135 [8](2019) pp.71-82. DOI:10.2473/journalofmmij.135.71 

297) Shungo Natsui, Ryota Nashimoto, Tatsuya Kikuchi, and Ryosuke O. Suzuki,

     "SPH Analysis of Interfacial Flow of the Two Immiscible Melts"

     in: Advances in Molten Slags, Fluxes, and Salts: Proc. 10th Intern. Conf. Molten Slags, Fluxes and Salts (MOLTEN16)

     Edited by: R.G. Reddy, P.Chaubal, P. C. Pistorius, and U. Pal, TMS (The Minerals, Metals & Materials Society), 2016

     pp.589-596. DOI: 10.1007/978-3-319-48769-4_63 

296) Tatsuya Kikuchi, Mana Iwai, Daiki Nakajima, Shungo Natsui, Ryosuke O. Suzuki

     "Porous Anodic Oxide Films on Aluminium",

     Journal of the Surface Finishing Society of Japan, 69,(2018)554-561. DOI: 10.4139/sfj.69.554   

295) Daiki Nakajima, Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki

     "Advancing and Receding Contact Angle Investigations for Highly Sticky and Slippery Aluminum Surfaces Fabricated by Nanostructured Anodic Oxide"

     RSC Advances, 8 (2018), 37315-37323.  DOI: 10.1039/c8ra07712f  

294) Takahiro Matsuzaki, Ryosuke O. Suzuki, Shungo Natsui, Tatsuya Kikuchi and Mikito Ueda

     "Solubility of CaS in Molten CaCl2",

     Materials Transactions, 60 [3] (2019) 386-390. DOI: 10.2320/matertrans.MA201803  

293) Ryosuke O. Suzuki, "Report 6th International Round Table on Titanium Production in Molten Salt (Ti-RT2018)",

     Titanium Japan, 66 [4] (2018) 250-251. 

292) Ryosuke O. Suzuki, Hiromi Noguchi, Yasushi Haraguchi, Shungo Natsui, Tatsuya Kikuchi,

     "Metal Production in CaCl2-based Melts",

     ECS Transactions, 86 (14) (2018) 45-53. DOI: 10.1149/08614.0045ecst 

291) Hiroki Ikeda, Mana Iwai, Daiki Nakajima, Tatsuya Kikuchi, Shungo Natsui, Norihito Sakaguchi, Ryosuke O. Suzuki,

     "Nanostructural Characterization of Ordered Gold Particle Arrays Fabricated via Aluminum Anodizing, Sputter Coating, and Dewetting",

     Applied Surface Science, 465 (2019) 747-753. DOI: 10.1016/j.apsusc.2018.09.229 

290) Toshio Fujimura, Kunimasa Takeshita, Ryosuke O. Suzuki

     "Mathematical Analysis of the Solidification Behavior of Multi-Component Alloy Steel Based on the Heat- and Solute-Transfer Equations in the Liquid–Solid Zone",

     International Journal of Heat and Mass Transfer, 130 [3](2019) 797-812. DOI: 10.1016/j.ijheatmasstransfer.2018.09.093 

289) Shungo Natsui, Akinori Sawada, Tatsuya Kikuchi and Ryosuke O. Suzuki,

     "Holdup Characteristics of Melt in Coke Beds of Different Shapes",

     ISIJ International, 58 [9] (2018) pp. 1742–1744 DOI: 10.2355/isijinternational.ISIJINT-2018-369 

288) Shungo Natsui, Takuya Sudo, Takumi Kaneko, Kazui Tonya, Daiki Nakajima, Tatsuya Kikuchi, and Ryosuke O. Suzuki,

     "Spontaneous colloidal metal network formation driven by molten salt electrolysis",

     Scientific Reports, 8, Article number: 13114 (2018) DOI: 10.1038/s41598-018-31521-3 

287) Shungo Natsui, Ryota Nashimoto, Daiki Nakajima, Tatsuya Kikuchi and Ryosuke O. Suzuki

     "Column and film lifetimes in bubble-induced two-liquid flow",

     Physical Review E97 (6), (2018) 062802 DOI: 10.1103/PhysRevE.97.062802  

286) Ryosuke O. Suzuki, Nobuyoshi Suzuki, Yuta Yashima, Shungo Natsui, Tatsuya Kikuchi,

     "Calciothermic Reduction and Electrolysis of Sulfides in CaCl2 Melt",

     Proceedings of the First Global Conference on Extractive Metallurgy (Extraction2018), ed. by B.R.Davis, M.S.Moats, S.Wang,

     The Minerals, Metals & Materials Society 2018, Springer, Cham, Switzerland,

     pp.763-771. ISSN 2367-1181 ISSN 2367-1696 (electronic), DOI: 10.1007/978-3-319-95022-8_60 

285) Eltefat Ahmadi, Yuta Yashima, Ryosuke O.Suzuki, and Sheikh Abdul Rezan,

     "Formation of Titanium Sulfide from Titanium Oxycarbonitride by CS2 Gas"

     Metall. Mater. Trans. B, 49(4) (2018) 1808-21. DOI: 10.1007/s11663-018-1278-8  

284) Shungo Natsui, Akinori Sawada, Koki Terui, Yusuke Kashihara, Tatsuya Kikuchi, and Ryosuke O. Suzuki

     "Evaluation of coke degradation effect on flow characteristics in packed bed using 3D scanning 

     for rotational mechanical strength test and solid.liquid.gas three.phase dynamic model analysis"

     Tetsu-to-Hagané, 104 [7](2018) 347-357. in Japanese. DOI:10.2355/tetsutohagane.TETSU-2018-005  

     The Iron and Steel Institute of Japan selected as the Tawara Prize (best paper award) of 2018. 

283) Toshio Fujimura, Kunimasa Takeshita, Ryosuke O. Suzuki,

     "Mathematical Analysis of the Solidification Behavior of Plain Steel Based on Solute- and Heat-Transfer Equations in the Liquid–Solid Zone",

     Metall. Materi. Trans. B, 49(2) (2018) 644-657. DOI: 10.1007/s11663-017-1149-8 

282) Hiromi Noguchi, Shungo Natsui, Tatsuya Kikuchi, Ryosuke O. Suzuki,

     "Reduction of CaTiO3 by Electrolysis in the Molten Salt CaCl2-CaO",

     Electrochemistry, 86(2) (2018) 82-87 DOI: 10.5796/electrochemistry.17-00078 

281) Daiki Nakajima, Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki,

     "Mirror-Finished Superhydrophobic Aluminum Surfaces Modified by Anodic Alumina Nanofibers and Self-Assembled Monolayers",

     Applied Surface Science, 440 (2018) 506-513 DOI: 10.1016/j.apsusc.2018.01.182 

280) Tatsuya Kikuchi, Daiki Nakajima, Daiki Ikeda, Ryunosuke Kondo, Kai Kawahara, Kaito Kunimoto, Mana Iwai, Yushuke Suzuki, Shunta Akiya, Akimasa Takenaga, Osamu Nishinaga, Shungo Natsui, Ryosuke O. Suzuki,

     "Advanced functional aluminum materials based on nanostructured surface" (in Japanese)

     Journal of Japan Institute of Light Metals, 68 (4) (2018) 211-218. DOI:10.2464/jilm.68.211  .

279) Baiyi Lu, Xiangning Meng, Miaoyong Zhu, Ryosuke O. Suzuki,

     "Thermoelectric System Absorbing Waste Heat from a Steel Ladle", 

     J. Electr. Mater., 47 (6) (2018) 3238–3247. DOI: 10.1007/s11664-018-6073-4 

278) Sae Oki, Shungo Natsui, Ryosuke O. Suzuki,

     "Performance Analysis of Thermoelectric Modules Consisting of Square Truncated Pyramid Elements Under Constant Heat Flux", 

     J. Electr. Mater., 47 (6) (2018) 3288-3297. DOI: 10.1007/s11664-017-6055-y  

277) Shungo Natsui, Ko-ichiro Ohno, Sohei Sukenaga, Tatsuya Kikuchi and Ryosuke O. Suzuki

     "Detailed Modeling of Melt Dripping in Coke Bed by DEM – SPH"

     ISIJ Intern., 58 (2) (2018) 282-291. DOI: 10.2355/isijinternational.ISIJINT-2017-496 

276) Kai Kawahara, Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki

     "Fabrication of ordered submicrometer-scale convex lens array via nano imprint lithography using an anodized aluminum mold"

     Microelectronic Engineering, 185-186 (2018) 61-68. DOI: 10.1016/j.mee.2017.10.016 

275) Ryosuke O. Suzuki, Fumiya Matsuura, Shungo Natsui and Tatsuya Kikuchi,

     "Conversion of CO2 to CO gas using molten CaCl2 and ZrO2 anode",

     Proceedings of 1st International Conference on Energy and Material Efficiency and CO2 Reduction in the Steel Industry, (EMECR2017),

     (The Iron and Steel Institute of Japan, ISIJ, 11-13 Oct 2017, Kobe International Conference Center, Kobe, Japan) pp.360-363. .

274) Shungo Natsui, Akinori Sawada, Tatsuya Kikuchi, and Ryosuke O. Suzuki,

     "A direct numerical simulation of trickle flow in cokes bed",

     Proceedings of 1st International Conference on Energy and Material Efficiency and CO2 Reduction in the Steel Industry, (EMECR2017),

     (The Iron and Steel Institute of Japan, ISIJ, 11-13 Oct 2017, Kobe International Conference Center, Kobe, Japan) pp.480-482. 

273) Shungo Natsui, Akinori Sawada, Koki Terui, Yusuke Kashihara, Tatsuya Kikuchi, and Ryosuke O. Suzuki,

    “DEM-SPH Study of Molten Slag Trickle Flow in Coke Bed”,

     Chemical Engineering Science, 175, (2018) pp.25–39. DOI: 10.1016/j.ces.2017.09.031 .

272) Tatsuya Kikuchi, Akimasa Takenaga, Shungo Natsui, Ryosuke O. Suzuki

     "Advanced Hard Anodic Alumina Coatings via Etidronic Acid Anodizing",

     Surface and Coatings Technology, 326 (2017) pp.72-78. DOI: 10.1016/j.surfcoat.2017.07.043 .

271) Ryunosuke Kondo, Daiki Nakajima, Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki

     "Superhydrophilic and superhydrophobic aluminum alloys fabricated via pyrophosphoric acid anodizing and fluorinated SAM modification",

     Journal of Alloys and Compounds, 725 (2017) pp.379-387. DOI: 10.1016/j.jallcom.2017.07.183 

270) Baiyi Lu, Xiangning Meng, Yue Tian, Miaoyong Zhu, Ryosuke O. Suzuki,

     "Thermoelectric performance using counter-flowing thermal fluids",

     Intern. J. of Hydrogen Energy, 42 (2017) pp.20835-20842.. DOI: 10.1016/j.ijhydene.2017.06.132  

269) Ryosuke O. Suzuki, Erika Takahashi, Mika Kitamura, Yuta Yashima, Hiromi Noguchi, Shungo Natsui and Tatsuya Kikuchi,

     "Titanium Fabrication via CaCl2 from FeTiO3"

     Proc. of the 6th Asian Conference on Molten Salts Chemistry and Technology, (June 13-16, 2017, Gyeongju, Korea)

     OA11_Ryosuke O. Suzuki_Hokkaido University.doc 

268) Shungo Natsui, Takuya Sudo, Tatsuya Kikuchi, Ryosuke O. Suzuki,

     "Morphology of lithium droplets electrolytically deposited in LiCl-KCl-Li2O melt",

     Electrochemistry Communications, 81(2017), pp.43-47. DOI: 10.1016/j.elecom.2017.06.001 

267) Nobuyoshi Suzuki, Ryosuke O. Suzuki, Shungo Natsui, Tatsuya Kikuchi,

     "Branched morphology of Nb powder particles fabricated by calciothermic reduction in CaCl2 melt",

     Journal of Physics and Chemistry of Solids, 110 (2017) pp.58-63. DOI: 10.1016/j.jpcs.2017.05.032  

266) Tatsuya Kikuchi, Jun Kawashima, Shungo Natsui, Ryosuke O. Suzuki,

     "Fabrication of Porous Tungsten Oxide via Anodizing in an Ammonium Nitrate / Ethylene Glycol / Water Mixture for Visible Light-Driven Photocatalyst",

     Applied Surface Science, 422 (2017) 130-137. DOI: 10.1016/j.apsusc.2017.05.256 

265) Xiangning Meng, Baiyi Lu, Miaoyong Zhu, Ryosuke O. Suzuki

     "Thermoelectric Generation Using Counter-Flows of Ideal Fluids",

     Journal of Electronic Materials, 46(8) (2017) 5136-5144. DOI: 10.1007/s11664-017-5518-5 , 

264) Katsutoshi Ono, Toru H. Okabe, and Ryosuke O. Suzuki,

     "Design, Test and Theoretical Assessments for Reduction of Titanium Oxide to Produce Titanium in Molten Salt"

     Materials Transaction, 58 [3] (2017) pp.313-318. DOI: 10.2320/matertrans.MK201604 

263) Ryosuke O. Suzuki

     "Preface: Special Issue on New Proposals on Titanium Production and Molten Salts",

     Materials Transaction, 58 [3] (2017) p.305. DOI: 10.2320/matertrans.MPR2017901 

262) Shungo Natsui, Ryota Nashimoto, Daiki Nakajima, Takehiko Kumagai, Tatsuya Kikuchi, and Ryosuke O. Suzuki,

     "Observation of Interface Deformation in Sodium Polytungstate Solution–Silicone Oil System due to Single Rising Bubble"

     ISIJ International, 57 (2) (2017) pp.394-396. DOI: 10.2355/isijinternational.ISIJINT-2016-521 

261) Shunta Akiya, Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki

     "Nanostructural Characterization of Large-Scale Porous Alumina Fabricated via Anodizing in Arsenic Acid Solution",

     Applied Surface Science, 403 (2017) pp.652-661. DOI:10.1016/j.apsusc.2017.01.243 

260) Shungo Natsui, Ryota Nashimoto, Takehiko Kumagai, Tatsuya Kikuchi, and Ryosuke O. Suzuki,

     "An SPH Study of Molten Matte-Slag Dispersion",

     Metallurgical and Materials Transactions B, 48B (3) (2017) pp.1792–1806. DOI:10.1007/s11663-017-0930-z.

259) Takahiro Matsuzaki, Shungo Natsui, Tatsuya Kikuchi, and Ryosuke O. Suzuki,

     "Electrolytic reduction of V3S4 in molten CaCl2",

     Materials Transaction, 58 [3] (2017) pp.371-376. DOI: 10.2320/matertrans.M2016305 

     Japan Institute of Metals selected as the best paper award of 2017. 

258) Shungo Natsui, Hifumi Takai, Ryota Nashimoto, Ko.ichiro Ohno, Sohei Sukenaga, Tatsuya Kikuchi, and Ryosuke O. Suzuki

     "Capturing the Non-spherical Shape of Granular Media and Its Trickle Flow Characteristics Using Fully-Lagrangian Method",

     AIChE Journal, 63(6) (2017) pp.2257-2271, DOI: 10.1002/aic.15538.

257) Ryosuke O. Suzuki,

     "Outline of the 5th International Round Table on Titanium Production in Molten Salt (I)(II)(III)",

     Titanium Japan, 64 [4] (2016) pp.270-277 , 65 [1] (2017) pp.36-42 , , 65 [2] (2017) pp.120-123 .

256) Nobuyoshi Suzuki, Mariko Tanaka, Hiromi Noguchi, Shungo Natsui, Tatsuya Kikuchi, and Ryosuke O. Suzuki,

     "Calcium Reduction of TiS2 in CaCl2 Melt",

     Materials Transaction, 58 [3] (2017) pp.367-370. DOI: 10.2320/matertrans.MK201613 

255) Ryosuke O. Suzuki, Hiromi Noguchi, Hiromasa Hada, Shungo Natsui, Tatsuya Kikuchi,

     "Reduction of CaTiO3 in Molten CaCl2 - as Basic Understanding of Electrolysis",

     Materials Transaction, 58 [3] (2017) pp.341-349. DOI: 10.2320/matertrans.MK201625 

254) Tatsuya Kikuchi, Daiki Nakajima, Shungo Natsui, Ryosuke O. Suzuki,

     "Fabrication of Alumina Nanofibers via Anodizing and Its Surface Functionalization"

     Journal of the Surface Finishing Society of Japan, 67 [10] (2016) pp.527-532. DOI:10.4139/sfj.67.527  

253) Sae Oki, Shungo Natsui, Ryosuke O. Suzuki,

     "Performance simulation of flat plate thermoelectric module consisting of square truncated pyramid elements", 

     J. Electr. Mater., 46 [5] (2017) pp.2691-2696. DOI:10.1007/s11664-016-4905-7 

252) Nobuyoshi Suzuki, M. Tanaka, H. Noguchi, S. Natsui, T. Kikuchi, Ryosuke O. Suzuki,

     "Reduction of TiS2 By OS Process in CaCl2 Melt",

     PRiME 2016/230th ECS Meeting (October 2-7, 2016), 

     ECS Transactions, 75 [15] (2016) 507-515. DOI: 10.1149/07515.0507ecst

251) Ryosuke O. Suzuki, Fumiya Matsuura, Shungo Natsui, and Tatsuya Kikuchi,

     "CO Gas Production By CO2 Gas Decomposition in Molten Salt Electrolysis",

     PRiME 2016/230th ECS Meeting (October 2-7, 2016), 

     ECS Transactions, 75 [15] (2016) 533-542. DOI: 10.1149/07515.0533ecst

250) Daiki Nakajima, Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki

     "Superhydrophilicity of a nanofiber-covered aluminum surface fabricated via pyrophosphoric acid anodizing",

     Applied Surface Science, 389 (2016) pp.173-180. DOI:10.1016/j.apsusc.2016.06.088   

249) Ryunosuke Kondo, Tatsuya Kikuchi, Shungo Natsui, and Ryosuke O. Suzuki,

     "Fabrication of Self-ordered Porous Alumina via Anodizing in Sulfate Solutions",

     Materials Letters, 183, (2016) pp.285-289. DOI:10.1016/j.matlet.2016.07.109  

248) Akimasa Takenaga, Tatsuya Kikuchi, Shungo Natsui, and Ryosuke O. Suzuki

     "Exploration for the Self-ordering of Porous Alumina Fabricated via Anodizing in Etidronic Acid",

     Electrochimica Acta, 211, (2016) pp.515-523. DOI:10.1016/j.electacta.2016.06.071  

247) Sumito Ozawa, Hidetoshi Matsuno, Akio Fujibayashi, Takuya Uchiyama, Takafumi Wakamatsu, Norihito Sakaguchi, and Ryosuke O. Suzuki,

     Influence of gas injection pipe on CO2 decomposition by CaCl2-CaO molten salt and ZrO2 solid electrolysis

     ISIJ Intern. 56 [11] (2016) 2093-2099. DOI: 10.2355/isijinternational.ISIJINT-2016-179  

246) Xengning Meng, and Ryosuke O. Suzuki, 

     Helical configuration for thermoelectric generation",

     Applied Thermal Engineering, 99 (2016) pp.352-357. DOI: 10.1016/j.applthermaleng.2016.01.061

245) Tristan Barbier, Emmanuel Combe, Ryoji Funahashi, Tomonori Takeuchi, Masataka Kubouchi, Yuzuru Miyazaki, Emmanuel Guilmeau, and Ryosuke O. Suzuki,

     "Structural Investigation and Indium Substitution in the Thermoelectric Mn2.7Cr0.3Si4Al2-xInx Series",

     J. Electr. Mater., 45 [3] (2016) 1992-1999. DOI: 10.1007/s11664-016-4365-0 

244) Shungo Natsui, Ryota Nashimoto, Hifumi Takai, Takehiko Kumagai, Tatsuya Kikuchi, and Ryosuke O. Suzuki,

     "Temperature Dependence of Behavior of Interface between Molten Sn and LiCl-KCl Eutectic Melt Due to Rising Gas Bubble",

     Metallurgical and Materials Transactions B, 47(3) (2016) 1532-1537. DOI: 10.1007/s11663-016-0618-9 

243) Shunta Akiya, Tatsuya Kikuchi, Shungo Natsui, Norihito Sakaguchi, and Ryosuke O. Suzuki

     "Self-ordered Porous Alumina Fabricated via Phosphonic Acid Anodizing",

     Electrochimica Acta, 190 (2016) pp.471-479. DOI:10.1016/j.electacta.2015.12.162  

242) Shungo Natsui, Ryota Nashimoto, Hifumi Takai, Takehiko Kumagai, Tatsuya Kikuchi, Ryosuke O Suzuki,

     "SPH Simulations of the Behavior of the Interface between Two Immiscible Liquid Stirred by the Movement of a Gas Bubble",

     Chemical Engineering Science, 141 (2016) 342-355. DOI: 10.1016/j.ces.2015.11.018

241) Ryosuke O. Suzuki, Keita O. Ito and Sae Oki,

     "Analysis of the performance of thermoelectric module under concentrated radiation heat flux",

     J. Electr. Mater., 45 [3] (2016) 1827-1835. DOI: 10.1007/s11664-015-4237-z 

240) Sumito Ozawa, Hidetoshi Matsuno, Akio Fujibayashi, Takuya Uchiyama, Takafumi Wakamatsu, Norihito Sakaguchi, Ryosuke O. Suzuki,

     "Influence of gas injection pipe on CO2 decomposition by CaCl2-CaO molten salt and ZrO2 solid electrolysis", 

     Tetsu-to-Hagene, Vol.102, No.4 (2016) pp.217-223. DOI: 10.2355/tetsutohagane.TETSU-2015-025.  

239) Sae Oki, Keita O. Ito, Shungo Natsui, Ryosuke O. Suzuki,

     "Numerical Optimization of Trapezoidal Thermoelectric Elements for Double-Pipe-Shaped Module", 

     J. Electr. Mater., 45 [3] (2016) 1358-1364. DOI: 10.1007/s11664-015-4034-8

238) Shungo Natsui, Tatsuya Kikuchi, and Ryosuke O. Suzuki,

     "Blast Furnace Modeling by Euler-Lagrange Method", 

     Materia Japan (Bull. Jpn. Inst. Metals), 54 (9) (2015) p.432-435. (in Japanese) DOI: 10.2320/materia.54.432

237) Ryosuke. O. Suzuki, "Front Page: How to realize thermoelectric generation", 

     J. Thermoelectric Soc. Japan, 12(1) (Aug, 2015) p.1.(in Japanese)

236) Shungo Natsui, Hifumi Takai, Ryota Nashimoto, Tatsuya Kikuchi, and Ryosuke O. Suzuki,

     "Model Study of the Effect of Particles Structure on the Heat and Mass Transfer through the Packed Bed in Ironmaking Blast Furnace",

     International Journal of Heat and Mass Transfer, 91 (2015), 1176-1186. DOI: 10.1016/j.ijheatmasstransfer.2015.08.033  

235) Daiki Nakajima, Tatsuya Kikuchi, Shungo Natsui, Norihito Sakaguchi, and Ryosuke O. Suzuki

     "Fabrication of a novel aluminum surface covered by numerous high-aspect-ratio anodic alumina nanofibers"

     Applied Surface Science, 356 (2015) pp.54-62. DOI:10.1016/j.apsusc.2015.08.030  

234) Shunta Akiya, Tatsuya Kikuchi, Shungo Natsui, and Ryosuke O. Suzuki

     "Optimum Exploration for the Self-Ordering of Anodic Porous Alumina Formed via Selenic Acid Anodizing"

     Journal of the Electrochemical Society, 162 (10) (2015) E244-E250. DOI: 10.1149/2.0391510jes 

233) Tatsuya Kikuchi, Ryoma Ishida, Shungo Natsui, Takehiko Kumagai, Isao Ogino, Norihito Sakaguchi, Mikito Ueda and Ryosuke O. Suzuki

     "Carbon Nanotube Synthesis via the Calciothermic Reduction of Carbon Dioxide with Iron Additives"

     ECS Solid State Letters, 4 (9), (2015) M19-M22. DOI: 10.1149/2.0031509ssl 

232) Ryosuke O. Suzuki, Takuya Uchiyama, Takafumi Wakamatsu, Fumiya Matsuura, 

     Mika Kitamura, Koya Otake, Shungo Natsui, Norihito Sakaguchi, Tatsuya Kikuchi,

     "CO2 Decomposition by ZrO2 Anode and Molten Salt Electrolysis in CaCl2-CaO or LiCl-Li2O,"

     Proc. 10th Intern. Conf on Molten Salt Chemistry and Technology (MS10) and 5th Asian Conf. on Molten Salt Chem. and Tech.(AMS5),

     10-14 June, 2015, Northeastern University, Shenyang, China, pp.218-223.

231) Ryosuke O. Suzuki,

     "Oxide reduction using electrolysis in CaCl2-CaO or LiCl-Li2O melt,"

     Proc. 10th Intern. Conf on Molten Salt Chemistry and Technology (MS10) and 5th Asian Conf. on Molten Salt Chem. and Tech.(AMS5),

     10-14 June, 2015, Northeastern University, Shenyang, China, pp.1-4. (Plenary Lecture).

230) Xiang-ning Meng, Ryosuke O. Suzuki,

     "Performance Analysis of Thermoelectric Modules Using Polyhedron Elements",

     Materials Transactions, 56 (7) (2015) 1092-1095. DOI: 10.2320/matertrans.E-M2015808 

229) Akimasa Takenaga, Tatsuya Kikuchi, Shungo Natsui, and Ryosuke O. Suzuki

     "Self-Ordered Aluminum Anodizing in Phosphonoacetic Acid and Its Structural Coloration",

     ECS Solid State Letters, 4(8) (2015) P55-P58. doi: 10.1149/2.0021508ssl 

228) Tatsuya Kikuchi, Daiki Nakajima, Osamu Nishinaga, Shungo Natsui, Ryosuke O. Suzuki,

     "Porous anodic oxide films on aluminum and their nanofabrication",

     Journal of Japan Institute of Light Metals,  64 [10] (2014) pp. 476-482. DOI: 10.2464/jilm.64.476

227) Ryoji Funahashi, Yoko Matsumura, Tristan Barbier, Tomonari Takeuchi, Ryosuke O. Suzuki, 

     Shigeru Katsuyama, Atsushi Yamamoto, Hiroyuki Takazawa, Emmanuel Combe,

     "Durability of silicide-based thermoelectric modules at high temperatures in air",

     J. Electronic Materials, 44 (8) (2015) 2946-2952. DOI: 10.1007/s11664-015-3784-7

226) Ryoji Funahashi, Chunlei Wan, Feng Dang, Hiroaki Anno, Ryosuke O. Suzuki, Takeyuki Fujisaka, Kunihito Koumoto,

     "Advanced Materials for Clean Energy", Chapter 4.,

     "Development of Thermoelectric Technology from Materials to Generators",

     Edited by Qiang Xu Kyo Jo and Tetsuhiko Kobayashi,

     CRC Press (2015) pp.83-142, Print ISBN: 978-1-4822-0578-7, eBook ISBN: 978-1-4822-0580-0, DOI: 10.1201/b18287-5

225) Tatsuya Kikuchi, Osamu Nishinaga, Shungo Natsui, Ryosuke O. Suzuki

     "Polymer nanoimprinting using an anodized aluminum mold for structural coloration"

     Applied Surface Science, 341,(2015) pp.19-27 DOI: 10.1016/j.apsusc.2015.03.007  

224) Daiki Nakajima, Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki,

     "Highly Ordered Anodic Alumina Nanofibers Fabricated via Two Distinct Anodizing Processes",

     ECS Electrochem. Lett., 4(5) (2015) pp.H14-H17. DOI: 10.1149/2.0021505eel 

223) Fumiya Matsuura, Takafumi Wakamatsu, Shungo Natsui, Tatsuya Kikuchi, Ryosuke O. Suzuki

     "CO Gas Production by Molten Salt Electrolysis from CO2 Gas",

     ISIJ International, 55 (2) (2015) pp.404-408. DOI: 10.2355/isijinternational.55.404 

222) Shungo Natsui, Tatsuya Kikuchi, Ryosuke O. Suzuki,Tatsuya Kon, Shigeru Ueda, and Hiroshi Nogami,

     "Characterization of Liquid Trickle Flow in Poor-wetting Packed Bed",

     ISIJ International, 55 (6) (2015) pp.1259–1266. DOI: 10.2355/isijinternational.55.1259

221) Tatsuya Kikuchi, Osamu Nishinaga, Shungo Natsui, Ryosuke O. Suzuki

     "Fabrication of Self-Ordered Porous Alumina via Etidronic Acid Anodizing and Structural Color Generation from Submicrometer-Scale Dimple Array"

     Electrochimica Acta, 156 (2015) 235-243. DOI: 10.1016/j.electacta.2014.12.171 

220) Tatsuya Kikuchi, Daiki Nakajima, Osamu Nishinaga, Shungo Natsui, Ryosuke O. Suzuki,

     "Porous Aluminum Oxide Formed by Anodizing in Various Electrolyte Species",

     Current Nanoscience (2015) 11(5) pp.560-571. DOI:10.2174/1573413711999150608144742 

219) Masahiko Baba, Tatsuya Kikuchi, Ryosuke O. Suzuki

     "Niobium Powder Synthesized by Calciothermic Reduction of Niobium Hydroxide for Use in Capacitors",

     Journal of Physics and Chemistry of Solids, 78 (2015) 101-109. DOI: 10.1016/j.jpcs.2014.11.014  KURENAI repository

218) Tatsuya Kikuchi, Osamu Nishinaga, Daiki Nakajima, Jun Kawashima, Shungo Natsui, Norihito Sakaguchi, Ryosuke O. Suzuki,

     "Ultra-High Density Single Nanometer-Scale Anodic Alumina Nanofibers Fabricated by Pyrophosphoric Acid Anodizing",

     Scientific Reports, 4, No.7411,(2014) pp.1-6. DOI: 10.1038/srep07411 

217) Takafumi Wakamatsu, Takuya Uchiyama, Shungo Natsui, Tatsuya Kikuchi and Ryosuke O. Suzuki,

     "Solubilitiy of Gaseous Carbon Dioxide in Molten LiCl-Li2O",

     Fluid Phase Equilibria, 385 (2015) pp.48-53. DOI: 10.1016/j.fluid.2014.10.046 

216) Xiangning Meng and Ryosuke O. Suzuki,

     "Simulation Analysis of Tilted Polyhedron-Shaped Thermoelectric Elements",

     J. Electr. Mater., 44 [6](2015) pp.1469-1476. DOI: 10.1007/s11664-014-3418-5

215) Daiki Nakajima, Tatsuya Kikuchi, Shungo Natsui, and Ryosuke O. Suzuki

     "Growth behavior of anodic oxide formed by aluminum anodizing in glutaric and its derivative acid electrolytes",

     Applied Surface Science, 321 (2014) pp.364-370. DOI: 10.1016/j.apsusc.2014.10.014 

214) Shungo Natsui, Hifumi Takai, Takehiko Kumagai, Tatsuya Kikuchi, Ryosuke O. Suzuki,

     "Multiphase Particle Simulation of Gas Bubble Passing through Liquid/Liquid Interfaces",

     Materials Transactions, 55 (11)(2014) pp.1707-1715. Mater Trans Online DOI:10.2320/matertrans.M2014245 

     Japn Institute of Metals gave us the best paper award of 2014. 

213) Ryosuke O. Suzuki, Takeyuki Fujisaka, Keita O. Ito, Xiangning Meng and Hong-Tao Sui

      "Dimensional Analysis of Thermoelectric Modules under a Constant Heat Flux",

     J. Electr. Mater., 44 (1) (2015) pp.348-355. DOI:10.1007/s11664-014-3314-z 

212) Shungo Natsui, Tatsuya Kikuchi, and Ryosuke O. Suzuki,

     "Numerical Analysis of Carbon Monoxide-Hydrogen Gas Reduction of Iron Ore in a Packed Bed by an Euler-Lagrange Approach",

     Metallurgical and Materials Transactions B, 45 (6) (2014) pp.2395-2413. DOI:10.1007/s11663-014-0132-x

211) Tatsuya Kikuchi, Osamu Nishinaga, Shungo Natsui, and Ryosuke O. Suzuki,

     "Self-Ordering Behavior of Anodic Porous Alumina via Selenic Acid Anodizing",

     Electrochimica Acta, 137 (2014) 728-735. DOI:10.1016/j.electacta.2014.06.078 

210) Ryosuke O. Suzuki, Daisuke Yamada, Shogo Osaki, Reyna F. Descallar-Arriesgado, and Tatsuya Kikuchi,

     "Ionic Conduction of Oxygen and Calciothermic Reduction in Molten CaO-CaCl2",

     in "Molten Salts Chemistry and Technology", ed. by Marcelle Gaune-Escard, Geir Martin Haarberg,

     John Wiley & Sons, Chichester, West Sussex, UK, ISBN: 978-1-118-44873-1 (2014) pp.115-122. 

     Molten Salts Chemistry and Technology DOI:10.1002/9781118448847.ch2a

209) Tatsuya Kikuchi, Daiki Nakajima, Jun Kawashima, Shungo Natsui, and Ryosuke O. Suzuki,

     "Fabrication of anodic porous alumina via anodizing in cyclic oxocarbon acids",

     Applied Surface Science, 313 (2014) 276-285. DOI:10.1016/j.apsusc.2014.05.204

208) Keita O. Ito, Hongtao Sui, Hidetoshi Hakozaki, Hiroshi Kinoshita and Ryosuke O. Suzuki,

     "Using a Water Lens for Light Concentration in Thermoelectric Generation",

     J. Electr. Mater., 43 [6] (2014) 2086-2093. DOI:10.1007/s11664-013-2965-5 

207) Ryoji Funahashi, Yoko Matsumura, Tomonari Takeuchi, Hideaki Tanaka, Wataru Norimatsu, 

     Emmanuel Combe, Ryosuke O. Suzuki, Chunlei Wan, Yifeng Wang, Michiko Kusunoki and Kunihito Koumoto,

     "New n-type Silicide Thermoelectric Material with High Oxidation Resistance",

     Mater. Res. Soc. Symp. Proc. 1490 [1] (2013) 103-112.

     - Symposium B - Thermoelectric Materials Research and Device Development for Power Conversion 

     and Refrigeration. DOI:10.1557/opl.2013.117

206) Tatsuya Kikuchi, Osamu Nishinaga, Shungo Natsui, Ryosuke O. Suzuki,

     "Fabrication of Anodic Nanoporous Alumina via Acetylenedicarboxylic Acid Anodizing",

     ECS Electrochemistry Letters,3 [7] (2014) C25-C28. DOI:10.1149/2.0071407eel 

205) Tatsuya Kikuchi, Masumi Yoshida, Shiki Matsuura, Shungo Natsui, Etsuji Tsuji, Hiroki Habazaki, Ryosuke O. Suzuki,

     "Rapid reduction of titanium dioxide nano-particles by reduction with a calcium reductant",

     Journal of Physics and Chemistry of Solids, 75 [9] (2014) 1041-48. DOI:10.1016/j.jpcs.2014.04.016 

204) Xiangning Meng, Takeyuki Fujisaka, Keita O. Ito, and Ryosuke O. Suzuki,

     "Simulation of a thermoelectric module having parallelogram elements"

     Materials Transaction, 55 (8) (2014) 1219-1225. Mater Trans Online DOI:10.2320/matertrans.E-M2014822 

203) Keita O. Ito, Hongtao Sui, Hidetoshi Hakozaki, Hiroshi Kinoshita and Ryosuke O. Suzuki,

     "Light-Concentration Characteristic of Water Lens and its Application to Thermoelectric Generation"

     Key Engineering Materials, 617 (2014) 247-250. DOI:10.4028/www.scientific.net/KEM.617.247

202) Ryosuke O. Suzuki and Takeyuki Fujisaka,

     "Optimization of Module Shape in Thermoelectric Power Generation"

     Key Engineering Materials, 617 (2014) 251-255. DOI:10.4028/www.scientific.net/KEM.617.251

201) Xiangning Meng, Takeyuki Fujisaka, Keita O. Ito, and Ryosuke O. Suzuki,

     "Thermoelectric Analysis for a Three-Dimensional Power Generator in Helical"

     Key Engineering Materials, 617 (2014) 260-264. DOI:10.4028/www.scientific.net/KEM.617.260

200) Xiangning Meng, Takeyuki Fujisaka, Keita O. Ito and Ryosuke O. Suzuki

     "Thermoelectric Analysis for Pai-type Thermoelectric Module with Tilted Elements",

     Materials Research Innovations, 18, Suppl.4 (2014) S4-116-121. DOI:10.1179/1432891714Z.000000000654

199) Shungo Natsui, Hifumi Takai, Takehiko Kumagai, Tatsuya Kikuchi, Ryosuke O Suzuki,

     "Stable Mesh-free Moving Particle Semi-implicit Method for Direct Analysis of Gas-Liquid Two-Phase Flow",

     Chemical Engineering Science, Vol. 111, (2014) 286-298. DOI:10.1016/j.ces.2014.02.038

198) Tatsuya Kikuchi, Tsuyoshi Yamamoto, Shungo Natsui, Ryosuke O. Suzuki,

     "Fabrication of Anodic Porous Alumina by Squaric Acid Anodizing",

     Electrochimica Acta, 123 (2014) 14-22. DOI:10.1016/j.electacta.2013.12.186 

197) Xiangning Meng, Takeyuki Fujisaka and Ryosuke O. Suzuki

     "Thermoelectric Analysis for Helical Power Generation Systems"

     J. Electron. Mater., 43 [6] (2014) 1509-1520. DOI:10.1007/s11664-013-2768-8 

196) Tatsuya Kikuchi, Masumi Yoshida, Yoshiaki Taguchi, Hiroki Habazaki and Ryosuke O. Suzuki,

     "Fabrication of a Macro-Prorous Ti-Zr Alloy by Electroless Reduction with a Calcium Reductant for Electrolytic Capacitor Applications,"

     J. Alloys and Compounds, 586 (2014) 148-154. DOI:10.1016/j.jallcom.2013.10.052

195) Osamu Nishinaga, Tatsuya Kikuchi, Shungo Natsui, and Ryosuke O. Suzuki

     "Rapid fabrication of self-ordered porous alumina with 10-/sub-10-nm-scale

     nanostructures by selenic acid anodizing",

     Scientific Reports, 3, (2013)2748. DOI:10.1038/srep02748 

194) Tatsuya Kikuchi, Tsuyoshi Yamamoto, Ryosuke O. Suzuki

     "Growth behavior of anodic porous alumina formed in malic acid solution",

     Applied Surface Science, 284 (2013) 907-913. DOI:10.1016/j.apsusc.2013.08.044

193) Tatsuya Kikuchi, Yuhta Wachi, Masatoshi Sakairi, and Ryosuke O. Suzuki

     "Aluminum Bulk Micromachining through an Anodic Oxide Mask by 

     Electrochemical Etching in an Acetic Acid / Perchloric Acid Solution"

     Microelectronic Engineering, 111 (2013) 14-20. DOI:10.1016/j.mee.2013.05.007 

192) Xiang-ning Meng, Wei-ling Wang, Miao-yong Zhu, Ryosuke O. Suzuki,

     "Deformation simulation of copper plates of slab continuos casting mold",

     Proc. 4th International Symposium on High-Temperature Metallurgical Processing,

     Edited by: Tao Jiang, Jiann-YangHwang, Phillip J. Mackey, Onuralp Yucel, and Guifeng Zhou,

     TMS (The Minerals, Metals & Materials Society), (2013) 411-416.

191) Tatsuya Kikuchi, Yuhta Wachi, Taka-aki Takahashi, Masatoshi Sakairi, and Ryosuke O. Suzuki

     "Fabrication of a Meniscus Microlens Array Made of Anodic Alumina by Laser Irradiation and Electrochemical Techniques"

      Electrochimica Acta, 94 (2013) 269-276. DOI:10.1016/j.electacta.2013.02.020 

190) Koya Otake, Hiroshi Kinoshita, Tatsuya Kikuchi, and Ryosuke O. Suzuki

     "CO2 Gas Decomposition to Carbon by Electro-reduction in Molten Salts",

     Electrochimica Acta, 100 (2013) 293-299. DOI:10.1016/j.electacta.2013.02.076 

189) Ryosuke O. Suzuki, Atsushi Nakagawa, Hongtao Sui, and Takeyuki Fujisaka

     "Thermoelectric Generation Using Water Lenses",

     J. Electron. Mater., 42 (7) (2013) 1960-1965. DOI:10.1007/s11664-013-2483-5 

188) Takeyuki Fujisaka Hongtao Sui, and Ryosuke O. Suzuki,

     "Design and Numerical Evaluation of Cascade-Type Thermoelectric Modules",

     J. Electron. Mater., 42 (7) (2013) 1688-1696. DOI:10.1007/s11664-012-2400-3 

187) Isamu Ueda, Masahiko Baba, Tatsuya Kikuchi, and Ryosuke O. Suzuki,

     "Formation of Niobium Powder by Electrolysis in Molten Salt",

     Electrochimica Acta, 100 (2013) 269-274. DOI:10.1016/j.electacta.2013.01.054 

186) R. Funahashi, Y. Matsumura, H. Tanaka, T. Takeuchi, W. Norimatsu, E. Combe, 

     R. O. Suzuki, Y. Wang, C. Wan, S. Katsuyama, M. Kusunoki, K. Koumoto, 

     "Thermoelectric properties of n-type Mn3-xCrxSi4Al2 in air",

     J. of Applied Phys., Vol. 112, No. 7, (2012) 073713. DOI*10.1063/1.4755793

185) Ryunosuke Enmei, Tatsuya Kikuchi and Ryosuke O. Suzuki,

     "Production of Nb-Ti-Ni alloy in molten CaCl2",

     Electrochimica Acta, 100 (2013) 257-260. DOI:10.1016/j.electacta.2012.11.044

184) Ryosuke O. Suzuki, Yuto Sasaki, Takeyuki Fujisaka and Min Chen,

     "Power generation using the fluids blown perpendicular to the TE panel",

     IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society. 

     25-28 Oct., 2012, Ecole de Technologie Superieure de Montreal, Universite du Quebec, Montreal, Canada,

     The Institute of Electrical and Electronics Engineers (IEEE), 

     445 Hoes Lane, Piscataway, NJ 08854 USA, (2012) 5873-78. DOI:10.1109/IECON.2012.6389123

183) Takeyuki Fujisaka and Ryosuke O. Suzuki

     "Dimensional Optimization of Thermoelectric Modules for Solar Power Generation",

     IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society. 

     25-28 Oct., 2012, Ecole de Technologie Superieure de Montreal, Universite du Quebec, Montreal, Canada,

     The Institute of Electrical and Electronics Engineers (IEEE), 

     445 Hoes Lane, Piscataway, NJ 08854 USA, (2012) 5868-72. DOI:10.1109/IECON.2012.6389124

182) Ryosuke O. Suzuki and Takeyuki Fujisaka,

     "Optimization of Design in Cascade-Type Thermoelectric Module",

     Proc. Powder Metallurgy World Congress and Exhibition (PM2012 YOKOHAMA). 

     Sept.23-27, 2012, Pacifico Yokohama, Yokohama, Japan,

     the Japan Society of Powder and Powder Metallurgy (JSPM), (2012) 16E-S1-17.

     "0463_201211060004.pdf" in CDROM (ISBN:978-4-9900214-9-8). 

181) Ryosuke O. Suzuki, Isamu Ueda, Tatsuya Sato, Masahiko Baba and Tatsuya Kikuchi,

     "Reduction of Niobium Oxide Using CaCl2 Melt",

     Proc. 4th Asian Conference on Molten Salt Chemistry and Technology. 

     Sept.23-27, 2012, Hotel Taikanso, Matsushima, Japan,

     Molten Salt Committee, the Electrochemical Society of Japan. (2012) pp.29-35.> 

180) Ryosuke O. Suzuki, Koya Otake, Tetsuya Uchiyama, Hiroshi Kinoshita, Norihito Sakaguchi, Tatsuya Kikuchi,

     "Decomposition of CO2 Gas in CaCl2-CaO and LiCl-Li2O Molten Salts",

     ECS Transactions, 50 (11) (2012) 443-450. DOI:10.1149/05011.0443ecst

179) Ryosuke O. Suzuki, Naoto Kobayashi, Kei-ichi Kobayashi, Daisuke Yamada, Shogo Osaki, 

     Reyna Famila Descaller-Arriesgado, and Tatsuya Kikuchi,

     "Electrolysis of CaO in the Molten CaCl2 for Direct Reduction of TiO2",

     Proc. 12th World Conf. on Titanium, June 19-24, 2011, China National Convention Center, Beijing, China

     ed by Lian Zhou, Hui Chang, Yafeng Lu and Dongsheng Xu,

     Science Press, Beijing, China, (2011) vol.I, pp.116-120.

178) Naoto Kobayashi, Kei-ichi Kobayashi, Tatsuya Kikuchi and Ryosuke O. Suzuki,

     "Reduction of Titanium Oxides in Molten CaO-CaCl2"

     Proc. 12th World Conf. on Titanium, June 19-24, 2011, China National Convention Center, Beijing, China

     ed by Lian Zhou, Hui Chang, Yafeng Lu and Dongsheng Xu,

     Science Press, Beijing, China, (2011) vol.I, pp.84-86.

177) Koya Otake, Hiroshi Kinoshita, Tatsuya Kikuchi, Ryosuke O. Suzuki

     "CO2 Decomposition Using Electrochemical Process in Molten Salts",

     Journal of Physics: Conference Series, 379 (1) (2012) 012038. DOI:10.1088/1742-6596/379/1/012038  

176) Ryosuke O. Suzuki, Yuto Sasaki, Takeyuki Fujisaka and Min Chen

     "Effects of Fluid Directions on Heat Exchange in Thermoelectric Generators",

     J. Electron. Mater., 41 (6) (2012) 1766-1770. DOI:10.1007/s11664-012-2074-x 

175) Reyna Famila Descallar-Arriesgado, Naoto Kobayashi, Tatsuya Kikuchi and R.O.Suzuki

     "Calciothermic Reduction of NiO by Molten Salt Electrolysis of CaO in CaCl2 Melt"

     Electrochemica Acta, 56 (24) (2011), pp.8422-8429. DOI:10.1016/j.electacta.2011.07.027 

174) J.Zhu, J.Gao, M.Chen, J.Zhang, Q.Du, L.A.Rosendahl and R.O.Suzuki

     "Experimental Study of a Thermoelectric Generation System",

     J. Electron. Mater., 40, No.5 (2011) pp.744-752. DOI:10.1007/s11664-011-1536-x

173) Yoshiaki Kashiwaya, Yasuaki Kusada, R.O. Suzuki

     "Effect of Sulfur on the TTT Diagram of CaO-Al2O3 Slag at Eutectic Composition",

     ISIJ international,  Vol.51, No.12 (2011) pp.1974-1981. DOI:10.2355/isijinternational.51.1974 

172) Y. Kashiwaya, Y. Kusada, R.O. Suzuki

     "Atmosphere Controlled Hot Thermocouple Method and Crystallization Phenomenon of CaO-Al2O3 Eutectic Slag",

     ISIJ international, (2011) No.12 (2011) pp.1967-1973. DOI:10.2355/isijinternational.51.1967 

171) M. Chen, Y. Sasaki and R.O. Suzuki,

     "Computational Simulation of Thermoelectric Generators in Marine Power Plants",

     Materials Transactions, 52, No.8 (2011) pp.1549-1552. DOI:10.2320/matertrans.E-M2011813 

      Thermoelectric Society of Japn gave us the best paper award.

170) S. Osaki, H. Sakai and R.O. Suzuki,

     "Direct Production of Ti-29Nb-13Ta-4.6Zr Biomedical Alloy from Oxide Mixture in Molten CaCl2",

     J. Electrochemical Society, 157, No.8 (2010) pp.E117-E121. DOI:10.1149/1.3435302

169) R.O.Suzuki,

     "Multi-Layered Thermoelectric Power Generator",

     Proceedings of CIMTEC 2010 - 5th Forum on New Materials, PART C, ed. by Pietro VINCENZINI, Kunihito KOUMOTO, Nicola ROMEO and Mark MEHOS

     Advances in Science and Technology, Vol. 74 (2010) pp 1-8. DOI:10.4028/www.scientific.net/AST.74.1

168) R.O.Suzuki,

     "Current Activities of OS Process Using Molten CaO+CaCl2",

     Proceedings of 2nd International Round Table on Titanium Production in Molten Salts,

     Tromso-Trondheim, Norway, 19-22 September 2010, "Suzuki-paper.pdf". Proc. available as pdf file.

167) R.O.Suzuki,

     "Reduction of Oxides Using CaO Electrolysis in Molten Calcium Chloride",

     Yohyuhen Oyobi Kouon Kagaku(Molten Salts), 53[1](2010) pp.5-11.. 

166) S. Osaki, H.Sakai and R.O.Suzuki

     "Direct Production of Ti-29Nb-13Ta-4.6Zr Biomedical Alloy from Oxide Mixture in Molten CaCl2",

     Proc.Processing and Fabrication of Advanced Materials XVIII, (Dec.12-14, 2009, Sendai, Japan)

     Ed. by M.Niinomii, M.Morinaga, M.Nakai, N.Bhatnagar and T.S.Srivatsan,

     176th Committee on Process Created Materials Function, Japan Society for the Promotion of Science, Japan,

     Tohoku University, Sendai, Japan, vol.2, pp.815-824.  

165) R.O.Suzuki,

     "Direct Metal Production from Oxides by Using Molten Salt Electrolysis of CaO in CaCl2",

     Proc.Processing and Fabrication of Advanced Materials XVIII, (Dec.12-14, 2009, Sendai, Japan),

     Ed. by M.Niinomii, M.Morinaga, M.Nakai, N.Bhatnagar and T.S.Srivatsan,

     176th Committee on Process Created Materials Function, Japan Society for the Promotion of Science, Japan,

     Tohoku University, Sendai, Japan, vol.2, pp.701-710. 

164) K.Kobayashi, Y.Oka and R.O.Suzuki,

     Influence of Current Density to Direct Reduction of TiO2 in Molten CaCl2,

     Materials Transactions, Vol.50 [12] (2009) pp.2704-2708. DOI:10.2320/matertrans.MA200910 Mater Trans Online,  

     (Original English Translation of List No.152.)

163) R.O.Suzuki and H.Kozasa,

     "Thermoelectric Properties of Zr3Mn4Si6 and TiMnSi2",

     Journal of Electronic Materials, 39, (9)(2010), 2017-2022. DOI:10.1007/s11664-009-1019-5 

162) R.O.Suzuki, Y. Oka, K. Kobayashi, H. Sakai,

     "Calciothermic Reduction and Simultaneous Electrolysis of CaO in the Molten CaCl2",

     Proc.Processing Materials for Properties III,

     Ed. by B. Mishra, A. Fuwa, and P. Bhandhubanyong, ISBN:978-0-87339-727-8,

     TMS (The Minerals, Metals & Materials Society, USA), 2009, 387-392.

161) R.O.Suzuki,

     "Current and Developing Methods for Titanium Production",

     Supervised by M.Niinomi, "Basic Materials Science, Manufacturing and Newly Advanced Technologies

     of Titanium and Its Alloys", CMC books, Tokyo (2009) pp.26-39. 

160) K.Kobayashi, R.O.Suzuki and T. Naito,

     "Current Density in OS Process for TiO2 Reduction",

     Proc. 2008 Joint Symp. on Molten Salts, (Oct.19-23, 2008, Kobe, Japan)

     Ed. by S.Deki, K.Ota, Y.Iwadate and M. Matsunaga,

     The Electrochemical Society of Japan (Tokyo), 2008, 742-747.

159) R.O.Suzuki and T. Naito,

     "Calciothermic Reduction of TiCl4 Gas by Electrolysis in CaCl2 Melt",

     Proc. 2008 Joint Symp. on Molten Salts, (Oct.19-23, 2008, Kobe, Japan)

     Ed. by S.Deki, K.Ota, Y.Iwadate and M. Matsunaga,

     The Electrochemical Society of Japan (Tokyo), 2008, 658-663.

158) Y.Oka and R.O.Suzuki,

     "Direct Reduction of Liquid V2O5 in Molten CaCl2",

     Proc. 2008 Joint Symp. on Molten Salts, (Oct.19-23, 2008, Kobe, Japan)

     Ed. by S.Deki, K.Ota, Y.Iwadate and M. Matsunaga,

     The Electrochemical Society of Japan (Tokyo), 2008, 652-657.

157) H.Sakai, Y.Oka and R.O.Suzuki,

     "Synthesis of Ti-6Al-4V Alloy Powder by the Electrolysis of Molten CaCl2+CaO",

     Proc. 2008 Joint Symp. on Molten Salts, (Oct.19-23, 2008, Kobe, Japan)

     Ed. by S.Deki, K.Ota, Y.Iwadate and M. Matsunaga,

     The Electrochemical Society of Japan (Tokyo), 2008, 354-359.

156) J. Hashizume, Y.Oka and R.O.Suzuki,

     "Solubility of CO2 Gas in the Molten XaO-CaCl2",

     Proc. 2008 Joint Symp. on Molten Salts, (Oct.19-23, 2008, Kobe, Japan),

     Ed. by S.Deki, K.Ota, Y.Iwadate and M. Matsunaga,

     The Electrochemical Society of Japan (Tokyo), 2008, 128-133.

155) R.O.Suzuki and T. Naito,

     "Calciothermic Reduction of TiCl4 Gas during the Electrolysis of CaCl2 Melt",

     ECS Transactions, 16 [49] (2008) pp.265-270. DOI:10.1149/1.3159331 

154) Y. Oka, and R.O.Suzuki,

     "Direct Reduction of Liquid V2O5 in Molten CaCl2",

     ECS Transactions, 16 [49] (2008) pp.255-264. DOI:10.1149/1.3159330 

153) H.Sakai, Y.Oka and R.O.Suzuki,

     "Synthesis of Ti-6Al-4V Alloy by the Elctrolysis of Molten CaCl2+CaO,"

     J. Jpn. Inst. Metals, Vol.72 [12] (2008) pp.921-927. DOI:10.2320/jinstmet.72.921 JIM 

152) K.Kobayashi, R.O.Suzuki and T. Naito,

     "Influence of Current Density to Direct Reduction of TiO2 in Molten CaCl2,"

     J. Jpn. Inst. Metals, Vol.72 [12] (2008) pp.916-920. DOI:10.2320/jinstmet.72.916 JIM 

151) R. O. Suzuki,

     "Thermoelectric Power Generation Using Two Thermal Fluids",

     Proc. 8th Australian Heat and Mass Transfer Conference (8AHMTC),

     (26-29 July 2005, Curtin Univ. of Tech., Perth, Australia)

     Ed. by T.T.Chandratilleke and R. Narayanaswamy, Begell House Inc. Publishers,

     ISBN 1-56700-235-8 (2007) K04.pdf

150) S-I.Toda, R. O. Suzuki, S.Yoshikawa,

     "Applicability to Nuclear Plants for Better Safety",

     Ed.by T. Kajiwaka, "Handbook of Thermoelectric Conversion Technology",

     NTS, Tokyo (2008) pp.571-578. 

149) R.O.Suzuki and D.Tanaka,

     "System Design of Power Generanation Using Fluids",

     Ed.by  T. Kajiwaka, "Handbook of Thermoelectric Conversion Technology",

     NTS, Tokyo (2008) pp.579-586. 

148) C. Lertsatitthanakorn, N. Khasee, S. Atthajariyakul, S. Soponronnarit, 

     A. Therdyothin, Ryosuke O. Suzuki,

     "Performance Analysis of a Double-pass Thermoelectric Solar Air Collector",

     Solar Energy Materials & Solar Cells, 92 (2008) pp.1105-1109. DOI:10.1016/j.solmat.2008.03.018

147) Masatomo Yashima and R.O.Suzuki,

     "Electronic structure and magnetic properties of monoclinic beta-Cu2V2O7: A GGA+U study",

     Physical Review B, 79, 1 (2009) pp.125201-1-125201-6. DOI:10.1103/PhysRevB.79.125201 

146) R. O. Suzuki and H. Ishikawa,

     "Direct Reduction of Vanadium Oxide in Molten CaCl2",

     Mineral Processing and Extractive Metallurgy (Trans. Inst. Min. Metall. C), 117 [2](2008) pp.108-112. DOI:10.1179/174328508X290894  

145) R.O.Suzuki

     "Calciothermic Reduction and Simultaneous Electrolysis of CaO in the Molten CaCl2

     - Some Modifications of OS Process"

     Proc. of 1st Intern. Round Table on Titanium Production in Molten Salts",

     Deutsches Zentrum fuer Luft- und Raumfahrt, Cologne, Germany, 

     2-4 Mar. (2008) pp.20-26. 

144) R.O.Suzuki,

     "Titanium and Energy",

     "Frontiers of Materials Science", Ohmsha, Tokyo (2007),

     ISBN 975-4-274-90639-8, pp.193-216.

143) Yuichi Oka and Ryosuke O.Suzuki,

     "Direct Reduction of Vanadium Oxide in the Molten Calcium",

     J.Japan Institute of Metals, Vol.72 [3] (2008) pp.181-187. DOI:10.2320/jinstmet.72.181 

142) -------

141) Yoshitatsu Kano and R.O.Suzuki,

     "Preparation of Hydrogen Storage Ti-V-Cr Alloy from the Oxide Mixture in CaCl2",

     Proceedings of 11th World Conference on Titanium (Ti-2007), (Kyoto, Japan, June 3-7, 2007),

     "Ti-2007 Science and Techology", ed. by M.Niinomi, S.Akiyama, M.Ikeda, M.Hagiwara and K.Maruyama,

     The Japan Institute of Metals (JIM), pp.107-110. "2007_Vol_1_Pres_19.pdf" at Online ITA

     also published in "Metallurgical Abstracts on Light Metals and Alloys" Vol.41. on Web 

     by The Light Metal Educational Foundation, inc.

140) R.O.Suzuki

     "Calciothermic Reduction of TiO2 with ZrO2 Anode in Molten CaCl2"

     Proceedings of 11th World Conference on Titanium (Ti-2007), (Kyoto, Japan, June 3-7, 2007)

     "Ti-2007 Science and Techology", ed. by M.Niinomi, S.Akiyama, M.Ikeda, M.Hagiwara and K.Maruyama,

     The Japan Institute of Metals (JIM), pp.99-102. "2007_Vol_1_Pres_17.pdf" at Online ITA

     also published in "Metallurgical Abstracts on Light Metals and Alloys" Vol.41. on Web 

     by The Light Metal Educational Foundation, inc.

139) Takayuki Naito, Ryosuke O.Suzuki and Yoichi Tomii

     "Reduction of TiCl4 gas by Ca dissolved in the molten CaCl2"

     Proceedings of 11th World Conference on Titanium (Ti-2007), (Kyoto, Japan, June 3-7, 2007)

     "Ti-2007 Science and Technology", ed. by M.Niinomi, S.Akiyama, M.Ikeda, M.Hagiwara and K.Maruyama,

     The Japan Institute of Metals (JIM), pp.103-106. "2007_Vol_1_Pres_18.pdf" at Online ITA

     partially published in "Metallurgical Abstracts on Light Metals and Alloys" Vol.41. on Web 

     by The Light Metal Educational Foundation, inc.

138) Kotaro Sotojima, R.O. Suzuki, K. Amezawa, Yoichi Tomii

     "Thermoelectric properties and phase transition of (ZnxCu2-x)V2O7"

     J. Jpn. Soc. Powder Powder Metallurgy, 54[5](2007) pp.356-361.(in Japanese) DOI:10.2497/jjspm.54.356

137) Kotaro Sotojima, R.O. Suzuki, K. Amezawa, Y. Tomii

     "Thermoelectric Properties and Phase Transition of (ZnxCu2-x)V2O7",

     Mater. Trans. 48 [8] (2007) pp.2094-2099. Mater Trans Online DOI:10.2320/matertrans.E-MRA2007856 

136) R. O. Suzuki and H. Ishikawa,

     "Direct Reduction of Vanadium Oxide in Molten CaCl2",

     ECS Transactions, Vol.3, No.35 (2007) pp.347-356. DOI:10.1149/1.2798678 

     Proc. 15th Intern. Symp. on Molten Salts, (Oct.29- Nov.3, 2006, Cancun, Mexico)

     The Electrochemical Society, Penningston, NJ, USA.

135) R. O. Suzuki

     "Direct Reduction Processes for Titanium Oxide in Molten Salt"

     JOM: The Member J. Minerals, Metals. Mater. Soc., 59 [1](2007) pp.68-71. DOI:10.1007/s11837-007-0014-7  

134) R. O. Suzuki and Hiroyuki Ishikawa,

     "Direct Reduction of Vanadium Oxide in Molten CaCl2",

     Proc. Sohn International Symposium, "Advanced Processing of Metals and Materials, Vol.3,

     Thermo and Physicochemical Principles: Special Materials and Aqueous and Electrochemical Processing",

     Ed. by F. Kongoli and R.G. Reddy, TMS (The Minerals, Metals & Materials Society), 2006, pp. 597-607.

     Proc. available

133) R. O. Suzuki and D. Tanaka,

     "Mathematical Simulation on Power Generation by Roll Cake Type of Thermoelectric Cylinders", 

     Proc. 25th Intern. Conf. on Thermoelectrics, (6-10 August 2006, Wien, Austria),

     The Inst. Elect. Elect. Eng.(IEEE) (2006) pp.305-310. Proc. available DOI:10.1109/ICT.2006.331375

132) R. O. Suzuki,

     "Calciothermic reduction in molten calcium chloride",

     Yohyuhen Oyobi Kouon Kagaku(Molten Salts and High Temperature Chemistry), 49[1](2006) pp.27-32. 

131) M. Yamaguchi, M. Yamaguchi, R. O. Suzuki,

     "State of Art 2005 Fall, New Refining Processes Current",

     Titanium Japan, 54[1](2006) pp.78-82. 

130) Tatsuya Maruoka and Ryosuke O. Suzuki,

     "The Phase Equilibria and Seebeck Coefficient of (Co,M)3AlC (M=Fe or Ni)",

     Mater.Trans, 47[6](2006) pp.1422-1427. DOI:10.2320/matertrans.47.1422 

129) R. O. Suzuki and Y. Maki,

     "Dissolution Rate of CaO in Molten CaCl2",

     Met.Mater.Trans, (2005) submitted.

128) R. O. Suzuki,

     "New Preparation Method for Hydrogen Storage Alloys",

     Chemistry Frontier Ser.17, "Frontier of New Development for Energy - 

     Aming at Structuring of Environmentally Friendly System for Energy, 

     Alternative with Fossil Fuel," ed. by S. Yoshikawa, Kagaku-Dohjin, Kyoto, Japan,

     ISBN4-7598-0747-0 C3043 (2006) pp.61-67.

127) R. O. Suzuki and K. Ohta,

     "Cromia Coating on Iron Using CrO3 in Ozone",

     Oxidation of Metals, Vol.65, No.1/2,(2006) pp.39-52. DOI:10.1007/s11085-006-9006-1.

126) R. O. Suzuki, M. Baba and K. Yamamoto,

     "Broccoli-like Powder of Ta and Nb by Ca Reduction of Their Oxides",

     Proc. 7th Int. Symp. on Molten Salts Chem. & Techn.,

     (29Aug.-02Sept. 2005, Toulouse, France), vol.2, pp.1063-66.

125) R. O. Suzuki, T. Ogawa and R. Kondo,

     "Synthesis of Higher Chromium Oxides Using Ozone Gas",

     J.Amer.Ceram.Soc., 91 [4] (2008) pp.1148-1154. DOI:10.1111/j.1551-2916.2005.00862.x

124) R. O. Suzuki and H. Kitagawa,

     "Direct Synthesis of TiCr2 Powder by Calciothermic Co-reduction of their Oxides in Molten CaCl2",

     Electrochemistry, 73 [8] (2005) pp.724-729 

123) R. O. Suzuki, S-I.Toda, S.Yoshikawa and K.Tamayama,

     "Thermoelectric Power Generation Using Hot Fluid Flow of Sodium",

     Proc. Joint Intern. Conf. on Sustainable Energy and Environment,

     (1-3 Dec., 2004, Hua Hin, Tailand), vol.1 (2004), pp.63-66. pdf file at our HP .

122) R. O. Suzuki and Y. Matsuoka,

     "Preparation of Ti-Cr-V Hydrogen Absorption Alloy Powder",

     Proc. Joint Intern. Conf. on Sustainable Energy and Environment,

     (1-3 Dec., 2004, Hua Hin, Tailand), vol.1 (2004), pp.167-170. pdf file at our HP  .

121) K. Yamamoto, R. O. Suzuki, Y. Ono and M. Baba,

     "Formation of Broccoli-like Morphology of Ta Powder",

     Proc. 14th Intern. Symp. on Molten Salts, (October 3-8, 2004, Hawaii, USA),

     The Electrochemical Society, Penningston, NJ, USA, (2006) pp.1052-1062.

     ECS Proc. 2004-24 Proceedings of the 14th International Symposium on Molten Salts, 1052-1062. DOI: 10.1149/200424.1052PV

120) N. Asahara, M. Yoshida, Y. Matsuoka and R. O. Suzuki,

     "Ceramic Membrane in Direct Reduction of TiO2 in Molten CaCl2",

     Proc. 14th Intern. Symp. on Molten Salts, (October 3-8, 2004, Hawaii, USA),

     The Electrochemical Society, Penningston, NJ, USA, (2006) pp.1063-1070.

     ECS Proc. 2004-24 Proceedings of the 14th International Symposium on Molten Salts, 1063-1070. DOI: 10.1149/200424.1063PV

119) R. O. Suzuki, K. Tatemoto and H. Kitagawa,

     "Preparation of Hydrogen Storage Alloys from the Oxides by Calcium Co-reduction in Molten CaCl2",

     Proc. 14th Intern. Symp. on Molten Salts, (October 3-8, 2004, Hawaii, USA),

     The Electrochemical Society, Penningston, NJ, USA, (2006) pp.1006-1016.

     ECS Proc. 2004-24 Proceedings of the 14th International Symposium on Molten Salts, 1063-1070. DOI: 10.1149/200424.1006PV

118) R. O. Suzuki,

     "Highly oxidation of the metals and semiconductors surfaces by gaseous ozoene",

     Oyo Buturi, 74[1](2005) pp.37-41. 

117) M. Baba and R. O. Suzuki,

     "Dielectric Properties of Tantalum Powder with Broccoli-like Morphology",

     J. Alloys and Comp., 392[1-2](2005) pp.225-230. 

116) R. O. Suzuki,

     "World-wide New Proposals Challenging for Titanium Preparation",

     Titanium Japan, 52[4](2004) pp.281-287. 

115) S-I.Toda, R. O. Suzuki, K.Kondo, S.Nakai, S.Yoshikawa and K.Tamayama,

     "Power Generation with Fe2VAl modules using Sodium Heat Source",

     Proc. 23rd Intern. Conf. on Thermoelectrics, (25-29 August 2004, Adelaide, Australia)

     The Inst. Elect. Elect. Eng.(IEEE) (2004) #042, pp.1-4.

114) R. O. Suzuki, D. Tanaka and S-I.Toda,

     "Simulation of Thermoelectric Power Generation with Cylindrical Multi-Tubes",

     Proc. 23rd Intern. Conf. on Thermoelectrics, (25-29 August 2004, Adelaide, Australia)

     The Inst. Elect. Elect. Eng.(IEEE) (2004) #006, pp.1-4.

113) R. O. Suzuki, M. Baba, Y. Ono and K. Yamamoto,

     "Formation of Broccoli-like Morphology of Tantalum Powder",

     J. Alloys and Comp., 389[1-2](2005) pp.310-316. 

112) R. O. Suzuki, K. Tatemoto and H. Kitagawa,

     "Direct Synthesis of the Hydrogen Storage V-Ti Alloy Powder from the Oxides by Calcium Co-reduction",

     J. Alloys and Comp., 385[1-2] (2004) pp.173-180. 

111) A. Saguchi, K. Asabe, T. Fukuda, W. Takahashi, R. O. Suzuki,

     "Recycling of Rare Earth Magnet Scraps; Carbon and Oxygen Removal from Nd Magnet Scraps",

     J. Alloys and Comp., 408-412, (2006), pp.1377-1381. 

110) R. O. Suzuki and T. Kyono,

     "Thermoelectric Properties of Fe2TiAl Heusler Alloys",

     J. Alloys and Comp., 377[1-2] (2004) pp.38-42. 

109) R. O. Suzuki and S. Fukui,

     "Reduction of TiO2 in the Molten CaCl2 by Ca Deposited during CaO Electrolysis",

     Mater. Trans., 45[5] (2004) pp.1665-1671. Mater Trans Online  

108) R. O. Suzuki,

     "Mathematic Simulation on Power Generation by Roll Cake Type of Thermoelectric Double Cylinders",

     J. Power Sources, 133[2] (2004) pp.277-285. 

107) R. O. Suzuki, D. Tanaka and S-I,Toda,

     "Mathematical Simulation of Thermoelectric Power Generation with the Multi-Flat-Panels",

     Proc. 22nd Intern. Conf. on Thermoelectrics,

     (17-21 August 2003, La Grande-Motte, France)

     The Inst. Elect. Elect. Eng.(IEEE) (2003) pp.550-553.

106) R. O. Suzuki and D. Tanaka,

     "Mathematic Simulation of Thermoelectric Power Generation by Roll Cake Type of Thermoelectric Tubes",

     J. Power Sources, 132[1-2] (2004) pp.266-274. 

105) R. O. Suzuki,

     "OS Process - Thermo-Electro-chemical Reduction of TiO2 in the Molten CaCl2",

     "Ti-2003 Science and Technology", Proc. 10th World Conf. on Titanium, (13-18 July 2003, Hamburg, Germany),

     Ed.by G.Luetjering and J.Albrecht, 2004, Wiley-VCH (Weinheim, Germany) Vol.1, pp.245-252.

104) K. Tatemoto, Y. Ono and R. O. Suzuki,

     "Silicide Coating on Refractory Metals in Molten Salt",

     J. Phys. Chem. Solids, Vol.66[2-4] (2005) pp.526-529. 

103) M. Baba, Y. Ono and R. O. Suzuki,

     "Tantalum and Niobium Powder Preparation from Their Oxides by Calciothermic Reduction in the Molten CaCl2",

     J. Phys. Chem. Solids, 66[2-4] (2005) pp.466-470. 

102) R. O. Suzuki,

     "Calciothermic Reduction of TiO2 and in-situ Electrolysis of CaO in the Molten CaCl2",

     J. Phys. Chem. Solids, 66[2-4] (2005) pp.461-465. 

101) R. O. Suzuki,

     "Development of New Refining Processes of Titanium",

     KINZOKU (Mater.Sci.Techn.), 73[5](2003), pp.413-416.

100) R. O. Suzuki and D. Tanaka,

     "Mathematic Simulation of Thermoelectric Power Generation with Cylindrical Multi-Tubes",

     J. Power Sources, 124 [1] (2003) pp 293-298. 

99)R. O. Suzuki,

    "Discovery of Huge thermoelectricity on Iron-besed Hausler Alloy", Full TEXT available

    TECJ News letter, 7 (1)(2003) pp.5-6. 

98) R. O. Suzuki,

    "Challenge to a New Refining Process from Titanium Oxide",

    "Titanium is now taking off from the cradle to the grwowing age",

    The Japan Titanium Society, Tokyo Japan, (2002) p.309. 

97) R. O. Suzuki

    "OS Process - Thermochemical Approach to Reduce Titanium Oxide in the molten CaCl2"

    Invited Lecture, Proc. Yazawa Intern. Symp. on Metallurgical and Materials Processing:

    Principles and Technologies, (2-6 March 2003, San Diego CA, USA)

    "Aqueous and Electrochemical Processing", Vol.3, 

    ed. by F. Kongoli, K. Itagaki, C.Yamauchi and H.Y.Sohn,

    The Minerals, Metals & Materials Society, Warrendale, PA, USA (2003) pp.187-199.

96) R. O. Suzuki and K. Ono

    "OS Process - A New calciothermic reduction of TiO2 in the molten CaCl2"

    Invited Lecture, Proc. 18th Annual Conf. & Exhibition. of Intern. Titanium Assoc.,

    (6-8 Oct 2002, Orlando FL, USA) The Intern. Titanium Assoc., Broomfield, CO, USA (2002) "Suzuki_Ono.pdf".

95) R. O. Suzuki and D. Tanaka,

    "Thermoelectric Power Generation with the multi-Panels",

    J. Power Sources, 122 [2] (2003) pp.201-209. 

94) R. O. Suzuki, K. Teranuma and K. Ono

    "Calciothermic Reduction of Titanium Oxide and in-situ Electrolysis in Molten CaCl2"

    Metall. Mater. Trans. B, 34B [3](2003) pp.287-295. 

93) T. Kyono, R. O. Suzuki and K. Ono,

    "Conversion of Unused Heat Energy to Electricity by Means of Thermoelectric Generation in Condenser"

    IEEE Transactions on Energy Conversion, 18 [2] (2003) pp.330-334.  KURENAI repository

92) R. O. Suzuki and K. Ono,

    "A New Concept of Sponge Titanium Production by Calciothermic Reduction

    of Titanium Oxide in the Molten CaCl2"

    Proc. 13th Intern. Symp. on Molten Salt, (12-17 May 2002, Philadelphia, USA),

    ed. by . C. Delong, R. W. Bradshaw, M. Matsunaga, G. R. Stafford, and P. C. Trulove,

    The Electrochemical Society, Penningston, NJ, USA (2003) pp.810-821.

91) R. O. Suzuki and S. Inoue,

    "Calciothermic Reduction of Titanium Oxide in Molten CaCl2",

    Metall. Mater. Trans. B, 34B [3](2003) pp.277-285.

90) R. O. Suzuki and K. Ono,

    "New Titanium Smelting Processes under Development",

    Titanium Japan, 50[2](2002) pp.105-108. 

89) R. O. Suzuki,

    "Deoxidation Technique of niobium",

    KINZOKU (Mater.Sci.Techn.), 72[3](2002) pp.227-231. 

88) K. Ono and R. O. Suzuki,

    "A New Concept of Sponge Titanium Production by Calciothermic Reduction",

    JOM: The Member J. Minerals, Metals. Mater. Soc., 54 [2](2002) pp.59-61.

87) K. Ono and R. O. Suzuki,

    "Titanium Production From Oxide Using Reducible Molten Salt",

    Materia Japan(Bull.Jpn Inst Metals), 41[1](2002) pp.28-31.  

86) R. O. Suzuki, M. Ishikawa and K. Ono,

    "NbSi2 Coating on Niobium Using Molten Salt",

    J. Alloys and Compounds, 336[1/2](2002) pp.280-285. 

85) R.O. Suzuki,

    "Use ozone in material processing",

    Ozonews in Japan, 40 (2001) pp.3-7. 

84) R.O. Suzuki, A. Saguchi, W. Takahashi, T. Yagura and K. Ono,

    "Recycling of Rare Earth Magnet Scraps: Part II, Oxygen Removal by Calcium",

    Mater. Trans., 42[12](2001) pp.2492-2498.  Mater. Trans. Online 

83) A. Saguchi, K. Asabe, W. Takahashi, R.O. Suzuki and K. Ono,

    "Recycling of Rare Earth Magnet Scraps: Part III, Carbon Removal under Vacuum Heating",

    Mater. Trans., 43[2](2002) pp.256-260.  Mater. Trans. Online 

82) K. Asabe, A. Saguchi, W. Takahashi, R.O. Suzuki and K. Ono,

    "Recycling of Rare Earth Magnet Scraps: Part I, Carbon Removal by High Temperature Oxidation",

    Mater. Trans., 42[12](2001) pp.2487-2491.  Mater. Trans. Online 

81) Y.Hanada, R. O. Suzuki and K. Ono,

    "Seebeck Coefficient of (Fe,V)3Al Alloys",

    J.Alloys and Compounds, 329 (1-2)(2001) pp.63-68. 

80) K. Ono and R. O. Suzuki,

    "A Process For Continuous Titanium Production From Titanium Oxide",

    Proc. of Emerging Technology for Metals Production, (11-15 Feb. 2001,

    New Orleans, USA), Ed. by P.R.Talor, (TMS, Ohio, USA) pp.79-88. 

79) T. Nishiyama, R. Ishii, R. O. Suzuki, K. Takayama and K. Ono,

    "Needle-like Powder Preparation of Ta and Nb in the Molten Salt",

    Proc. of 2000 Powder and Powder Metallurgy World Congress, (13-18 Nov. 2000,Kyoto, Japan), 

    Ed. by K.Kosuge and H.Nagai, pp.513-516.

78) T. Ohshima, R. O. Suzuki, T. Yagura and K. Ono,

    "Direct Powder Preparation of Nb-Ti Alloy from the Oxide Mixture",

    Proc. of 2000 Powder and Powder Metallurgy World Congress, (13-18 Nov. 2000,Kyoto, Japan), 

    Ed. by K.Kosuge and H.Nagai, (Jpn. Soc Powder and Powder Metallurgy, Tokyo, Japan) pp.532-535. 

77) R. O. Suzuki, M. Aizawa, T. Ohshima and K. Ono,

    "Titanium Powder Preparation by Mg Reduction of Titanium Chlorides in the Moleten Salt", (Full Text),

    Proc. of 6th Intern. Conf. on Molten Slags, Fluxes and Salts, (12-17 June 2000,

    Stockholm, Sweden and Helsinki, Finland), ed. by S. Seetharaman and D. Sichen, paper 200.

76) R. O. Suzuki, T. Nishibata, Y. Nagaso, K. Nakanishi, M. Ishikawa, K. Teranuma and K. Ono,

    "Electroless Coating of Fe3Si on Steels in the Moleten Salt", (Full Text),

    Proc. of 6th Intern. Conf. on Molten Slags, Fluxes and Salts, (12-17 June 2000,

    Stockholm, Sweden and Helsinki, Finland), ed. by S. Seetharaman and D. Sichen, paper 180.

75) R. O. Suzuki, T.N. Deura, M. Wakino, T. Matsunaga, R. Ishii and K. Ono,

    "Titanium Powder Preparation by Mg Reduction of Titanium Chlorides in the Moleten Salt", (Full Text),

    Proc. of 6th Intern. Conf. on Molten Slags, Fluxes and Salts, (12-17 June 2000,

    Stockholm, Sweden and Helsinki, Finland), ed. by S. Seetharaman and D. Sichen, paper 199.

74) R. O. Suzuki and K. Ono,

    "Enhanced Evaporation of Copper by NH3 Gas Blowing",

    Proc. of 10th International IUPAC Conf. on High Temperature Materials Chemistry (HTMC X),

    (10-14 April 2000, Juelich, Germany), Ed. by K.Hilpert, F.W.Froben and L.Singheiser,

    (Forschungszentrum Juelich, Germany), Vol.15, Part II, pp.491-494. 

73) R. O. Suzuki, M. Ishikawa and K. Ono,

    "MoSi2 Coating on Molybdenum Using Molten Salt",

    J. Alloys and Compounds, 306 [1/2](2000) pp.285-291. 

72) R. O. Suzuki, Y. Nagaso, K. Nakanishi, M. Ishikawa and K. Ono,

    "Growth of Fe3Si Layer Deposited from the Molten Salt",

    steel research, 71 (2000) pp.138-143.  

71) R. O. Suzuki, T. Nishibata, K. Nakanishi, M. Ishikawa and K. Ono,

    "Electroless Coating of Fe3Si on Steel in the Molten Salt",

    steel research, 71 (2000) pp.130-137.  

70) R. O. Suzuki, T. N. Deura, R. Ishii, T. Matsunaga, T. N. Harada, M. Wakino and K. Ono,

    "Titanium Powder Preparation from TiCl4 in the Molten Salt",

    Proc. of 2000 Powder and Powder Metallurgy World Congress, (13-18 Nov. 2000, Kyoto, Japan), 

    Ed. by K.Kosuge and H.Nagai, pp.401-404. 

69) T. Tsuji, R. O. Suzuki and K. Ono,

    "Thermoelectric Properties of Fe-Mn-Si Alloys and Compound Fe3Si doped with Mn and V",

    J.Jpn.Inst.Met., 63, [11] (1999) pp.1435-1442.  

68) R. O. Suzuki, M. Aizawa and K. Ono,

    "Calcium Deoxidation of Niobium and Titanium in Ca-saturated CaCl2 Molten Salt",

    J. Alloys and Compounds, Vol.288 (1999) pp.173-182. 

67) R. O. Suzuki, M. Aizawa and K. Ono,

    "Solid State Deoxidation of Niobium by Vacuum Deposited Titanium",

    J. Alloys and Compounds, Vol.284, No.1-2, (1999) pp.222-227. 

66) R. O. Suzuki, T. N. Harada, T. Matsunaga, T. N. Deura and K. Ono

    "Titanium Powder Preparation by Magnesiothermic Reduction of Ti2+ in the Molten Salt"

    Metall. Mater. Trans. B, 30B [6] (1999) pp.403-410.

65) K. Ono and R. O. Suzuki,

    "New Iron-Based Thermoelectric Junctions and Thermoelectric Generation Concept",

    (Full text of preprint with all figures)

    Proc. XVII International Conference of Thermoelectrics(ICT98), 

    The Inst. Elect. Elect. Eng.(IEEE) (1998) pp.515-518. 

64) K. Ono and R. O. Suzuki,

    "Evaporation Process in Vacuum metallurgy",

    J.Mass Spectrom. Soc. Jpn. 47[1] (1999) pp.38-41. 

63) R. O. Suzuki, T. Ogawa and K. Ono,

    "Use Ozone to Prepare Silver Oxides",

    J.Amer.Ceram.Soc., 82 [8] (1999) p.2033-38. 

62) T. N. Deura, M. Wakino, T. Matsunaga, R. O. Suzuki and K. Ono,

    "Titanium Powder Production by TiCl4 Gas Injection into Magnesium through Molten Salts",

    Metall. Mater. Trans. B, 29B [12] (1998) pp.1167-74. 

61) K. Ono, M. Kado and R. O. Suzuki,

    "Thermoelectric properties of the Fe-Al and Fe-Al-Si alloys,

    for thermoelectric generation utilizing low-temperature heat sources"  

    steel research, 69 [9/98] (1998) pp.387-390.

60) T. N. Deura, T. Matsunaga, R. O. Suzuki and K. Ono,

    "Production of Titanium Powder by Reduction of Titanium Chloride in Molten Salt",

    Yohyuhen Oyobi Kouon Kagaku(Molten Salts and High Temperature Chemistry), 41 [1] (1998) pp.7-16.

59) Shengfeng Liu, R.O.Suzuki and K.Ono,

    "Solid State Deoxidation of Niobium by Calcium and Magnesium",

    J. Alloys and Compounds, 266 No.1-2 (1998) pp.247-254. 

58) M.Shoda, M. Kado, T. Tsuji, R. O. Suzuki and K. Ono

    "Seebeck effect of Fe-Al-Si alloy and low temperature thermoelectric properties"

    Tetsu-To-Hagane, 84 [2] (1998) pp.154-158.  

57) R. O. Suzuki, J. Nagata, and D. Risold

    "Experimental Phase Equilibria in the PbOx-CaO System"

    J. Amer. Ceram. Soc., 81[9](1998) pp.2493-96. 

56) D. Risold, J. Nagata, and R. O. Suzuki

    "Thermodynamic description of the Pb-O System"

    J. Phase Equilibria, 19 [3] (1998) pp.213-233.

55) K.Ono, R.O.Suzuki, R.Nakahashi and M.Shouda

    "Iron-Based Element for Low Temperature Thermoelectric Generator"

    Tetsu-To-Hagane, 83 [2] (1997) pp.157-161.  

54) H.Nishiura, R.O.Suzuki, K.Ono and L.J.Gauckler,

    "Experimental Phase Diagram in the Ag-Cu2O-CuO System",

    J. Amer. Ceram. Soc., 81 [8] (1998) 2181-87. 

53) K.Ono and R.O.Suzuki,

    "Thermoelectric Power Generation: Converting Low-Grade Heat into Electricity",

    Journal of Metals, Dec. (1998) pp.49-51.

52) R.O.Suzuki, T.Ogawa, D.Risold, L.J.Gauckler and K.Ono,

    "Experimental Phase Equilibria in the Sr-Ca-Cu-O System under the reduced oxygen atmosphere",

    (Full text and All figures),

    Netsu-Sokutei (J.Jpn.Soc. Calorimetry and Thenmal Analysis) 24 [2] (1997) pp.61-68.  

51) Yong Hwan Kim, Ryosuke O.Suzuki, Hiroshi Numakura, Hirobumi Wada and Katsutoshi Ono,

    "Removal of Oxygen and Nitrogen from Niobium by External Gettering",

    J. Alloys and Compounds, 248 (1997) pp.251-258.   

50) T.Hidani, K.Takemura, R.O.Suzuki and K.Ono,

    "Removal of copper from steel scraps by NH3 gas",

    Kinzoku(Metals & Technology), (1996) August Special Issue, pp.55-66.

49) T.Hidani, K.Takemura, R.O.Suzuki and K.Ono,

    "Elimination of Copper from Molten Steel by Ammonia Gas Blowing",

    J. Iron and Steel Inst. Japan, 82, [2] (1996) pp.135-140.  

48) Y.Sudo, H.T.Takeshita, R.O.Suzuki, Y.Tomii, and K.Ono,

    "Quantitative SIMS Analysis in Ti-dilute Mo Alloys Using Isotopic Abundance",

    J.Japan Inst. Metals, 60, [4] (1996) pp.406-411.  

47) H.T.Takeshita, T.Kagawa, R.O.Suzuki, T.Oishi and K.Ono,

    "Quantitative SIMS Analysis of Trace Metallic Impurities in High Purity Copper",

    J.Japan Inst. Metals, 60, [3] (1996) pp.290-294.  

46) H.T.Takeshita, Y.Tomii, R.O.Suzuki, and K.Ono,

    "Local Quantitative SIMS Analysis of Small Amount of Oxygen in Titanium",

    J.Japan Inst. Metals, 59, [9] (1995) pp.973-977.  

45) T.F.Kumon, R.O.Suzuki, and K.Ono,

    "Oxidation Resistant Coating of Niobium by Combining Hot Dipping in Molten Aluminum Coating and Anodic Oxidation",

    J.Japan Inst. Metals, 59, [9] (1995) pp.967-972.  

44) K.Ono, E.Ichise, R.O.Suzuki, and T.Hidani,

    "Elimination of copper from the molten steel by NH3 blowing under reduced pressure",

    Steel Research, 66, [9] (1995) pp.372-376. DOI: 10.1002/srin.199501140 

43) Y.H.Kim, R.O.Suzuki, and K.Ono,

    "Preparation of High Purity Niobium by Electron Beam Melting and External Gettering",

    Proc. Conf. Electron Beam Melting & Refining - State of the Art 1994, (Reno, USA Oct., 1994),

    ed. by R. Bakish, (Bakish Materials Corp. Publ., NJ, USA, 1994) pp.141-155. SciTech Connect

42) R.O.Suzuki, H.Nishiura, K.Ono, and L.J.Gauckler 

    "Thermodynamics and Phase Diagram of the Ag-Cu-O System"

    Proc. 7th Inter. Symp. on Superconductivity ("ISS'94", Kita-kyushu, JAPAN, Nov., 8-11, 1994),

    "Advances in Superconductivity VII", ed. by K.Yamafuji and T. Morishita, 

    (Springer-Verlag, Tokyo, Japan 1995) Vol.1, pp.373-376. 

41) R.O.Suzuki, K.Ono, and L.J.Gauckler,

    "Phase Equilibria in the Sr-Ca-Cu-O System",

    Proc. 7th Inter. Symp. on Superconductivity ("ISS'94", Kita-kyushu, JAPAN, Nov., 8-11, 1994) ,

    "Advances in Superconductivity VII", ed. by K.Yamafuji and T. Morishita,

    (Springer-Verlag, Tokyo, Japan 1995) Vol.1, pp.357-360. 

40) K.Ono, Y.H.KIM, T.F.Kumon, T.H.Okabe and R.O.Suzuki,

    "Extra-low Oxygen Niobium and Titanium to Produce Ultra-

    Clean Superconductive Nb-Ti Alloy" (Full text)

    Proc. of "Klaus Schulze Symposium on Processing and Applications of High Purity Refractory Metals and Alloys", 

    (Pittsburgh, USA, 18 Oct. 1993) ed. by P.Kumer, H.A.Jehn and M.Uz,

    (The Minerals, Metals & Materials Soc., USA, 1994) pp.179-187.

39) H.T.Takeshita, R.O.Suzuki and K. Ono,

    "SIMS Analysis of Light Elements in the Metals",

    Materia Japan, 33 [4] (1994) pp.356-361.  

38) R.O.Suzuki, P.Bohac and L.J.Gauckler,

    "Phase Equilibria and Thermodynamics in the Sr-Cu-O and Ca-Cu-O Systems",

    Proc. 5th Inter. Symp. on Superconductivity ("ISS'92", 

    Kobe, JAPAN, 1992) "Advances in Superconductivity V", 

    ed.by Y.Bando and H.Yamauchi, (Springer-Verlag, Tokyo, Japan 1993) pp.399-402. 

37) R.O.Suzuki, P.Bohac and L.J.Gauckler,

    "Thermodynamics and Phase Equilibria in the Ca-Cu-O System",

    J.Amer.Ceram.Soc., 77 [1] (1994) pp.41-48. 

36) R.Mueller, Th.Schweizer, P. Bohac, R.O.Suzuki and L.J.Gauckler,

    "Compositional Range of the Bi2Sr2CaCu2Ox HTc-Superconductor and its Surrounding Phases",

    Physica C203 (1992) pp.299-314. 

35) R.O.Suzuki, P.Bohac and L.J.Gauckler,

    "Thermodynamics and Phase Equilibria in the Sr-Cu-O System",

    J.Amer.Ceram.Soc., 75 [10] (1992) pp.2833-42. 

34) T.H.Okabe, R.O.Suzuki, T.Oishi and K.Ono,

    "Preparation of Extra Low Oxygen Titanium by the Calcium-Halaide Flux Deoxidaton Process",

    Proc. of Inter. Conf. of Titanium Products and Applications, (Florida,USA,1991). "Titanium 1990,

    Products  and Applications, Proceedings of the TechnicalProgram from the 1990 International Conference",

    (Titanium Developmennt Association, USA 1990) pp.822-29.

33) T.H.Okabe, R.O.Suzuki, T.Oishi and K.Ono,

    "Thermodynamic Properties of Dilute Titanium-Oxygen Solid Solution in Beta Phase",

    Material Trans. JIM., 32 [5] (1991) pp.485-488.  Mater Trans Online  

32) R.O.Suzuki, T.Ueki, M.Ikezawa, T.H.Okabe, T.Oishi and K.Ono

    "A Fundamental Study on Preparation of Al3Ti Powders by 

    Calciothermic Reduction of Oxides"

    Material Trans. JIM., 32 [3] (1991) pp.272-277.  Mater Trans Online 

31) T.H.Okabe, R.O.Suzuki, T.Oishi and K.Ono,

    "Production of Etra Low Oxygen Titanium by the Calcium-Halaide Flux Deoxidaton",

    J. Iron & Steel Inst. Jpn.(Tetsu-to-Hagane), 77 [1] (1991) pp.93-99.  

30) R.O.Suzuki,

    "Access Drawing tools on Personal Computors",

    Boundary, [June] (1990) pp.8-13. 

29) R.O.Suzuki, S.Okada, T.Oishi and K.Ono,

    "Thermodynamics of Y2Cu2O5 and YCuO2 and Phase Equilibria in the Ba-Y-Cu-O System",

    Materials Trans.,JIM., 31 [12] (1990) pp.1078-84.  Material Trans. Online 

28) S.Kambara, N.Omori, R.O.Suzuki, T.Oishi and K.Ono,

    "Determination of Oxygen Content in Ba2YCu3Ox in Equilibrium with Oxygen Pressure of 0.2 - 10 atm",

    J.Jpn.Ceram.Soc.Japan, Intern.Edition 98 [11] (1990) pp.1219-25.

27) S.Kambara, N.Omori, R.O.Suzuki, T.Oishi and K.Ono,

    "Determination of Oxygen Content in Ba2YCu3Ox in Equilibrium with Oxygen Pressure of 0.2 - 10 atm",

    J.Ceram.Soc.Japan, 98 [11] (1990) pp.1210-16.  

26) K.Ono, T.H.Okabe, M.Ogawa and R.O.Suzuki,

    "Production of Titanium Powders by the Calciothermic Reduction of TiO2",

    J. Iron & Steel Inst. Jpn.(Tetsu-to-Hagane), 76 [4] (1990) pp.568-575.  

25) R.O.Suzuki, S.Kambara, H.Tsuchida, K.Shimizu and K.Ono,

    "Phase Equilibria of Bi2O3-SrO-CaO-CuO System at 1123K in Air",

    Proc. 2nd Inter. Symp. on Superconductivity (Tukuba,JAPAN,1989) "Advances in Superconductivity II", 

    ed.by T.Ishiguro and K.Kajimura, (Springer-Verlag, Japan 1990) pp.235-238. Springer Link

24) R.O.Suzuki, M.Ikezawa, T.H.Okabe, T.Oishi and K.Ono,

    "Preparation of TiAl and Ti3Al Powders by Calciothermic Reduction of Oxides",

    Material Trans. JIM., 31 [1] (1990) pp.61-68.  Material Trans. Online 

23) R.O.Suzuki, H.Sakamoto, T.Oishi and K.Ono

    "Processes to Produce Ti-Al Alloy Powders by Calcium Co-

    Reduction from the Oxide"

    Mem.Etud.Sci.Rev.Metal., 86 [10] (1989) pp.655-658.

    (Re-print of Nr.18 because of the editor's selection)

22) R.O.Suzuki,

    "Preparation of Intermetallic Compounds by the Calciothermic Reaction",

    J. Adv. Sci., 1 [1] (1989) pp.69-73. 

21) K.Ono, S.Ueda and R.O.Suzuki,

    "High Temperature Chemical Reactions on Refining and Melting of Titanium"

    Bull. Jpn. Inst. Metals, 28 [8] (1989) pp.672-679. 

20) R.O.Suzuki,

    "Evaluation of Superconductivity on the Oxide Superconductors",

    J.Mining and Metall. Inst. Japan, 104 [7] (1988) pp.480-481. 

19) R.O.Suzuki, M.Ogawa, T.Oishi and K.Ono,

    "Preparation of Ti Powders by the Calcium Vapor Reduction of TiO2 and the Electron-Beam Melting",

    Proc. 6th World Conf. on Titanium 1988, (Cannes,France,1988), 

    Societe Francaise de Metallurgie, Paris, 1989, vol II, pp.701-706.

18) R.O.Suzuki, H.Sakamoto, T.Oishi and K.Ono,

    "Processes to Produce Ti-Al Alloy Powders by Calcium Co-Reduction from the Oxide",

    Proc. 6th World Conf. on Titanium 1988, (Cannes,France,1988), 

    Societe Francaise de Metallurgie, Paris, 1989, vol II, pp.889-900.

17) R.O.Suzuki, H.Nagai, T.Oishi and K.Ono

    "Processes to Produce Superconducting Nb3Sn Powders from Nb-Sn Oxide"

    J. Mater. Sci. 22 [6] (1987) pp.1999-2005.  

16) R.O.Suzuki, S.Tsuda and P.H.Shingu

    "Unidirectional Crystallization of Amorphous Te-Ge Alloy"

    J. Mater. Sci. Lett., 4 [12](1985) pp.1495-1497.  

15) P.H.Shingu, R.O.Suzuki and K.N.Ishihara

    "Thermodynamics of Amorphous Metals"

    Jpn. Solid State Phys., 20 [8] (1985) pp.593-601. 

14) R.O.Suzuki and P.H.Shingu

    "Kinetics of Enthalpy Relaxation of Metallic Glasses"

    Proc. 5Th. Int. Conf. on Rapidly Quenched Metals 

    (Wuertzburg,Germany,1984) pp.651-654.

13) S.R.Nishitani, K.N.Ishihara, R.O.Suzuki and P.H.Shingu

    "Metastable Solid Solubility Limit of Carbon in the Ni-C System"

    J. Mater. Sci. Lett., 4 (1985) pp.872-875.  

12) P.H.Shingu, R.O.Suzuki and K.N.Ishihara,

    "Crystallization of Amorphous Metals",

    J. Iron and Steel Inst. Japan, 70 [15] (1984) pp.1828-1832.  

11) R.O.Suzuki and K.Osamura,

    "SAXS Study on the Crystallization of Amorphous Pd76Au6Si18 Alloys",

    J. Mater. Sci. 19 [5](1984) pp.1476-1485. 

10) P.H.Shingu, R.O.Suzuki and K.N.Ishihara,

    "Rapid Quenchig and Metastable Equilibria",

    Bull. Japan Materials Soc., 33 [366](1984) p.239-245. 

 9) R.O.Suzuki and P.H.Shingu,

    "Enthalpy Relaxation of Metallic Glasses near Tg",

    Proc. 5th Int. Conf. Liquid and Amorphous Metals, (Los Angels,USA,1983),

    J. Non-Cryst. Solids, 61&62 (1984) pp.1003-1008. 

 8) R.O.Suzuki, Y.Komatsu, K.F.Kobayashi and P.H.Shingu,

    "Formation and Crystallzation of Al-Fe-Si Amorphous Alloys",

    J. Mater. Sci., 18 [4] (1983) pp.1195-1201.  

 7) R.O.Suzuki, K.Shibue, K.Osamura, P.H.Shingu and Y.Murakami,

    "DSC Study of Pd76Si18Au6 Amorphous Alloy",

    J. Mater. Sci. Lett., 1 [1] (1982) pp.127-130. 

 6) P.H.Shingu, K.F.Kobayashi, R.O.Suzuki and K.Takeshita,

    "Cooling Process of the Single Roller Chill Block Casting",

    Proc. 4th Int. Conf. on Rapidly Quenched Metals, (Sendai,Japan,1981) Vol.1, pp.57-60.

 5) Y.Sakamoto, H.Miyamoto, P.H.Shingu, R.O.Suzuki and S.Takayama,

    "Diffusion of Hydrogen through Amorphous Pd82Si18 and Pd76Si18Au6 Alloys",

    Proc. 4th Int. Conf. on Rapidly Quenched Metals, (Sendai,Japan,1981) Vol.2, pp.1645-1648.

 4) K.Osamura, R.O.Suzuki and Y.Murakami,

    "SAXS Study on the Structure of Amorphous Metallic Alloys",

    Proc. 4th Int. Conf. on Rapidly Quenched Metals, (Sendai,Japan,1981) Vol.1, pp.431-434.

 3) K.Osamura, K.Shibue, R.O.Suzuki and Y.Murakami,

    "SAXS Study on the Structure and Crystallization of Amorphous Metallic Alloys",

    Colloid & Polymer Sci., 259 (1981) p.677-682. 

 2) K.Osamura, K.Shibue, R.O.Suzuki, Y.Murakami and S.Takayama,

    "Study of the Structure and Crystallization of an Fe-17at%B Amorphous Alloy",

    J. Mater. Sci., 16 [4](1981) pp.957-967. 

 1) K.Osamura, K.Shibue, R.O.Suzuki and Y.Murakami,

    "SAXS Study on the Structure and Crystallization of Amorphous Metallic Alloys",

    Suppl. to Sci. Rep. RITU., A28,[3] No.1 (1980) pp.65-75.


<-- Back